[PATCH 0/4] i2c: core: add generic GPIO bus recovery

[Codrin Ciubotariu]

GPIO recovery has been added already for some I2C bus drivers, such as
imx, pxa and at91. These drivers use similar bindings and have more or
less the same code for recovery. For this reason, we aim to move the
GPIO bus recovery implementation to the I2C core so that other drivers
can benefit from it, with small modifications.
This implementation initializes the pinctrl states and the SDA/SCL
GPIOs based on common bindings. The I2C bus drivers can still use
different bindings or other particular recovery steps if needed.
The ugly part with this patch series is the handle of PROBE_DEFER
which could be returned by devm_gpiod_get(). This changes things a
little for i2c_register_adapter() and for this reason this step is
implemented in a sperate patch.
The at91 Microchip driver is the first to use this implementation,
with an AI to move the rest of the drivers in the following steps.

This patch series was previously sent as a RFC. Significant changes
since RFC:
- "recovery" pinctrl state marked as deprecared in bindings;
- move to "gpio" pinctrl state done after the call to prepare_recovery()
  callback;
- glitch protection when SDA gpio is taken at initialization;

Codrin Ciubotariu (4):
  dt-binding: i2c: add generic properties for GPIO bus recovery
  i2c: core: add generic I2C GPIO recovery
  i2c: core: treat EPROBE_DEFER when acquiring SCL/SDA GPIOs
  i2c: at91: Move to generic GPIO bus recovery

 Documentation/devicetree/bindings/i2c/i2c.txt |  10 ++
 drivers/i2c/busses/i2c-at91-master.c          |  69 +-------
 drivers/i2c/busses/i2c-at91.h                 |   3 -
 drivers/i2c/i2c-core-base.c                   | 150 ++++++++++++++++--
 include/linux/i2c.h                           |  11 ++
 5 files changed, 163 insertions(+), 80 deletions(-)

-- 
2.25.1