[RESEND PATCH v2 0/2] Adding USB dual-role switching support for colibri-imx6/7 with extcon

[Philippe Schenker]

Hi Shawn,

This is a friendly reminder as I think the two patches in this patchset
got forgotten to pull back in.

Ahmad pointed out that extcon is legacy and I should better use the new
gpio-usb-b-connector compatible for that purpose. You removed those two
patches upon this recommendation.

In the meantime it turned out that I cannot use the new usb-connector
way of switching usb dual-role. This is due to Chipidea driver not
supporting it and Ahmad is fine using extcon for it.

I would be glad if you could pull those two patches back in.

Thanks,
Philippe


Philippe Schenker (2):
  ARM: dts: colibri-imx6: add usb dual-role switch capability
  ARM: dts: colibri-imx7: add usb dual-role switch capability

 arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 8 ++++++++
 arch/arm/boot/dts/imx6qdl-colibri.dtsi       | 2 +-
 arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi  | 9 +++++++++
 arch/arm/boot/dts/imx7-colibri.dtsi          | 4 ++--
 4 files changed, 20 insertions(+), 3 deletions(-)

-- 
2.27.0