Re: [PATCH v4 0/6] arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support

[Tero Kristo]

On 29/06/2020 15:52, Roger Quadros wrote:
> Hi Tero,
>
> This series adds SERDES PHY support and Type-C USB Super-Speed support
> to the J721E EVM.
>
> Please queue this for -next. Thanks.

Queued up for 5.9, thanks.

-Tero

> cheers,
> -roger
>
> Changelog:
> v4:
> - Removed redundant patch
> - used compaible string for yaml filename
> - typo fix s/mdf/mfd in patch subject
> - added simple-mfd, address-cells, size-cells and ranges
>
> v3:
> - Add new DT schema for J721E System controller.
> - Re-order system controller's compatible string i.e. most compatible to least.
>
> v2:
> - Addressed Rob's comments.
> - Changed type-C debounce delay from 300ms to 700ms as 300ms is not
> sufficient on EVM.
>
>
> Kishon Vijay Abraham I (2):
>    arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes
>    arm64: dts: ti: k3-j721e-main: Add system controller node and SERDES
>      lane mux
>
> Roger Quadros (4):
>    dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system
>      controller
>    arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX
>    arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0
>    arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR
>      line
>
>   .../mfd/ti,j721e-system-controller.yaml       |  74 +++++
>   .../dts/ti/k3-j721e-common-proc-board.dts     |  33 ++-
>   arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 275 ++++++++++++++++++
>   include/dt-bindings/mux/mux-j721e-wiz.h       |  53 ++++
>   4 files changed, 433 insertions(+), 2 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
>   create mode 100644 include/dt-bindings/mux/mux-j721e-wiz.h

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki