Re: [PATCH net-next v6 1/4] net: phy: add USXGMII link partner ability constants

[Michael Walle]

Am 2020-07-13 20:37, schrieb Michael Walle:
> Am 2020-07-13 20:23, schrieb Russell King - ARM Linux admin:
> > On Thu, Jul 09, 2020 at 11:35:23PM +0200, Michael Walle wrote:
> > > The constants are taken from the USXGMII Singleport Copper Interface
> > > specification. The naming are based on the SGMII ones, but with an 
> > > MDIO_
> > > prefix.
> > >
> > > Signed-off-by: Michael Walle <michael@xxxxxxxx>
> > > ---
> > >  include/uapi/linux/mdio.h | 26 ++++++++++++++++++++++++++
> > >  1 file changed, 26 insertions(+)
> > >
> > > diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h
> > > index 4bcb41c71b8c..784723072578 100644
> > > --- a/include/uapi/linux/mdio.h
> > > +++ b/include/uapi/linux/mdio.h
> > > @@ -324,4 +324,30 @@ static inline __u16 mdio_phy_id_c45(int prtad, 
> > > int devad)
> > >  	return MDIO_PHY_ID_C45 | (prtad << 5) | devad;
> > >  }
> > >
> > > +/* UsxgmiiChannelInfo[15:0] for USXGMII in-band auto-negotiation.*/
> > > +#define MDIO_LPA_USXGMII_EEE_CLK_STP	0x0080	/* EEE clock stop 
> > > supported */
> > > +#define MDIO_LPA_USXGMII_EEE		0x0100	/* EEE supported */
> > > +#define MDIO_LPA_USXGMII_SPD_MASK	0x0e00	/* USXGMII speed mask */
> > > +#define MDIO_LPA_USXGMII_FULL_DUPLEX	0x1000	/* USXGMII full duplex 
> > > */
> > > +#define MDIO_LPA_USXGMII_DPX_SPD_MASK	0x1e00	/* USXGMII duplex and 
> > > speed bits */
> > > +#define MDIO_LPA_USXGMII_10		0x0000	/* 10Mbps */
> > > +#define MDIO_LPA_USXGMII_10HALF		0x0000	/* 10Mbps half-duplex */
> > > +#define MDIO_LPA_USXGMII_10FULL		0x1000	/* 10Mbps full-duplex */
> > > +#define MDIO_LPA_USXGMII_100		0x0200	/* 100Mbps */
> > > +#define MDIO_LPA_USXGMII_100HALF	0x0200	/* 100Mbps half-duplex */
> > > +#define MDIO_LPA_USXGMII_100FULL	0x1200	/* 100Mbps full-duplex */
> > > +#define MDIO_LPA_USXGMII_1000		0x0400	/* 1000Mbps */
> > > +#define MDIO_LPA_USXGMII_1000HALF	0x0400	/* 1000Mbps half-duplex */
> > > +#define MDIO_LPA_USXGMII_1000FULL	0x1400	/* 1000Mbps full-duplex */
> > > +#define MDIO_LPA_USXGMII_10G		0x0600	/* 10Gbps */
> > > +#define MDIO_LPA_USXGMII_10GHALF	0x0600	/* 10Gbps half-duplex */
> > > +#define MDIO_LPA_USXGMII_10GFULL	0x1600	/* 10Gbps full-duplex */
> > > +#define MDIO_LPA_USXGMII_2500		0x0800	/* 2500Mbps */
> > > +#define MDIO_LPA_USXGMII_2500HALF	0x0800	/* 2500Mbps half-duplex */
> > > +#define MDIO_LPA_USXGMII_2500FULL	0x1800	/* 2500Mbps full-duplex */
> > > +#define MDIO_LPA_USXGMII_5000		0x0a00	/* 5000Mbps */
> > > +#define MDIO_LPA_USXGMII_5000HALF	0x0a00	/* 5000Mbps half-duplex */
> > > +#define MDIO_LPA_USXGMII_5000FULL	0x1a00	/* 5000Mbps full-duplex */
> > > +#define MDIO_LPA_USXGMII_LINK		0x8000	/* PHY link with copper-side 
> > > partner */
> >
> > btw, the only thing which is missing from this is bit 0.
>
> TBH, I didn't know how to name it. Any suggestions?

NXP calls it ABIL0, in xilinx docs its called USXGMII [1]. In the 
USXGMII
spec, its "set to 1 (0 is SGMII)" which I don't understand because its
also 1 for SGMII, right? At least as described in the tx_configReg[15:0] 
in
the SGMII spec.

#define MDIO_USXGMII_USXGMII 0x0001 ?

-michael

[1] 
https://www.xilinx.com/support/documentation/ip_documentation/usxgmii/v1_0/pg251-usxgmii.pdf