Re: [PATCH 3/3] arm64: dts: sc7180: Add OPP tables and power-domains for venus

[Matthias Kaehlcke]

On Thu, Jul 02, 2020 at 02:26:14PM +0530, Rajendra Nayak wrote:
> 
> On 7/1/2020 10:24 PM, Matthias Kaehlcke wrote:
> > On Wed, Jul 01, 2020 at 05:10:38PM +0530, Rajendra Nayak wrote:
> > > Add the OPP tables in order to be able to vote on the performance state
> > > of a power-domain
> > > 
> > > Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
> > > ---
> > >   arch/arm64/boot/dts/qcom/sc7180.dtsi | 35 +++++++++++++++++++++++++++++++++--
> > >   1 file changed, 33 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > > index ad57df2..738a741 100644
> > > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > > @@ -2392,8 +2392,10 @@
> > >   			reg = <0 0x0aa00000 0 0xff000>;
> > >   			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
> > >   			power-domains = <&videocc VENUS_GDSC>,
> > > -					<&videocc VCODEC0_GDSC>;
> > > -			power-domain-names = "venus", "vcodec0";
> > > +					<&videocc VCODEC0_GDSC>,
> > > +					<&rpmhpd SC7180_CX>;
> > > +			power-domain-names = "venus", "vcodec0", "opp-pd";
> > > +			operating-points-v2 = <&venus_opp_table>;
> > >   			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
> > >   				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
> > >   				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
> > > @@ -2414,6 +2416,35 @@
> > >   			video-encoder {
> > >   				compatible = "venus-encoder";
> > >   			};
> > > +
> > > +			venus_opp_table: venus-opp-table {
> > > +				compatible = "operating-points-v2";
> > > +
> > > +				opp-200000000 {
> > > +					opp-hz = /bits/ 64 <150000000>;
> > > +					required-opps = <&rpmhpd_opp_low_svs>;
> > > +				};
> > > +
> > > +				opp-320000000 {
> > > +					opp-hz = /bits/ 64 <270000000>;
> > > +					required-opps = <&rpmhpd_opp_svs>;
> > > +				};
> > > +
> > > +				opp-380000000 {
> > > +					opp-hz = /bits/ 64 <340000000>;
> > > +					required-opps = <&rpmhpd_opp_svs_l1>;
> > > +				};
> > > +
> > > +				opp-444000000 {
> > > +					opp-hz = /bits/ 64 <434000000>;
> > > +					required-opps = <&rpmhpd_opp_nom>;
> > > +				};
> > > +
> > > +				opp-533000000 {
> > > +					opp-hz = /bits/ 64 <500000000>;
> > > +					required-opps = <&rpmhpd_opp_turbo>;
> > > +				};
> > 
> > the labels of the OPP nodes don't match the specified frequencies
> 
> Oops, I'll fix and respin.

ping, it seems the respin is still pending