Re: [PATCH v3 2/4] clocksource/drivers: Add CLINT timer driver

From: Anup Patel
Date: Fri Jul 17 2020 - 01:57:23 EST

Next message: Bjorn Andersson: "Re: [PATCH v6 9/9] remoteproc: Properly handle firmware name when attaching"
Previous message: Stephen Rothwell: "linux-next: build failure after merge of the kvm tree"
In reply to: Daniel Lezcano: "Re: [PATCH v3 2/4] clocksource/drivers: Add CLINT timer driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Fri, Jul 17, 2020 at 10:58 AM Daniel Lezcano
<daniel.lezcano@xxxxxxxxxx> wrote:
>
> On 17/07/2020 07:21, Anup Patel wrote:
> > On Fri, Jul 17, 2020 at 2:57 AM Daniel Lezcano
> > <daniel.lezcano@xxxxxxxxxx> wrote:
> >>
> >>
> >> Hi Anup,
> >>
> >>
> >> On 15/07/2020 09:15, Anup Patel wrote:
> >>> The TIME CSR and SBI calls are not available in RISC-V M-mode so we
> >>> separate add CLINT driver for Linux RISC-V M-mode (i.e. RISC-V NoMMU
> >>> kernel).
> >>
> >> The description is confusing, please reword it and give a bit more
> >> information about the timer itself, especially, the IPI thing.
> >
> > Okay, will update.
> >
> >>
> >>> Signed-off-by: Anup Patel <anup.patel@xxxxxxx>
> >>> ---
> >>> drivers/clocksource/Kconfig | 10 ++
> >>> drivers/clocksource/Makefile | 1 +
> >>> drivers/clocksource/timer-clint.c | 229 ++++++++++++++++++++++++++++++
> >>> include/linux/cpuhotplug.h | 1 +
> >>> 4 files changed, 241 insertions(+)
> >>> create mode 100644 drivers/clocksource/timer-clint.c
> >>>
> >>> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> >>> index 91418381fcd4..eabcf1cfb0c0 100644
> >>> --- a/drivers/clocksource/Kconfig
> >>> +++ b/drivers/clocksource/Kconfig
> >>> @@ -658,6 +658,16 @@ config RISCV_TIMER
> >>> is accessed via both the SBI and the rdcycle instruction. This is
> >>> required for all RISC-V systems.
> >>>
> >>> +config CLINT_TIMER
> >>> + bool "Timer for the RISC-V platform"
> >>> + depends on GENERIC_SCHED_CLOCK && RISCV_M_MODE
> >>> + default y
> >>> + select TIMER_PROBE
> >>> + select TIMER_OF
> >>> + help
> >>> + This option enables the CLINT timer for RISC-V systems. The CLINT
> >>> + driver is usually used for NoMMU RISC-V systems.
> >>
> >> For the timer, we do silent option and let the platform config select
> >> it. Please refer to other timer option below as reference.
> >
> > Okay, I will use "default RISCV" instead of "default y" (just like other
> > timer Kconfig options).
>
> Preferably, select it from the platform's Kconfig.

Okay, I will update.

>
> >>
> >>> config CSKY_MP_TIMER
> >>> bool "SMP Timer for the C-SKY platform" if COMPILE_TEST
> >>> depends on CSKY
> >>> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> >>> index bdda1a2e4097..18e700e703a0 100644
> >>> --- a/drivers/clocksource/Makefile
> >>> +++ b/drivers/clocksource/Makefile
> >>> @@ -87,6 +87,7 @@ obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o
> >>> obj-$(CONFIG_X86_NUMACHIP) += numachip.o
> >>> obj-$(CONFIG_ATCPIT100_TIMER) += timer-atcpit100.o
> >>> obj-$(CONFIG_RISCV_TIMER) += timer-riscv.o
> >>> +obj-$(CONFIG_CLINT_TIMER) += timer-clint.o
> >>> obj-$(CONFIG_CSKY_MP_TIMER) += timer-mp-csky.o
> >>> obj-$(CONFIG_GX6605S_TIMER) += timer-gx6605s.o
> >>> obj-$(CONFIG_HYPERV_TIMER) += hyperv_timer.o
> >>> diff --git a/drivers/clocksource/timer-clint.c b/drivers/clocksource/timer-clint.c
> >>> new file mode 100644
> >>> index 000000000000..bfc38bb5a589
> >>> --- /dev/null
> >>> +++ b/drivers/clocksource/timer-clint.c
> >>> @@ -0,0 +1,229 @@
> >>> +// SPDX-License-Identifier: GPL-2.0
> >>> +/*
> >>> + * Copyright (C) 2020 Western Digital Corporation or its affiliates.
> >>> + *
> >>> + * Most of the M-mode (i.e. NoMMU) RISC-V systems usually have a
> >>> + * CLINT MMIO timer device.
> >>> + */
> >>> +
> >>> +#define pr_fmt(fmt) "clint: " fmt
> >>> +#include <linux/bitops.h>
> >>> +#include <linux/clocksource.h>
> >>> +#include <linux/clockchips.h>
> >>> +#include <linux/cpu.h>
> >>> +#include <linux/delay.h>
> >>> +#include <linux/module.h>
> >>> +#include <linux/of_address.h>
> >>> +#include <linux/sched_clock.h>
> >>> +#include <linux/io-64-nonatomic-lo-hi.h>
> >>> +#include <linux/interrupt.h>
> >>> +#include <linux/of_irq.h>
> >>> +#include <linux/smp.h>
> >>> +
> >>> +#define CLINT_IPI_OFF 0
> >>> +#define CLINT_TIMER_CMP_OFF 0x4000
> >>> +#define CLINT_TIMER_VAL_OFF 0xbff8
> >>> +
> >>> +/* CLINT manages IPI and Timer for RISC-V M-mode */
> >>> +static u32 __iomem *clint_ipi_base;
> >>> +static u64 __iomem *clint_timer_cmp;
> >>> +static u64 __iomem *clint_timer_val;
> >>> +static unsigned long clint_timer_freq;
> >>> +static unsigned int clint_timer_irq;
> >>> +
> >>> +static void clint_send_ipi(const struct cpumask *target)
> >>> +{
> >>> + unsigned int cpu;
> >>> +
> >>> + for_each_cpu(cpu, target)
> >>> + writel(1, clint_ipi_base + cpuid_to_hartid_map(cpu));
> >>> +}
> >>> +
> >>> +static void clint_clear_ipi(void)
> >>> +{
> >>> + writel(0, clint_ipi_base + cpuid_to_hartid_map(smp_processor_id()));
> >>> +}
> >>> +
> >>> +static struct riscv_ipi_ops clint_ipi_ops = {
> >>> + .ipi_inject = clint_send_ipi,
> >>> + .ipi_clear = clint_clear_ipi,
> >>> +};
> >>> +
> >>> +#ifdef CONFIG_64BIT
> >>> +#define clint_get_cycles() readq_relaxed(clint_timer_val)
> >>> +#else
> >>> +#define clint_get_cycles() readl_relaxed(clint_timer_val)
> >>> +#define clint_get_cycles_hi() readl_relaxed(((u32 *)clint_timer_val) + 1)
> >>> +#endif
> >>> +
> >>> +#ifdef CONFIG_64BIT
> >>> +static u64 clint_get_cycles64(void)
> >>> +{
> >>> + return clint_get_cycles();
> >>> +}
> >>> +#else /* CONFIG_64BIT */
> >>> +static u64 clint_get_cycles64(void)
> >>> +{
> >>> + u32 hi, lo;
> >>> +
> >>> + do {
> >>> + hi = clint_get_cycles_hi();
> >>> + lo = clint_get_cycles();
> >>> + } while (hi != clint_get_cycles_hi());
> >>> +
> >>> + return ((u64)hi << 32) | lo;
> >>> +}
> >>> +#endif /* CONFIG_64BIT */
> >>> +static int clint_clock_next_event(unsigned long delta,
> >>> + struct clock_event_device *ce)
> >>> +{
> >>> + void __iomem *r = clint_timer_cmp +
> >>> + cpuid_to_hartid_map(smp_processor_id());
> >>> +
> >>> + csr_set(CSR_IE, IE_TIE);
> >>> + writeq_relaxed(clint_get_cycles64() + delta, r);
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static DEFINE_PER_CPU(struct clock_event_device, clint_clock_event) = {
> >>> + .name = "clint_clockevent",
> >>> + .features = CLOCK_EVT_FEAT_ONESHOT,
> >>> + .rating = 100,
> >>> + .set_next_event = clint_clock_next_event,
> >>> +};
> >>> +
> >>> +static u64 clint_rdtime(struct clocksource *cs)
> >>> +{
> >>> + return readq_relaxed(clint_timer_val);
> >>> +}
> >>> +
> >>> +static u64 notrace clint_sched_clock(void)
> >>> +{
> >>> + return readq_relaxed(clint_timer_val);
> >>> +}
> >>> +
> >>> +static struct clocksource clint_clocksource = {
> >>> + .name = "clint_clocksource",
> >>> + .rating = 300,
> >>> + .mask = CLOCKSOURCE_MASK(64),
> >>> + .flags = CLOCK_SOURCE_IS_CONTINUOUS,
> >>> + .read = clint_rdtime,
> >>
> >> What if !CONFIG_64BIT
> >
> > The CLINT counter is 64bit for both 32bit and 64bit systems
> > but I should have used clint_get_cycles64() in clint_rdtime().
> > I will update it.
> >
> >>
> >>> +};
> >>> +
> >>> +static int clint_timer_starting_cpu(unsigned int cpu)
> >>> +{
> >>> + struct clock_event_device *ce = per_cpu_ptr(&clint_clock_event, cpu);
> >>> +
> >>> + ce->cpumask = cpumask_of(cpu);
> >>> + clockevents_config_and_register(ce, clint_timer_freq, 200, ULONG_MAX);
> >>
> >> The function is not immune against registering the same clockevents. If
> >> the CPU is hotplugged several times, this function will be called again
> >> and again. Why not rely on a for_each_possible_cpu loop in the init
> >> function ?
> >>
> >>> + enable_percpu_irq(clint_timer_irq,
> >>> + irq_get_trigger_type(clint_timer_irq));
> >>
> >> Why do you want to enable / disable the interrrupts ? The should be
> >> already handle by the hotplug framework no ?
> >
> > The perCPU interrupts are not enabled by default. We have to
> > explicitly enable/disable perCPU interrupts in CPU hotplug callbacks.
> >
>
> Isn't is possible to do that in the probe/init function ?

The enable_percpu_irq() and disable_percpu_irq() work for current
CPU only. This means we have to call these functions separately on
each CPU.

>
>
>
> --
> <http://www.linaro.org/> Linaro.org â Open source software for ARM SoCs
>
> Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog

Next message: Bjorn Andersson: "Re: [PATCH v6 9/9] remoteproc: Properly handle firmware name when attaching"
Previous message: Stephen Rothwell: "linux-next: build failure after merge of the kvm tree"
In reply to: Daniel Lezcano: "Re: [PATCH v3 2/4] clocksource/drivers: Add CLINT timer driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]