Re: [PATCH v3 4/4] fpga: dfl: add support for N3000 nios private feature

[Xu Yilun]

Thanks for your quick response, I'm OK with most changes. Some comments
inline.

On Tue, Aug 04, 2020 at 08:56:12PM +0800, Wu, Hao wrote:
> > Subject: [PATCH v3 4/4] fpga: dfl: add support for N3000 nios private feature
> 
> > +#define NIOS_INIT0x1000
> > +#define NIOS_INIT_DONEBIT(0)
> > +#define NIOS_INIT_STARTBIT(1)
> > +/* Mode for PKVL A, link 0, the same below */
> > +#define REQ_FEC_MODE_A0_MSKGENMASK(9, 8)
> > +#define REQ_FEC_MODE_A1_MSKGENMASK(11, 10)
> > +#define REQ_FEC_MODE_A2_MSKGENMASK(13, 12)
> > +#define REQ_FEC_MODE_A3_MSKGENMASK(15, 14)
> > +#define REQ_FEC_MODE_B0_MSKGENMASK(17, 16)
> > +#define REQ_FEC_MODE_B1_MSKGENMASK(19, 18)
> > +#define REQ_FEC_MODE_B2_MSKGENMASK(21, 20)
> > +#define REQ_FEC_MODE_B3_MSKGENMASK(23, 22)
> > +#define REQ_FEC_MODE_NO0x0
> > +#define REQ_FEC_MODE_KR0x1
> > +#define REQ_FEC_MODE_RS0x2
> 
> What does REQ mean?

It's the abbreviation of REQUEST, on spec these fields names
REQUEST_FEC_MODE_X_X

> > +/* ns is the abbreviation of nios_spi */
> > +static int ns_bus_poll_stat_timeout(void __iomem *base, u64 *v)
> 
> Why adding "bus" here? I just see it's polling on register bits, right?
> It's a little confusing on ns_bus.

It is the polling for regmap read/write, the regmap is also called
regbus, so I name ns_bus here.

I could change the name, do you think there is confusing also for 
ns_bus_reg_read & ns_bus_reg_write?

Thanks,
Yilun.