[PATCH] wan: wanxl: switch from 'pci_' to 'dma_' API
From: Christophe JAILLET
Date: Tue Aug 04 2020 - 16:08:22 EST
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.
When memory is allocated in 'wanxl_pci_init_one()', GFP_KERNEL can be used
because it is a probe function and no lock is acquired.
Moreover, just a few lines above, GFP_KERNEL is already used.
@@
@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@
@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@
@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
@@
- PCI_DMA_NONE
+ DMA_NONE
@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
---
If needed, see post from Christoph Hellwig on the kernel-janitors ML:
https://marc.info/?l=kernel-janitors&m=158745678307186&w=4
---
drivers/net/wan/wanxl.c | 54 ++++++++++++++++++++---------------------
1 file changed, 27 insertions(+), 27 deletions(-)
diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
index 499f7cd19a4a..dc0cc953c4af 100644
--- a/drivers/net/wan/wanxl.c
+++ b/drivers/net/wan/wanxl.c
@@ -99,7 +99,7 @@ static inline port_status_t *get_status(struct port *port)
static inline dma_addr_t pci_map_single_debug(struct pci_dev *pdev, void *ptr,
size_t size, int direction)
{
- dma_addr_t addr = pci_map_single(pdev, ptr, size, direction);
+ dma_addr_t addr = dma_map_single(&pdev->dev, ptr, size, direction);
if (addr + size > 0x100000000LL)
pr_crit("%s: pci_map_single() returned memory at 0x%llx!\n",
pci_name(pdev), (unsigned long long)addr);
@@ -180,8 +180,8 @@ static inline void wanxl_tx_intr(struct port *port)
dev->stats.tx_bytes += skb->len;
}
desc->stat = PACKET_EMPTY; /* Free descriptor */
- pci_unmap_single(port->card->pdev, desc->address, skb->len,
- PCI_DMA_TODEVICE);
+ dma_unmap_single(&port->card->pdev->dev, desc->address,
+ skb->len, DMA_TO_DEVICE);
dev_consume_skb_irq(skb);
port->tx_in = (port->tx_in + 1) % TX_BUFFERS;
}
@@ -207,9 +207,9 @@ static inline void wanxl_rx_intr(struct card *card)
if (!skb)
dev->stats.rx_dropped++;
else {
- pci_unmap_single(card->pdev, desc->address,
- BUFFER_LENGTH,
- PCI_DMA_FROMDEVICE);
+ dma_unmap_single(&card->pdev->dev,
+ desc->address, BUFFER_LENGTH,
+ DMA_FROM_DEVICE);
skb_put(skb, desc->length);
#ifdef DEBUG_PKT
@@ -227,9 +227,10 @@ static inline void wanxl_rx_intr(struct card *card)
if (!skb) {
skb = dev_alloc_skb(BUFFER_LENGTH);
desc->address = skb ?
- pci_map_single(card->pdev, skb->data,
+ dma_map_single(&card->pdev->dev,
+ skb->data,
BUFFER_LENGTH,
- PCI_DMA_FROMDEVICE) : 0;
+ DMA_FROM_DEVICE) : 0;
card->rx_skbs[card->rx_in] = skb;
}
}
@@ -291,8 +292,8 @@ static netdev_tx_t wanxl_xmit(struct sk_buff *skb, struct net_device *dev)
#endif
port->tx_skbs[port->tx_out] = skb;
- desc->address = pci_map_single(port->card->pdev, skb->data, skb->len,
- PCI_DMA_TODEVICE);
+ desc->address = dma_map_single(&port->card->pdev->dev, skb->data,
+ skb->len, DMA_TO_DEVICE);
desc->length = skb->len;
desc->stat = PACKET_FULL;
writel(1 << (DOORBELL_TO_CARD_TX_0 + port->node),
@@ -451,9 +452,9 @@ static int wanxl_close(struct net_device *dev)
if (desc->stat != PACKET_EMPTY) {
desc->stat = PACKET_EMPTY;
- pci_unmap_single(port->card->pdev, desc->address,
- port->tx_skbs[i]->len,
- PCI_DMA_TODEVICE);
+ dma_unmap_single(&port->card->pdev->dev,
+ desc->address, port->tx_skbs[i]->len,
+ DMA_TO_DEVICE);
dev_kfree_skb(port->tx_skbs[i]);
}
}
@@ -524,9 +525,9 @@ static void wanxl_pci_remove_one(struct pci_dev *pdev)
for (i = 0; i < RX_QUEUE_LENGTH; i++)
if (card->rx_skbs[i]) {
- pci_unmap_single(card->pdev,
+ dma_unmap_single(&card->pdev->dev,
card->status->rx_descs[i].address,
- BUFFER_LENGTH, PCI_DMA_FROMDEVICE);
+ BUFFER_LENGTH, DMA_FROM_DEVICE);
dev_kfree_skb(card->rx_skbs[i]);
}
@@ -534,8 +535,8 @@ static void wanxl_pci_remove_one(struct pci_dev *pdev)
iounmap(card->plx);
if (card->status)
- pci_free_consistent(pdev, sizeof(struct card_status),
- card->status, card->status_address);
+ dma_free_coherent(&pdev->dev, sizeof(struct card_status),
+ card->status, card->status_address);
pci_release_regions(pdev);
pci_disable_device(pdev);
@@ -579,8 +580,8 @@ static int wanxl_pci_init_one(struct pci_dev *pdev,
We set both dma_mask and consistent_dma_mask to 28 bits
and pray pci_alloc_consistent() will use this info. It should
work on most platforms */
- if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(28)) ||
- pci_set_dma_mask(pdev, DMA_BIT_MASK(28))) {
+ if (dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(28)) ||
+ dma_set_mask(&pdev->dev, DMA_BIT_MASK(28))) {
pr_err("No usable DMA configuration\n");
pci_disable_device(pdev);
return -EIO;
@@ -608,9 +609,9 @@ static int wanxl_pci_init_one(struct pci_dev *pdev,
pci_set_drvdata(pdev, card);
card->pdev = pdev;
- card->status = pci_alloc_consistent(pdev,
- sizeof(struct card_status),
- &card->status_address);
+ card->status = dma_alloc_coherent(&pdev->dev,
+ sizeof(struct card_status),
+ &card->status_address, GFP_KERNEL);
if (card->status == NULL) {
wanxl_pci_remove_one(pdev);
return -ENOBUFS;
@@ -625,8 +626,8 @@ static int wanxl_pci_init_one(struct pci_dev *pdev,
/* FIXME when PCI/DMA subsystems are fixed.
We set both dma_mask and consistent_dma_mask back to 32 bits
to indicate the card can do 32-bit DMA addressing */
- if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) ||
- pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ if (dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)) ||
+ dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
pr_err("No usable DMA configuration\n");
wanxl_pci_remove_one(pdev);
return -EIO;
@@ -699,9 +700,8 @@ static int wanxl_pci_init_one(struct pci_dev *pdev,
card->rx_skbs[i] = skb;
if (skb)
card->status->rx_descs[i].address =
- pci_map_single(card->pdev, skb->data,
- BUFFER_LENGTH,
- PCI_DMA_FROMDEVICE);
+ dma_map_single(&card->pdev->dev, skb->data,
+ BUFFER_LENGTH, DMA_FROM_DEVICE);
}
mem = ioremap(mem_phy, PDM_OFFSET + sizeof(firmware));
--
2.25.1