Re: [PATCH] usb: gadget: bdc: use readl_poll_timeout() to simplify code

[Chunfeng Yun]

On Fri, 2020-07-10 at 16:37 -0700, Stephen Boyd wrote:
> Quoting Chunfeng Yun (2020-07-09 20:30:56)
> > diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
> > index 02a3a77..fa173de 100644
> > --- a/drivers/usb/gadget/udc/bdc/bdc_core.c
> > +++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
> > @@ -32,21 +33,14 @@
> >  static int poll_oip(struct bdc *bdc, int usec)
> 
> Can we change usec to unsigned? Not sure why negative time is important.
Yes, it's sensible to use unsigned.

> 
> >  {
> >         u32 status;
> > -       /* Poll till STS!= OIP */
> > -       while (usec) {
> > -               status = bdc_readl(bdc->regs, BDC_BDCSC);
> > -               if (BDC_CSTS(status) != BDC_OIP) {
> > -                       dev_dbg(bdc->dev,
> > -                               "poll_oip complete status=%d",
> > -                               BDC_CSTS(status));
> 
> This debug message was lost in the conversion. Any reason?
No, will add it back
> 
> > -                       return 0;
> > -               }
> > -               udelay(10);
> > -               usec -= 10;
> > -       }
> > -       dev_err(bdc->dev, "Err: operation timedout BDCSC: 0x%08x\n", status);
> > +       int ret;
> >  
> > -       return -ETIMEDOUT;
> > +       ret = readl_poll_timeout(bdc->regs + BDC_BDCSC, status,
> > +               (BDC_CSTS(status) != BDC_OIP), 10, usec);
> > +       if (ret)
> > +               dev_err(bdc->dev, "Err: operation timedout BDCSC: 0x%08x\n", status);
> 
> Please drop "Err:" as we have kernel log levels (i.e. dev_err() used
> here) for that.
Ok

Thanks

> 
> > +
> > +       return ret;
> >  }