Re: [PATCH v4 12/12] dt-bindings: sound: lpass-cpu: Move to yaml format
From: Rob Herring
Date: Mon Aug 03 2020 - 14:22:41 EST
On Mon, Aug 3, 2020 at 2:28 AM Rohit Kumar <rohitkr@xxxxxxxxxxxxxx> wrote:
>
> Thanks Rob for reviewing
>
> On 7/23/2020 10:46 PM, Rob Herring wrote:
> > On Wed, Jul 22, 2020 at 04:01:55PM +0530, Rohit kumar wrote:
> >> Update lpass-cpu binding with yaml formats.
> >>
> >> Signed-off-by: Rohit kumar <rohitkr@xxxxxxxxxxxxxx>
> >> ---
> >> .../devicetree/bindings/sound/qcom,lpass-cpu.txt | 130 ---------------
> >> .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 185 +++++++++++++++++++++
> >> 2 files changed, 185 insertions(+), 130 deletions(-)
> >> delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
> >> create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
> >>
> >> diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
> >> deleted file mode 100644
> >> index c21392e..00000000
> >> --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
> >> +++ /dev/null
> >> @@ -1,130 +0,0 @@
> >> -* Qualcomm Technologies LPASS CPU DAI
> >> -
> >> -This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS).
> >> -
> >> -Required properties:
> >> -
> >> -- compatible : "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" or
> >> - "qcom,lpass-cpu-sc7180"
> >> -- clocks : Must contain an entry for each entry in clock-names.
> >> -- clock-names : A list which must include the following entries:
> >> - * "ahbix-clk"
> >> - * "mi2s-osr-clk"
> >> - * "mi2s-bit-clk"
> >> - : required clocks for "qcom,lpass-cpu-apq8016"
> >> - * "ahbix-clk"
> >> - * "mi2s-bit-clk0"
> >> - * "mi2s-bit-clk1"
> >> - * "mi2s-bit-clk2"
> >> - * "mi2s-bit-clk3"
> >> - * "pcnoc-mport-clk"
> >> - * "pcnoc-sway-clk"
> >> - : required clocks for "qcom,lpass-cpu-sc7180"
> >> - * "audio-core"
> >> - * "mclk0"
> >> - * "mi2s-bit-clk0"
> >> - * "mi2s-bit-clk1"
> >> - * "pcnoc-sway-clk"
> >> - * "pcnoc-mport-clk"
> >> -
> >> -- interrupts : Must contain an entry for each entry in
> >> - interrupt-names.
> >> -- interrupt-names : A list which must include the following entries:
> >> - * "lpass-irq-lpaif"
> >> -- pinctrl-N : One property must exist for each entry in
> >> - pinctrl-names. See ../pinctrl/pinctrl-bindings.txt
> >> - for details of the property values.
> >> -- pinctrl-names : Must contain a "default" entry.
> >> -- reg : Must contain an address for each entry in reg-names.
> >> -- reg-names : A list which must include the following entries:
> >> - * "lpass-lpaif"
> >> -- #address-cells : Must be 1
> >> -- #size-cells : Must be 0
> >> -
> >> -
> >> -
> >> -Optional properties:
> >> -
> >> -- qcom,adsp : Phandle for the audio DSP node
> >> -
> >> -By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels.
> >> -The SD lines to use can be configured by adding subnodes for each of the DAIs.
> >> -
> >> -Required properties for each DAI (represented by a subnode):
> >> -- reg : Must be one of the DAI IDs
> >> - (usually part of dt-bindings header)
> >> -- qcom,playback-sd-lines: List of serial data lines to use for playback
> >> - Each SD line should be represented by a number from 0-3.
> >> -- qcom,capture-sd-lines : List of serial data lines to use for capture
> >> - Each SD line should be represented by a number from 0-3.
> >> -
> >> -Note that adding a subnode changes the default to "no lines configured",
> >> -so both playback and capture lines should be configured when a subnode is added.
> >> -
> >> -Examples:
> >> -1)
> >> -
> >> -lpass@28100000 {
> >> - compatible = "qcom,lpass-cpu";
> >> - clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>;
> >> - clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk";
> >> - interrupts = <0 85 1>;
> >> - interrupt-names = "lpass-irq-lpaif";
> >> - pinctrl-names = "default", "idle";
> >> - pinctrl-0 = <&mi2s_default>;
> >> - pinctrl-1 = <&mi2s_idle>;
> >> - reg = <0x28100000 0x10000>;
> >> - reg-names = "lpass-lpaif";
> >> - qcom,adsp = <&adsp>;
> >> -
> >> - #address-cells = <1>;
> >> - #size-cells = <0>;
> >> -
> >> - /* Optional to set different MI2S SD lines */
> >> - dai@3 {
> >> - reg = <MI2S_QUATERNARY>;
> >> - qcom,playback-sd-lines = <0 1>;
> >> - };
> >> -};
> >> -
> >> -2)
> >> -
> >> -#include <dt-bindings/sound/sc7180-lpass.h>
> >> -
> >> -lpass_cpu: lpass {
> >> - compatible = "qcom,lpass-cpu-sc7180";
> >> -
> >> - reg = <0 0x62F00000 0 0x29000>;
> >> -
> >> - iommus = <&apps_smmu 0x1020 0>;
> >> -
> >> - power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
> >> - clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
> >> - <&lpasscorecc LPASS_AUDIO_CORE_CORE_CLK>,
> >> - <&lpasscorecc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>,
> >> - <&lpasscorecc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>,
> >> - <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>,
> >> - <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>;
> >> - clock-names = "pcnoc-sway-clk", "audio-core",
> >> - "mclk0", "pcnoc-mport-clk",
> >> - "mi2s-bit-clk0", "mi2s-bit-clk1";
> >> - interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>;
> >> - interrupt-names = "lpass-irq-lpaif";
> >> -
> >> -
> >> - #sound-dai-cells = <1>;
> >> -
> >> - #address-cells = <1>;
> >> - #size-cells = <0>;
> >> -
> >> - mi2s-primary@0 {
> >> - reg = <MI2S_PRIMARY>;
> >> - qcom,playback-sd-lines = <1>;
> >> - qcom,capture-sd-lines = <0>;
> >> - };
> >> -
> >> - mi2s-secondary@1 {
> >> - reg = <MI2S_SECONDARY>;
> >> - qcom,playback-sd-lines = <0>;
> >> - };
> >> -};
> >> diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
> >> new file mode 100644
> >> index 00000000..03c598f
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
> >> @@ -0,0 +1,185 @@
> >> +# SPDX-License-Identifier: GPL-2.0-only
> > If all the authors are QCom or Linaro please dual license.
> Ok
> >> +%YAML 1.2
> >> +---
> >> +$id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml#
> >> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >> +
> >> +title: Qualcomm LPASS CPU dai driver bindings
> >> +
> >> +maintainers:
> >> + - Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> >> + - Rohit kumar <rohitkr@xxxxxxxxxxxxxx>
> >> +
> >> +description: |
> >> + Qualcomm SOC Low-Power Audio SubSystem (LPASS) that consist of MI2S interface
> >> + for audio data transfer on external codecs. LPASS cpu driver is a module to
> >> + configure Low-Power Audio Interface(LPAIF) core registers across different
> >> + IP versions.
> >> +
> >> +properties:
> >> + compatible:
> >> + oneOf:
> >> + - const: qcom,lpass-cpu
> >> + description: For IPQ806x
> >> +
> >> + - const: qcom,apq8016-lpass-cpu
> >> + description: For APQ8016
> >> +
> >> + - const: qcom,lpass-cpu-sc7180
> >> + description: For SC7180
> > Use enum rather than oneOf+const
> Sure
> >> +
> >> + reg:
> >> + maxItems: 1
> >> + description: LPAIF core registers
> >> +
> >> + clocks:
> >> + minItems: 3
> >> + maxItems: 6
> >> +
> >> + clock-names:
> >> + minItems: 3
> >> + maxItems: 6
> >> +
> >> + interrupts:
> >> + maxItems: 1
> >> + description: LPAIF DMA buffer interrupt
> >> +
> >> + qcom,adsp:
> >> + $ref: /schemas/types.yaml#/definitions/phandle
> >> + description: Phandle for the audio DSP node
> >> +
> >> + iommus:
> >> + maxItems: 1
> >> + description: Phandle to apps_smmu node with sid mask
> >> +
> >> + power-domains:
> >> + maxItems: 1
> >> +
> >> + '#sound-dai-cells':
> >> + const: 1
> >> +
> >> +patternProperties:
> >> + "(^mi2s-[0-9a-f]$|mi2s)":
> >> + type: object
> >> + description: Required properties for each DAI
> >> +
> >> + properties:
> >> + reg:
> >> + maxItems: 1
> >> + description: Must be one of the DAI ID
> >> +
> >> + required:
> >> + - reg
> >> +
> >> +
> > Extra blank line.
> Ok
> >> +required:
> >> + - compatible
> >> + - reg
> >> + - clocks
> >> + - clock-names
> >> + - interrupts
> >> + - '#sound-dai-cells'
> > Add:
> >
> > additionalProperties: false
>
> If I am adding this, I am getting below error:
>
> Documentation/devicetree/bindings/sound/qcom,lpass-cpu.example.dt.yaml:
> lpass@62f00000: '#address-cells', '#size-cells' do not match any of the
> regexes: '(^mi2s-[0-9a-f]$|mi2s)', 'pinctrl-[0-9]+'
>
>
> I think this is coming because we have not mentioned mi2s-primary@0 in
> required fields.
> The field name is variable based on the interface to which peripheral is
> connected to.
> It can be either of primary/secondary/tertiary/quaternary. Can you
> please suggest how to
> avoid this error?
No, the error is because you didn't list '#address-cells' and
'#size-cells' as properties.
Rob