Re: [PATCH] clk: rockchip: mark pclk_uart2 as critical on rk3328

[Johan Jonker]

Hi Elaine, Robin,

Thank you for your help!
This patch can go in the garbage bin.
It turns out that with SERIAL_8250 also SERIAL_8250_DW must be
selected... ;)

It's not in the Kconfig help description.
Shouldn't that be automatically be included for Rockchip?
Example:

config SERIAL_8250
	tristate "8250/16550 and compatible serial support"
	depends on !S390
	select SERIAL_CORE
	select SERIAL_MCTRL_GPIO if GPIOLIB
	select SERIAL_8250_DW if ARCH_ROCKCHIP

Thank Robin for the introduction to FTRACE!

mount -t tracefs tracefs /sys/kernel/tracing

cd /sys/kernel/tracing

# Without SERIAL_8250_DW

/sys/kernel/tracing # cat trace | grep uart2
          <idle>-0     [000] d..2     0.000000: clk_enable: clk_uart2_div
          <idle>-0     [000] d..2     0.000000: clk_enable: clk_uart2_frac
          <idle>-0     [000] d..2     0.000000: clk_disable: clk_uart2_frac
          <idle>-0     [000] d..2     0.000000: clk_disable: clk_uart2_div
       swapper/0-1     [002] d..1     1.916746: clk_disable: pclk_uart2


/sys/kernel/tracing # cat trace | grep uart
          <idle>-0     [000] d..2     0.000000: clk_enable: clk_uart2_div
          <idle>-0     [000] d..2     0.000000: clk_enable: clk_uart2_frac
          <idle>-0     [000] d..2     0.000000: clk_disable: clk_uart2_frac
          <idle>-0     [000] d..2     0.000000: clk_disable: clk_uart2_div
          <idle>-0     [000] d..2     0.000000: clk_enable: clk_uart1_div
          <idle>-0     [000] d..2     0.000000: clk_enable: clk_uart1_frac
          <idle>-0     [000] d..2     0.000000: clk_disable: clk_uart1_frac
          <idle>-0     [000] d..2     0.000000: clk_disable: clk_uart1_div
          <idle>-0     [000] d..2     0.000000: clk_enable: clk_uart0_div
          <idle>-0     [000] d..2     0.000000: clk_enable: clk_uart0_frac
          <idle>-0     [000] d..2     0.000000: clk_disable: clk_uart0_frac
          <idle>-0     [000] d..2     0.000000: clk_disable: clk_uart0_div
       swapper/0-1     [002] d..1     1.916746: clk_disable: pclk_uart2
       swapper/0-1     [002] d..1     1.923959: clk_disable: pclk_uart1
       swapper/0-1     [002] d..1     1.930741: clk_disable: pclk_uart0

# With SERIAL_8250_DW

/sys/kernel/tracing # cat trace | grep uart2
          <idle>-0     [000] d..2     0.000000: clk_enable: clk_uart2_div
          <idle>-0     [000] d..2     0.000000: clk_enable: clk_uart2_frac
          <idle>-0     [000] d..2     0.000000: clk_disable: clk_uart2_frac
          <idle>-0     [000] d..2     0.000000: clk_disable: clk_uart2_div
       swapper/0-1     [002] d..1     0.923180: clk_enable: sclk_uart2
       swapper/0-1     [002] d..1     0.923224: clk_enable: pclk_uart2
       swapper/0-1     [002] d..1     0.925259: clk_disable: sclk_uart2
       swapper/0-1     [002] d..1     0.925295: clk_enable: sclk_uart2
       swapper/0-1     [003] d..1     2.208605: clk_disable: sclk_uart2
       swapper/0-1     [003] d..1     2.208646: clk_enable: sclk_uart2

/sys/kernel/tracing # cat trace | grep uart
          <idle>-0     [000] d..2     0.000000: clk_enable: clk_uart2_div
          <idle>-0     [000] d..2     0.000000: clk_enable: clk_uart2_frac
          <idle>-0     [000] d..2     0.000000: clk_disable: clk_uart2_frac
          <idle>-0     [000] d..2     0.000000: clk_disable: clk_uart2_div
          <idle>-0     [000] d..2     0.000000: clk_enable: clk_uart1_div
          <idle>-0     [000] d..2     0.000000: clk_enable: clk_uart1_frac
          <idle>-0     [000] d..2     0.000000: clk_disable: clk_uart1_frac
          <idle>-0     [000] d..2     0.000000: clk_disable: clk_uart1_div
          <idle>-0     [000] d..2     0.000000: clk_enable: clk_uart0_div
          <idle>-0     [000] d..2     0.000000: clk_enable: clk_uart0_frac
          <idle>-0     [000] d..2     0.000000: clk_disable: clk_uart0_frac
          <idle>-0     [000] d..2     0.000000: clk_disable: clk_uart0_div
       swapper/0-1     [002] d..1     0.920034: clk_enable: sclk_uart0
       swapper/0-1     [002] d..1     0.920085: clk_enable: pclk_uart0
     kworker/2:1-32    [002] d..1     0.922596: clk_disable: sclk_uart0
     kworker/2:1-32    [002] d..1     0.922613: clk_disable: pclk_uart0
       swapper/0-1     [002] d..1     0.923180: clk_enable: sclk_uart2
       swapper/0-1     [002] d..1     0.923224: clk_enable: pclk_uart2
       swapper/0-1     [002] d..1     0.925259: clk_disable: sclk_uart2
       swapper/0-1     [002] d..1     0.925295: clk_enable: sclk_uart2
       swapper/0-1     [003] d..1     1.914158: clk_disable: pclk_uart1
       swapper/0-1     [003] d..1     2.208605: clk_disable: sclk_uart2
       swapper/0-1     [003] d..1     2.208646: clk_enable: sclk_uart2



On 7/9/20 3:32 AM, elaine.zhang wrote:
> å 2020/7/8 äå10:45, Johan Jonker åé:
>> The rk3328 uart2 port is used as boot console and to debug.
>> During the boot pclk_uart2 is disabled by a clk_disable_unused
>> initcall. Fix the uart2 function by marking pclk_uart2
>> as critical on rk3328. Also add sclk_uart2 as that is needed
>> for the same DT node.
>>
>> Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>
>> ---
>> Â drivers/clk/rockchip/clk-rk3328.c | 2 ++
>> Â 1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/clk/rockchip/clk-rk3328.c
>> b/drivers/clk/rockchip/clk-rk3328.c
>> index c186a1985..cb7749cb7 100644
>> --- a/drivers/clk/rockchip/clk-rk3328.c
>> +++ b/drivers/clk/rockchip/clk-rk3328.c
>> @@ -875,6 +875,8 @@ static const char *const rk3328_critical_clocks[]
>> __initconst = {
>> ÂÂÂÂÂ "aclk_gmac_niu",
>> ÂÂÂÂÂ "pclk_gmac_niu",
>> ÂÂÂÂÂ "pclk_phy_niu",
>> +ÂÂÂ "pclk_uart2",
>> +ÂÂÂ "sclk_uart2",
>> Â };
>> Â 
> 
> Not need to mark the uart2 as critical clocks, the uart clk will enabled
> by uart driver probe(dw8250_probe()).
> 
> For your question, Please check the uart2 dts node "status = okay".
> 
> Or You can send me the complete log, I check the status of uart2.
> 
>> Â static void __init rk3328_clk_init(struct device_node *np)
> 
>