Re: [PATCH v4 14/16] arm64: allwinner: A100: add the basical Allwinner A100 DTSI file

[Maxime Ripard]

Hi,

On Tue, Jul 14, 2020 at 03:20:29PM +0800, Frank Lee wrote:
> From: Yangtao Li <frank@xxxxxxxxxxxxxxxxx>
> 
> Allwinner A100 is a new SoC with Cortex-A53 cores, this commit adds
> the basical DTSI file of it, including the clock, i2c, pins, sid, ths,
> nmi, and UART support.
> 
> Signed-off-by: Yangtao Li <frank@xxxxxxxxxxxxxxxxx>
> ---
>  .../arm64/boot/dts/allwinner/sun50i-a100.dtsi | 364 ++++++++++++++++++
>  1 file changed, 364 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> new file mode 100644
> index 000000000000..3fb2443f2121
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> @@ -0,0 +1,364 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +/*
> + * Copyright (c) 2020 Yangtao Li <frank@xxxxxxxxxxxxxxxxx>
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/sun50i-a100-ccu.h>
> +#include <dt-bindings/clock/sun50i-a100-r-ccu.h>
> +#include <dt-bindings/reset/sun50i-a100-ccu.h>
> +#include <dt-bindings/reset/sun50i-a100-r-ccu.h>
> +
> +/ {
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu0: cpu@0 {
> +			compatible = "arm,armv8";

You should use the arm,cortex-a53 compatible here, arm,armv8 is for
software models.

> +		sid@3006000 {

The node name is supposed to be the class of the device, and the DT spec
defines a list of them already. eeprom would be better suited here.

> +	thermal-zones {
> +		cpu-thermal-zone {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&ths 0>;
> +		};
> +
> +		gpu-thermal-zone {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&ths 1>;
> +		};
> +
> +		ddr-thermal-zone {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&ths 2>;
> +		};
> +	};

Ideally, the nodes here should be ordered by alphabetical order (so ddr
before GPU).

Thanks!
Maxime