RE: [EXT] Re: [PATCH v4 2/2] net: dsa: ocelot: Add support for QinQ Operation

[Hongbo Wang]

> > +     if (vlan->proto == ETH_P_8021AD) {
> > +             ocelot->enable_qinq = true;
> > +             ocelot_port->qinq_mode = true;
> > +     }
>  ...
> > +     if (vlan->proto == ETH_P_8021AD) {
> > +             ocelot->enable_qinq = false;
> > +             ocelot_port->qinq_mode = false;
> > +     }
> > +
> 
> I don't understand how this can work just by using a boolean to track the
> state.
> 
> This won't work properly if you are handling multiple QinQ VLAN entries.
> 
> Also, I need Andrew and Florian to review and ACK the DSA layer changes that
> add the protocol value to the device notifier block.

Hi David,
Thanks for reply.

When setting bridge's VLAN protocol to 802.1AD by the command "ip link set br0 type bridge vlan_protocol 802.1ad", it will call dsa_slave_vlan_rx_add(dev, proto, vid) for every port in the bridge, the parameter vid is port's pvid 1,
if pvid's proto is 802.1AD, I will enable switch's enable_qinq, and the related port's qinq_mode,

When there are multiple QinQ VLAN entries, If one VLAN's proto is 802.1AD, I will enable switch and the related port into QinQ mode.

Thanks,
hongbo