arm: dts: allwinner: a20: Add Drejo DS167 initial support

From: stulluk
Date: Sun Aug 02 2020 - 16:29:32 EST

From: Sertac TULLUK <stulluk@xxxxxxxxx>

Drejo DS167 is an Allwinner A20 based IoT device, which support

- Allwinner A20 Cortex-A7
- Mali-400MP2 GPU
- AXP209 PMIC
- 1GB DDR3 RAM
- 8GB eMMC
- 10/100M Ethernet
- SATA
- HDMI
- 10.1inch and 7.0inch LVDS LCD and Touch screens
- CSI: OV5640 sensor
- USB OTG
- 2x USB2.0
- builtin KNX Transceiver
- 3x Dry Contact Input
- 3x Relay output
- IR
- UART3
- SPI1
- RTC Battery
- 8x GPIO
- Analogue + Digital Microphone
- PAM8620 speaker Amplifier
- 12V DC power supply
- 3.7V Battery Operable

Signed-off-by: Sertac TULLUK <stulluk@xxxxxxxxx>
---
arch/arm/boot/dts/Makefile | 2 +
.../boot/dts/sun7i-a20-drejo-ds167-emmc.dts | 69 ++++
arch/arm/boot/dts/sun7i-a20-drejo-ds167.dts | 361 ++++++++++++++++++
3 files changed, 432 insertions(+)
create mode 100644 arch/arm/boot/dts/sun7i-a20-drejo-ds167-emmc.dts
create mode 100644 arch/arm/boot/dts/sun7i-a20-drejo-ds167.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 3823090d0..574305522 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1115,6 +1115,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-olinuxino-lime2-emmc.dtb \
sun7i-a20-olinuxino-micro.dtb \
sun7i-a20-olinuxino-micro-emmc.dtb \
+ sun7i-a20-drejo-ds167.dtb \
+ sun7i-a20-drejo-ds167-emmc.dtb \
sun7i-a20-orangepi.dtb \
sun7i-a20-orangepi-mini.dtb \
sun7i-a20-pcduino3.dtb \
diff --git a/arch/arm/boot/dts/sun7i-a20-drejo-ds167-emmc.dts b/arch/arm/boot/dts/sun7i-a20-drejo-ds167-emmc.dts
new file mode 100644
index 000000000..b6147eb01
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-drejo-ds167-emmc.dts
@@ -0,0 +1,69 @@
+/*
+ * Copyright 2020 Sertac TULLUK
+ *
+ * Sertac TULLUK <stulluk@xxxxxxxxx>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun7i-a20-drejo-ds167.dts"
+
+/ {
+ model = "drejo DS167-eMMC";
+ compatible = "drejo,sun7i-a20-drejo-ds167-emmc", "allwinner,sun7i-a20";
+
+ mmc2_pwrseq: pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&pio 2 24 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&mmc2 {
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <4>;
+ non-removable;
+ mmc-pwrseq = <&mmc2_pwrseq>;
+ status = "okay";
+
+ emmc: emmc@0 {
+ reg = <0>;
+ compatible = "mmc-card";
+ broken-hpi;
+ };
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-drejo-ds167.dts b/arch/arm/boot/dts/sun7i-a20-drejo-ds167.dts
new file mode 100644
index 000000000..1103a6082
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-drejo-ds167.dts
@@ -0,0 +1,361 @@
+/*
+ * Copyright 2020 Sertac TULLUK
+ *
+ * Sertac TULLUK <stulluk@xxxxxxxxx>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "drejo DS167";
+ compatible = "drejo,sun7i-a20-drejo-ds167", "allwinner,sun7i-a20";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart3;
+
+ spi0 = &spi1;
+ spi1 = &spi2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
+ default-brightness-level = <9>;
+ };
+
+ panel {
+ compatible = "drejo,ds167-10inch-panel", "panel-lvds";
+ backlight = <&backlight>;
+
+ width-mm = <220>;
+ height-mm = <132>;
+ data-mapping = "vesa-24";
+
+ panel-timing {
+ /* 1280x800 @60Hz */
+ clock-frequency = <69000000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hsync-len = <1>; /* hs */
+ hfront-porch = <118>; /* ri */
+ hback-porch = <19>; /* le */
+ vfront-porch = <6>; /* lo */
+ vback-porch = <9>; /* up */
+ vsync-len = <1>; /* vs */
+ };
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&tcon0_out_lcd>;
+ };
+ };
+ };
+
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_ds167>;
+
+ red {
+ label = "ds167-status";
+ gpios = <&pio 8 9 GPIO_ACTIVE_LOW>; /* PI9 STATUS LED NEAR A20 */
+ default-state = "on";
+ };
+ };
+};
+
+&ahci {
+ target-supply = <&reg_ahci_5v>;
+ status = "okay";
+};
+
+&codec {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
+ phy-handle = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+};
+
+&mali {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+
+&i2c2 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ polytouch: edt-ft5x06@38 {
+ compatible = "edt,edt-ft5406", "edt,edt-ft5x06";
+ reg = <0x38>;
+ interrupt-parent = <&pio>;
+ interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* PH21 */
+ wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */
+ touchscreen-size-x = <1200>;
+ touchscreen-size-y = <800>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+
+&lradc {
+ vref-supply = <&reg_vcc3v0>;
+ status = "okay";
+};
+
+&gmac_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ gmac_txerr: gmac-txerr-pin {
+ pins = "PA17";
+ function = "gmac";
+ };
+
+ led_pins_ds167: led-pins {
+ pins = "PI9"; /* Status led, on schematic, this is LED_EN */
+ function = "gpio_out";
+ drive-strength = <20>;
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>, <&pwm1_pin>;
+ status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+&reg_ahci_5v {
+ status = "okay";
+};
+
+&reg_usb0_vbus {
+ status = "okay";
+};
+
+&reg_usb1_vbus {
+ status = "okay";
+};
+
+&reg_usb2_vbus {
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pi_pins>,
+ <&spi1_cs0_pi_pin>;
+ status = "okay";
+};
+
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pc_pins>,
+ <&spi2_cs0_pc_pin>;
+ status = "okay";
+};
+
+&tcon0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_lvds0_pins>;
+};
+
+&tcon0_out {
+ tcon0_out_lcd: endpoint {
+ remote-endpoint = <&panel_input>;
+ };
+};
+
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pg_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+ usb0_vbus-supply = <&reg_usb0_vbus>;
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
+ status = "okay";
+};
--
2.17.1