[GIT PULL] RESEND: thermal for v5.9-rc1
From: Daniel Lezcano
Date: Thu Aug 06 2020 - 16:19:10 EST
The following changes since commit 9ebcfadb0610322ac537dd7aa5d9cbc2b2894c68:
Linux 5.8-rc3 (2020-06-28 15:00:24 -0700)
are available in the Git repository at:
ssh://git@xxxxxxxxxxxxxxxxxxx/pub/scm/linux/kernel/git/thermal/linux.git
tags/thermal-v5.9-rc1
for you to fetch changes up to c569e805c7bcebdd069e5c97ce5f8543f6d02433:
thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH
support (2020-08-04 10:43:03 +0200)
----------------------------------------------------------------
- Add support to enable/disable the thermal zones resulting on core code and
drivers cleanup (Andrzej Pietrasiewicz)
- Add generic netlink support for userspace notifications: events,
temperature
and discovery commands (Daniel Lezcano)
- Fix redundant initialization for a ret variable (Colin Ian King)
- Remove the clock cooling code as it is used nowhere (Amit Kucheria)
- Add the rcar_gen3_thermal's r8a774e1 support (Marian-Cristian Rotariu)
- Replace all references to thermal.txt in the documentation to the
corresponding yaml files (Amit Kucheria)
- Add maintainer entry for the IPA (Lukasz Luba)
- Add support for MSM8939 for the tsens (Shawn Guo)
- Update power allocator and devfreq cooling to SPDX licensing (Lukasz Luba)
- Add Cannon Lake Low Power PCH support (Sumeet Pawnikar)
- Add tsensor support for V2 mediatek thermal system (Henry Yen)
- Fix thermal zone lookup by ID for the core code (Thierry Reding)
----------------------------------------------------------------
Amit Kucheria (2):
thermal/drivers/clock_cooling: Remove clock_cooling code
dt-bindings: thermal: Get rid of thermal.txt and replace references
Andrzej Pietrasiewicz (14):
acpi: thermal: Fix error handling in the register function
thermal: Store thermal mode in a dedicated enum
thermal: Add current mode to thermal zone device
thermal: Store device mode in struct thermal_zone_device
thermal: remove get_mode() operation of drivers
thermal: Add mode helpers
thermal: Use mode helpers in drivers
thermal: Explicitly enable non-changing thermal zone devices
thermal: core: Stop polling DISABLED thermal devices
thermal: Simplify or eliminate unnecessary set_mode() methods
thermal: Rename set_mode() to change_mode()
acpi: thermal: Don't call thermal_zone_device_is_enabled()
thermal: imx: Use driver's local data to decide whether to run a
measurement
thermal: Make thermal_zone_device_is_enabled() available to core only
Anson Huang (1):
thermal: imx8mm: Support module autoloading
Colin Ian King (1):
thermal: core: remove redundant initialization of variable ret
Dan Carpenter (1):
thermal: ti-soc-thermal: Fix reversed condition in
ti_thermal_expose_sensor()
Daniel Lezcano (9):
thermal: core: Add helpers to browse the cdev, tz and governor list
thermal: core: Get thermal zone by id
thermal: core: genetlink support for events/cmd/sampling
thermal: core: Add notifications call in the framework
thermal: netlink: Fix compilation error when CONFIG_NET=n
net: genetlink: Move initialization to core_initcall
thermal: netlink: Improve the initcall ordering
thermal: core: Move initialization after core initcall
thermal: core: Add thermal zone enable/disable notification
Henry Yen (2):
thermal: mediatek: Prepare to add support for other platforms
thermal: mediatek: Add tsensor support for V2 thermal system
Konrad Dybcio (1):
dt-bindings: tsens: qcom: Document MSM8939 compatible
Lukas Bulwahn (1):
MAINTAINERS: update entry to thermal governors file name prefixing
Lukasz Luba (2):
MAINTAINERS: Add maintenance information for IPA
thermal: Update power allocator and devfreq cooling to SPDX licensing
Marian-Cristian Rotariu (1):
thermal: rcar_gen3_thermal: Add r8a774e1 support
Niklas Söderlund (1):
thermal: rcar_gen3_thermal: Do not shadow thcode variable
Shawn Guo (1):
thermal: qcom: tsens-v0_1: Add support for MSM8939
Sumeet Pawnikar (2):
thermal: int340x: processor_thermal: fix: update Jasper Lake PCI id
thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH
support
Thierry Reding (1):
thermal: core: Fix thermal zone lookup by ID
Documentation/devicetree/bindings/arm/arm,scmi.txt | 2 +-
Documentation/devicetree/bindings/arm/arm,scpi.txt | 2 +-
.../devicetree/bindings/arm/freescale/fsl,scu.txt | 2 +-
.../arm/marvell/ap80x-system-controller.txt | 2 +-
.../arm/marvell/cp110-system-controller.txt | 2 +-
.../devicetree/bindings/cpufreq/cpufreq-dt.txt | 3 +-
.../bindings/cpufreq/cpufreq-mediatek.txt | 4 +-
.../bindings/cpufreq/nvidia,tegra20-cpufreq.txt | 2 +-
.../devicetree/bindings/hwmon/gpio-fan.txt | 3 +-
Documentation/devicetree/bindings/hwmon/lm90.txt | 4 +-
.../bindings/thermal/allwinner,sun8i-a83t-ths.yaml | 2 +-
.../bindings/thermal/amazon,al-thermal.txt | 2 +-
.../bindings/thermal/brcm,avs-ro-thermal.yaml | 2 +-
.../bindings/thermal/brcm,bcm2835-thermal.txt | 2 +-
.../bindings/thermal/hisilicon-thermal.txt | 2 +-
.../bindings/thermal/max77620_thermal.txt | 6 +-
.../bindings/thermal/mediatek-thermal.txt | 2 +-
.../bindings/thermal/nvidia,tegra124-soctherm.txt | 10 +-
.../thermal/nvidia,tegra186-bpmp-thermal.txt | 2 +-
.../bindings/thermal/qcom-spmi-temp-alarm.txt | 2 +-
.../devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
.../bindings/thermal/rockchip-thermal.txt | 2 +-
.../devicetree/bindings/thermal/tango-thermal.txt | 2 +-
.../bindings/thermal/thermal-generic-adc.txt | 2 +-
.../devicetree/bindings/thermal/thermal.txt | 586
-------------------
MAINTAINERS | 8 +
drivers/acpi/thermal.c | 76 +--
drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.c | 8 +
drivers/net/ethernet/mellanox/mlxsw/core_thermal.c | 91 +--
drivers/net/wireless/intel/iwlwifi/mvm/tt.c | 9 +-
drivers/platform/x86/acerhdf.c | 33 +-
drivers/platform/x86/intel_mid_thermal.c | 6 +
drivers/power/supply/power_supply_core.c | 9 +-
drivers/thermal/Kconfig | 20 +-
drivers/thermal/Makefile | 6 +-
drivers/thermal/armada_thermal.c | 6 +
drivers/thermal/clock_cooling.c | 445 --------------
drivers/thermal/da9062-thermal.c | 16 +-
drivers/thermal/devfreq_cooling.c | 10 +-
drivers/thermal/dove_thermal.c | 6 +
drivers/thermal/gov_power_allocator.c | 9 +-
drivers/thermal/hisi_thermal.c | 6 +-
drivers/thermal/imx8mm_thermal.c | 1 +
drivers/thermal/imx_thermal.c | 60 +-
.../intel/int340x_thermal/int3400_thermal.c | 38 +-
.../intel/int340x_thermal/int340x_thermal_zone.c | 5 +
.../int340x_thermal/processor_thermal_device.c | 2 +-
drivers/thermal/intel/intel_pch_thermal.c | 8 +
drivers/thermal/intel/intel_quark_dts_thermal.c | 34 +-
drivers/thermal/intel/intel_soc_dts_iosf.c | 3 +
drivers/thermal/intel/x86_pkg_temp_thermal.c | 6 +
drivers/thermal/kirkwood_thermal.c | 7 +
drivers/thermal/mtk_thermal.c | 234 ++++++--
drivers/thermal/qcom/tsens-v0_1.c | 144 ++++-
drivers/thermal/qcom/tsens.c | 3 +
drivers/thermal/qcom/tsens.h | 2 +-
drivers/thermal/rcar_gen3_thermal.c | 10 +-
drivers/thermal/rcar_thermal.c | 9 +-
drivers/thermal/rockchip_thermal.c | 6 +-
drivers/thermal/spear_thermal.c | 7 +
drivers/thermal/sprd_thermal.c | 6 +-
drivers/thermal/st/st_thermal.c | 5 +
drivers/thermal/thermal_core.c | 174 +++++-
drivers/thermal/thermal_core.h | 15 +
drivers/thermal/thermal_helpers.c | 13 +-
drivers/thermal/thermal_netlink.c | 647
+++++++++++++++++++++
drivers/thermal/thermal_netlink.h | 104 ++++
drivers/thermal/thermal_of.c | 41 +-
drivers/thermal/thermal_sysfs.c | 52 +-
drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 2 +-
include/linux/clock_cooling.h | 57 --
include/linux/devfreq_cooling.h | 9 +-
include/linux/thermal.h | 31 +-
include/uapi/linux/thermal.h | 89 ++-
net/netlink/genetlink.c | 2 +-
75 files changed, 1632 insertions(+), 1609 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/thermal/thermal.txt
delete mode 100644 drivers/thermal/clock_cooling.c
create mode 100644 drivers/thermal/thermal_netlink.c
create mode 100644 drivers/thermal/thermal_netlink.h
delete mode 100644 include/linux/clock_cooling.h
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog