Re: [PATCH v2] drm/bridge: dw-mipi-dsi.c: Add VPG runtime config through debugfs

From: Philippe CORNU
Date: Thu Jul 09 2020 - 03:56:46 EST



On 7/8/20 7:08 PM, Angelo Ribeiro wrote:
> Hi,
>
> Is this patch good to go?
> @daniel@xxxxxxxx, @Philippe CORNU
>
> Was already tested by @Yannick FERTRE
> and @Adrian Pop
> on https://lkml.org/lkml/2020/4/6/691 .
>
> Thanks,
> Angelo
>
> From: Yannick
> FERTRE <yannick.fertre@xxxxxx>
> Date: Wed, Jun 24, 2020 at 16:35:04
>
>> Hello Angelo,
>> thanks for the patch.
>> Tested-by: Yannick Fertre <yannick.fertre@xxxxxx>
>> Tested OK on STM32MP1-DISCO, DSI v1.31
>>
>> Best regards
>>
>>
>> On 4/6/20 3:49 PM, Angelo Ribeiro wrote:
>>> Add support for the video pattern generator (VPG) BER pattern mode and
>>> configuration in runtime.
>>>
>>> This enables using the debugfs interface to manipulate the VPG after
>>> the pipeline is set.
>>> Also, enables the usage of the VPG BER pattern.
>>>
>>> Changes in v2:
>>> - Added VID_MODE_VPG_MODE
>>> - Solved incompatible return type on __get and __set
>>>
>>> Reported-by: kbuild test robot <lkp@xxxxxxxxx>
>>> Reported-by: Adrian Pop <pop.adrian61@xxxxxxxxx>
>>> Cc: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
>>> Cc: Joao Pinto <jpinto@xxxxxxxxxxxx>
>>> Cc: Jose Abreu <jose.abreu@xxxxxxxxxxxx>
>>> Signed-off-by: Angelo Ribeiro <angelo.ribeiro@xxxxxxxxxxxx>
>>> ---
>>> drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 98 ++++++++++++++++++++++++---
>>> 1 file changed, 90 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>>> index b18351b..9de3645 100644
>>> --- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>>> @@ -91,6 +91,7 @@
>>> #define VID_MODE_TYPE_BURST 0x2
>>> #define VID_MODE_TYPE_MASK 0x3
>>> #define VID_MODE_VPG_ENABLE BIT(16)
>>> +#define VID_MODE_VPG_MODE BIT(20)
>>> #define VID_MODE_VPG_HORIZONTAL BIT(24)
>>>
>>> #define DSI_VID_PKT_SIZE 0x3c
>>> @@ -221,6 +222,21 @@
>>> #define PHY_STATUS_TIMEOUT_US 10000
>>> #define CMD_PKT_STATUS_TIMEOUT_US 20000
>>>
>>> +#ifdef CONFIG_DEBUG_FS
>>> +#define VPG_DEFS(name, dsi) \
>>> + ((void __force *)&((*dsi).vpg_defs.name))
>>> +
>>> +#define REGISTER(name, mask, dsi) \
>>> + { #name, VPG_DEFS(name, dsi), mask, dsi }
>>> +
>>> +struct debugfs_entries {
>>> + const char *name;
>>> + bool *reg;
>>> + u32 mask;
>>> + struct dw_mipi_dsi *dsi;
>>> +};
>>> +#endif /* CONFIG_DEBUG_FS */
>>> +
>>> struct dw_mipi_dsi {
>>> struct drm_bridge bridge;
>>> struct mipi_dsi_host dsi_host;
>>> @@ -238,9 +254,12 @@ struct dw_mipi_dsi {
>>>
>>> #ifdef CONFIG_DEBUG_FS
>>> struct dentry *debugfs;
>>> -
>>> - bool vpg;
>>> - bool vpg_horizontal;
>>> + struct debugfs_entries *debugfs_vpg;
>>> + struct {
>>> + bool vpg;
>>> + bool vpg_horizontal;
>>> + bool vpg_ber_pattern;
>>> + } vpg_defs;
>>> #endif /* CONFIG_DEBUG_FS */
>>>
>>> struct dw_mipi_dsi *master; /* dual-dsi master ptr */
>>> @@ -530,9 +549,11 @@ static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
>>> val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
>>>
>>> #ifdef CONFIG_DEBUG_FS
>>> - if (dsi->vpg) {
>>> + if (dsi->vpg_defs.vpg) {
>>> val |= VID_MODE_VPG_ENABLE;
>>> - val |= dsi->vpg_horizontal ? VID_MODE_VPG_HORIZONTAL : 0;
>>> + val |= dsi->vpg_defs.vpg_horizontal ?
>>> + VID_MODE_VPG_HORIZONTAL : 0;
>>> + val |= dsi->vpg_defs.vpg_ber_pattern ? VID_MODE_VPG_MODE : 0;
>>> }
>>> #endif /* CONFIG_DEBUG_FS */
>>>
>>> @@ -961,6 +982,68 @@ static const struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
>>>
>>> #ifdef CONFIG_DEBUG_FS
>>>
>>> +int dw_mipi_dsi_debugfs_write(void *data, u64 val)
>>> +{
>>> + struct debugfs_entries *vpg = data;
>>> + struct dw_mipi_dsi *dsi;
>>> + u32 mode_cfg;
>>> +
>>> + if (!vpg)
>>> + return -ENODEV;
>>> +
>>> + dsi = vpg->dsi;
>>> +
>>> + *vpg->reg = (bool)val;
>>> +
>>> + mode_cfg = dsi_read(dsi, DSI_VID_MODE_CFG);
>>> +
>>> + if (*vpg->reg)
>>> + mode_cfg |= vpg->mask;
>>> + else
>>> + mode_cfg &= ~vpg->mask;
>>> +
>>> + dsi_write(dsi, DSI_VID_MODE_CFG, mode_cfg);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +int dw_mipi_dsi_debugfs_show(void *data, u64 *val)
>>> +{
>>> + struct debugfs_entries *vpg = data;
>>> +
>>> + if (!vpg)
>>> + return -ENODEV;
>>> +
>>> + *val = *vpg->reg;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +DEFINE_DEBUGFS_ATTRIBUTE(fops_x32, dw_mipi_dsi_debugfs_show,
>>> + dw_mipi_dsi_debugfs_write, "%llu\n");
>>> +
>>> +static void debugfs_create_files(void *data)
>>> +{
>>> + struct dw_mipi_dsi *dsi = data;
>>> + struct debugfs_entries debugfs[] = {
>>> + REGISTER(vpg, VID_MODE_VPG_ENABLE, dsi),
>>> + REGISTER(vpg_horizontal, VID_MODE_VPG_HORIZONTAL, dsi),
>>> + REGISTER(vpg_ber_pattern, VID_MODE_VPG_MODE, dsi),
>>> + };
>>> + int i;
>>> +
>>> + dsi->debugfs_vpg = kmalloc(sizeof(debugfs), GFP_KERNEL);
>>> + if (!dsi->debugfs_vpg)
>>> + return;
>>> +
>>> + memcpy(dsi->debugfs_vpg, debugfs, sizeof(debugfs));
>>> +
>>> + for (i = 0; i < ARRAY_SIZE(debugfs); i++)
>>> + debugfs_create_file(dsi->debugfs_vpg[i].name, 0644,
>>> + dsi->debugfs, &dsi->debugfs_vpg[i],
>>> + &fops_x32);
>>> +}
>>> +
>>> static void dw_mipi_dsi_debugfs_init(struct dw_mipi_dsi *dsi)
>>> {
>>> dsi->debugfs = debugfs_create_dir(dev_name(dsi->dev), NULL);
>>> @@ -969,14 +1052,13 @@ static void dw_mipi_dsi_debugfs_init(struct dw_mipi_dsi *dsi)
>>> return;
>>> }
>>>
>>> - debugfs_create_bool("vpg", 0660, dsi->debugfs, &dsi->vpg);
>>> - debugfs_create_bool("vpg_horizontal", 0660, dsi->debugfs,
>>> - &dsi->vpg_horizontal);
>>> + debugfs_create_files(dsi);

Hi Angelo,
And thank you for your patch.
Could you please explain why you have "so many lines" for adding the ber
pattern, instead of these 4 lines :

+#define VID_MODE_VPG_MODE BIT(20)
+bool vpg_ber_pattern;
+val |= dsi->vpg_ber_pattern ? VID_MODE_VPG_MODE : 0;
+debugfs_create_bool("vpg_ber_pattern", 0660, dsi->debugfs,
&dsi->vpg_ber_pattern);

Many thanks
Philippe :-)

>>> }
>>>
>>> static void dw_mipi_dsi_debugfs_remove(struct dw_mipi_dsi *dsi)
>>> {
>>> debugfs_remove_recursive(dsi->debugfs);
>>> + kfree(dsi->debugfs_vpg);
>>> }
>>>
>>> #else
>>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@xxxxxxxxxxxxxxxxxxxxx
>> https://urldefense.com/v3/__https://lists.freedesktop.org/mailman/listinfo/dri-devel__;!!A4F2R9G_pg!PaD758-TpCHJcJG4biB5oM3WJXd1mTbLitD8K1qzSVQ4Z06nc__06MR_sz-ITMIl$
>
>