Re: [PATCH v3 01/15] dt-bindings: iio: Add bindings for sx9310 sensor

[Stephen Boyd]

Quoting Jonathan Cameron (2020-08-01 08:06:39)
> On Fri, 31 Jul 2020 10:48:38 -0600
> Daniel Campello <campello@xxxxxxxxxxxx> wrote:
> > diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
> > new file mode 100644
> > index 00000000000000..5739074d3592fe
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
> > @@ -0,0 +1,65 @@
[...]
> > +
> > +  "#io-channel-cells":
> > +    const: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - "#io-channel-cells"
> 
> Missed this in earlier review (only noticed when I saw whilst santity
> checking earlier versions.
> 
> Fairly sure we should only need #io-channel-cells if we have
> a consumer of a channel somewhere else in DT.  So it's not
> required as far as I can see.
> 

This is mostly a decision for Rob to make, but I would make it required
because the device is always an io channel provider. It may be that it
isn't providing anything in the DT to something else in the DT but it is
providing this information somewhere so always having to spell that out
is simple and doesn't hurt.