Re: [PATCH] ARM: dts: stm32: Correct spi4 pins in stm32mp15-pinctrl.dtsi

[Manivannan Sadhasivam]

On Wed, Jul 08, 2020 at 01:43:24PM +0200, Patrick Delaunay wrote:
> Move spi4_pins_a nodes from pinctrl_z to pinctrl
> as the associated pins are not in BANK Z.
>

Yikes, that's a nasty misplacement! Thanks for fixing.

> Fixes: 498a7014989dfdd9a47864b55704dc829ed0dc90

Fixes tag should be of below:

Fixes: 498a7014989d ("ARM: dts: stm32: Add missing pinctrl entries for STM32MP15")

> Signed-off-by: Patrick Delaunay <patrick.delaunay@xxxxxx>

Reviewed-by: Manivannan Sadhasivam <mani@xxxxxxxxxx>

Thanks,
Mani

> ---
> 
>  arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 28 ++++++++++++------------
>  1 file changed, 14 insertions(+), 14 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> index 7eb858732d6d..6aedbd7077ff 100644
> --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> @@ -1574,6 +1574,20 @@
>  		};
>  	};
>  
> +	spi4_pins_a: spi4-0 {
> +		pins {
> +			pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */
> +				 <STM32_PINMUX('E', 6, AF5)>;  /* SPI4_MOSI */
> +			bias-disable;
> +			drive-push-pull;
> +			slew-rate = <1>;
> +		};
> +		pins2 {
> +			pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */
> +			bias-disable;
> +		};
> +	};
> +
>  	usart2_pins_a: usart2-0 {
>  		pins1 {
>  			pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
> @@ -1776,18 +1790,4 @@
>  			bias-disable;
>  		};
>  	};
> -
> -	spi4_pins_a: spi4-0 {
> -		pins {
> -			pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */
> -				 <STM32_PINMUX('E', 6, AF5)>;  /* SPI4_MOSI */
> -			bias-disable;
> -			drive-push-pull;
> -			slew-rate = <1>;
> -		};
> -		pins2 {
> -			pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */
> -			bias-disable;
> -		};
> -	};
>  };
> -- 
> 2.17.1
>