Re: [PATCH v6 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml

[Rob Herring]

On Sun, 12 Jul 2020 12:44:10 +0800, Chris Ruehl wrote:
> Add documentation for the newly added DTS support in the shtc1 driver.
> To align with the drivers logic to have high precision by default
> a boolean sensirion,low_precision is used to switch to low precision.
> 
> Signed-off-by: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
> ---
>  .../bindings/hwmon/sensirion,shtc1.yaml       | 57 +++++++++++++++++++
>  1 file changed, 57 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dts:24.13-26: Warning (reg_format): /example-0/i2c1/shtc3@70:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dts:22.20-26.13: Warning (avoid_default_addr_size): /example-0/i2c1/shtc3@70: Relying on default #address-cells value
Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dts:22.20-26.13: Warning (avoid_default_addr_size): /example-0/i2c1/shtc3@70: Relying on default #size-cells value
Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'


See https://patchwork.ozlabs.org/patch/1327453

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.