Re: [PATCH 4/9] drm/msm/dsi: Add phy configuration for SDM630/636/660

[Rob Clark]

On Mon, Aug 3, 2020 at 4:00 AM Vinod Koul <vkoul@xxxxxxxxxx> wrote:
>
> On 26-07-20, 13:12, Konrad Dybcio wrote:
> > These SoCs make use of the 14nm phy, but at different
> > addresses than other 14nm units.
> >
> > Signed-off-by: Konrad Dybcio <konradybcio@xxxxxxxxx>
> > ---
> >  .../devicetree/bindings/display/msm/dsi.txt    |  1 +
> >  drivers/gpu/drm/msm/dsi/phy/dsi_phy.c          |  2 ++
> >  drivers/gpu/drm/msm/dsi/phy/dsi_phy.h          |  1 +
> >  drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c     | 18 ++++++++++++++++++
>
> Is there a reason why dsi phy needs to be here and not in phy subsystem
> drivers/phy/ ?

*maybe* it would be possible to split out all of the dsi (and hdmi)
phy to drivers/phy.  But splitting out just the new ones wouldn't be
practical (it would duplicate a lot of code, and make the rest of the
dsi code have to deal with both cases).  And unlike dp/usb-c I'm not
really sure I see an advantage to justify the churn.

BR,
-R

>
> >  4 files changed, 22 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
> > index af95586c898f..7884fd7a85c1 100644
> > --- a/Documentation/devicetree/bindings/display/msm/dsi.txt
> > +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
> > @@ -87,6 +87,7 @@ Required properties:
> >    * "qcom,dsi-phy-20nm"
> >    * "qcom,dsi-phy-28nm-8960"
> >    * "qcom,dsi-phy-14nm"
> > +  * "qcom,dsi-phy-14nm-660"
> >    * "qcom,dsi-phy-10nm"
> >    * "qcom,dsi-phy-10nm-8998"
> >  - reg: Physical base address and length of the registers of PLL, PHY. Some
> > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
> > index f509ebd77500..009f5b843dd1 100644
> > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
> > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
> > @@ -499,6 +499,8 @@ static const struct of_device_id dsi_phy_dt_match[] = {
> >  #ifdef CONFIG_DRM_MSM_DSI_14NM_PHY
> >       { .compatible = "qcom,dsi-phy-14nm",
> >         .data = &dsi_phy_14nm_cfgs },
> > +     { .compatible = "qcom,dsi-phy-14nm-660",
> > +       .data = &dsi_phy_14nm_660_cfgs },
> >  #endif
> >  #ifdef CONFIG_DRM_MSM_DSI_10NM_PHY
> >       { .compatible = "qcom,dsi-phy-10nm",
> > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> > index 24b294ed3059..ef8672d7b123 100644
> > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> > @@ -45,6 +45,7 @@ extern const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs;
> >  extern const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs;
> >  extern const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs;
> >  extern const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs;
> > +extern const struct msm_dsi_phy_cfg dsi_phy_14nm_660_cfgs;
> >  extern const struct msm_dsi_phy_cfg dsi_phy_10nm_cfgs;
> >  extern const struct msm_dsi_phy_cfg dsi_phy_10nm_8998_cfgs;
> >
> > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> > index 1594f1422372..519400501bcd 100644
> > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> > @@ -161,3 +161,21 @@ const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs = {
> >       .io_start = { 0x994400, 0x996400 },
> >       .num_dsi_phy = 2,
> >  };
> > +
> > +const struct msm_dsi_phy_cfg dsi_phy_14nm_660_cfgs = {
> > +     .type = MSM_DSI_PHY_14NM,
> > +     .src_pll_truthtable = { {false, false}, {true, false} },
> > +     .reg_cfg = {
> > +             .num = 1,
> > +             .regs = {
> > +                     {"vcca", 17000, 32},
> > +             },
> > +     },
> > +     .ops = {
> > +             .enable = dsi_14nm_phy_enable,
> > +             .disable = dsi_14nm_phy_disable,
> > +             .init = dsi_14nm_phy_init,
> > +     },
> > +     .io_start = { 0xc994400, 0xc996000 },
> > +     .num_dsi_phy = 2,
> > +};
> > --
> > 2.27.0
>
> --
> ~Vinod