Re: [PATCH v5 06/15] iommu/vt-d: Support setting ioasid set to domain

[Auger Eric]

Yi,

On 7/12/20 1:21 PM, Liu Yi L wrote:
> From IOMMU p.o.v., PASIDs allocated and managed by external components
> (e.g. VFIO) will be passed in for gpasid_bind/unbind operation. IOMMU
> needs some knowledge to check the PASID ownership, hence add an interface
> for those components to tell the PASID owner.
> 
> In latest kernel design, PASID ownership is managed by IOASID set where
> the PASID is allocated from. This patch adds support for setting ioasid
> set ID to the domains used for nesting/vSVA. Subsequent SVA operations
> on the PASID will be checked against its IOASID set for proper ownership.
Subsequent SVA operations will check the PASID against its IOASID set
for proper ownership.
> 
> Cc: Kevin Tian <kevin.tian@xxxxxxxxx>
> CC: Jacob Pan <jacob.jun.pan@xxxxxxxxxxxxxxx>
> Cc: Alex Williamson <alex.williamson@xxxxxxxxxx>
> Cc: Eric Auger <eric.auger@xxxxxxxxxx>
> Cc: Jean-Philippe Brucker <jean-philippe@xxxxxxxxxx>
> Cc: Joerg Roedel <joro@xxxxxxxxxx>
> Cc: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>
> Signed-off-by: Liu Yi L <yi.l.liu@xxxxxxxxx>
> Signed-off-by: Jacob Pan <jacob.jun.pan@xxxxxxxxxxxxxxx>
> ---
> v4 -> v5:
> *) address comments from Eric Auger.
> ---
>  drivers/iommu/intel/iommu.c | 22 ++++++++++++++++++++++
>  include/linux/intel-iommu.h |  4 ++++
>  include/linux/iommu.h       |  1 +
>  3 files changed, 27 insertions(+)
> 
> diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
> index 72ae6a2..4d54198 100644
> --- a/drivers/iommu/intel/iommu.c
> +++ b/drivers/iommu/intel/iommu.c
> @@ -1793,6 +1793,7 @@ static struct dmar_domain *alloc_domain(int flags)
>  	if (first_level_by_default())
>  		domain->flags |= DOMAIN_FLAG_USE_FIRST_LEVEL;
>  	domain->has_iotlb_device = false;
> +	domain->ioasid_sid = INVALID_IOASID_SET;
>  	INIT_LIST_HEAD(&domain->devices);
>  
>  	return domain;
> @@ -6039,6 +6040,27 @@ intel_iommu_domain_set_attr(struct iommu_domain *domain,
>  		}
>  		spin_unlock_irqrestore(&device_domain_lock, flags);
>  		break;
> +	case DOMAIN_ATTR_IOASID_SID:
> +	{
> +		int sid = *(int *)data;
> +
> +		if (!(dmar_domain->flags & DOMAIN_FLAG_NESTING_MODE)) {
> +			ret = -ENODEV;
> +			break;
> +		}
> +		spin_lock_irqsave(&device_domain_lock, flags);
I think the lock should be taken before the DOMAIN_FLAG_NESTING_MODE
check. Otherwise, the flags can be theretically changed inbetween the
check and the test below?

Thanks

Eric
> +		if (dmar_domain->ioasid_sid != INVALID_IOASID_SET &&
> +		    dmar_domain->ioasid_sid != sid) {
> +			pr_warn_ratelimited("multi ioasid_set (%d:%d) setting",
> +					    dmar_domain->ioasid_sid, sid);
> +			ret = -EBUSY;
> +			spin_unlock_irqrestore(&device_domain_lock, flags);
> +			break;
> +		}
> +		dmar_domain->ioasid_sid = sid;
> +		spin_unlock_irqrestore(&device_domain_lock, flags);
> +		break;
> +	}
>  	default:
>  		ret = -EINVAL;
>  		break;
> diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
> index 3f23c26..0d0ab32 100644
> --- a/include/linux/intel-iommu.h
> +++ b/include/linux/intel-iommu.h
> @@ -549,6 +549,10 @@ struct dmar_domain {
>  					   2 == 1GiB, 3 == 512GiB, 4 == 1TiB */
>  	u64		max_addr;	/* maximum mapped address */
>  
> +	int		ioasid_sid;	/*
> +					 * the ioasid set which tracks all
> +					 * PASIDs used by the domain.
> +					 */
>  	int		default_pasid;	/*
>  					 * The default pasid used for non-SVM
>  					 * traffic on mediated devices.
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index 7ca9d48..e84a1d5 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -124,6 +124,7 @@ enum iommu_attr {
>  	DOMAIN_ATTR_FSL_PAMUV1,
>  	DOMAIN_ATTR_NESTING,	/* two stages of translation */
>  	DOMAIN_ATTR_DMA_USE_FLUSH_QUEUE,
> +	DOMAIN_ATTR_IOASID_SID,
>  	DOMAIN_ATTR_MAX,
>  };
>  
>