[PATCH for v5.9] hwmon: (ina2xx) Replace HTTP links with HTTPS ones

From: Alexander A. Klimov
Date: Sun Jul 19 2020 - 14:15:42 EST


Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@xxxxxxxxxxxx>
---
Continuing my work started at 93431e0607e5.
See also: git log --oneline '--author=Alexander A. Klimov <grandmaster@xxxxxxxxxxxx>' v5.7..master
(Actually letting a shell for loop submit all this stuff for me.)

If there are any URLs to be removed completely
or at least not (just) HTTPSified:
Just clearly say so and I'll *undo my change*.
See also: https://lkml.org/lkml/2020/6/27/64

If there are any valid, but yet not changed URLs:
See: https://lkml.org/lkml/2020/6/26/837

If you apply the patch, please let me know.

Sorry again to all maintainers who complained about subject lines.
Now I realized that you want an actually perfect prefixes,
not just subsystem ones.
I tried my best...
And yes, *I could* (at least half-)automate it.
Impossible is nothing! :)


Documentation/hwmon/ina2xx.rst | 10 +++++-----
drivers/hwmon/ina2xx.c | 10 +++++-----
2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/Documentation/hwmon/ina2xx.rst b/Documentation/hwmon/ina2xx.rst
index ed81f5416331..f78a5cd44c4c 100644
--- a/Documentation/hwmon/ina2xx.rst
+++ b/Documentation/hwmon/ina2xx.rst
@@ -11,7 +11,7 @@ Supported chips:

Datasheet: Publicly available at the Texas Instruments website

- http://www.ti.com/
+ https://www.ti.com/

* Texas Instruments INA220

@@ -21,7 +21,7 @@ Supported chips:

Datasheet: Publicly available at the Texas Instruments website

- http://www.ti.com/
+ https://www.ti.com/

* Texas Instruments INA226

@@ -31,7 +31,7 @@ Supported chips:

Datasheet: Publicly available at the Texas Instruments website

- http://www.ti.com/
+ https://www.ti.com/

* Texas Instruments INA230

@@ -41,7 +41,7 @@ Supported chips:

Datasheet: Publicly available at the Texas Instruments website

- http://www.ti.com/
+ https://www.ti.com/

* Texas Instruments INA231

@@ -51,7 +51,7 @@ Supported chips:

Datasheet: Publicly available at the Texas Instruments website

- http://www.ti.com/
+ https://www.ti.com/

Author: Lothar Felten <lothar.felten@xxxxxxxxx>

diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index 55d474ec7c35..0fc6d5857993 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -4,19 +4,19 @@
*
* INA219:
* Zero Drift Bi-Directional Current/Power Monitor with I2C Interface
- * Datasheet: http://www.ti.com/product/ina219
+ * Datasheet: https://www.ti.com/product/ina219
*
* INA220:
* Bi-Directional Current/Power Monitor with I2C Interface
- * Datasheet: http://www.ti.com/product/ina220
+ * Datasheet: https://www.ti.com/product/ina220
*
* INA226:
* Bi-Directional Current/Power Monitor with I2C Interface
- * Datasheet: http://www.ti.com/product/ina226
+ * Datasheet: https://www.ti.com/product/ina226
*
* INA230:
* Bi-directional Current/Power Monitor with I2C Interface
- * Datasheet: http://www.ti.com/product/ina230
+ * Datasheet: https://www.ti.com/product/ina230
*
* Copyright (C) 2012 Lothar Felten <lothar.felten@xxxxxxxxx>
* Thanks to Jan Volkering
@@ -148,7 +148,7 @@ static const struct ina2xx_config ina2xx_config[] = {
* Available averaging rates for ina226. The indices correspond with
* the bit values expected by the chip (according to the ina226 datasheet,
* table 3 AVG bit settings, found at
- * http://www.ti.com/lit/ds/symlink/ina226.pdf.
+ * https://www.ti.com/lit/ds/symlink/ina226.pdf.
*/
static const int ina226_avg_tab[] = { 1, 4, 16, 64, 128, 256, 512, 1024 };

--
2.27.0