[PATCH] arm64: dts: meson: vim3: correct led polarity

[Jerome Brunet]

The LEDs on the vim3 are active when the gpio is high, not low.

Fixes: c6d29c66e582 ("arm64: dts: meson-g12b-khadas-vim3: add initial device-tree")
Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
---
 arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 4510a63b0006..9e2995dc144b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -70,13 +70,13 @@ leds {
 
 		led-white {
 			label = "vim3:white:sys";
-			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		led-red {
 			label = "vim3:red";
-			gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
-- 
2.25.4