[PATCH 7/7] ARM: dts: r8a7742-iwg21d-q7: Add LCD support

[Lad Prabhakar]

The iwg21d comes with a 7" capacitive touch screen, therefore
add support for it.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@xxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 84 +++++++++++++++++++++++++
 1 file changed, 84 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
index b3461a61a4bf..cf59fd61e422 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -30,6 +30,7 @@
 
 /dts-v1/;
 #include "r8a7742-iwg21m.dtsi"
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "iWave Systems RainboW-G21D-Qseven board based on RZ/G1H";
@@ -52,6 +53,50 @@
 		clock-frequency = <26000000>;
 	};
 
+	lcd_backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpu 2 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		pinctrl-0 = <&backlight_pins>;
+		pinctrl-names = "default";
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	lvds-receiver {
+		compatible = "ti,ds90cf384a", "lvds-decoder";
+		powerdown-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				lvds_receiver_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				lvds_receiver_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0dh6";
+		backlight = <&lcd_backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_receiver_out>;
+			};
+		};
+	};
+
 	reg_1p5v: 1p5v {
 		compatible = "regulator-fixed";
 		regulator-name = "1P5V";
@@ -129,12 +174,31 @@
 		VDDIO-supply = <&reg_3p3v>;
 		VDDD-supply = <&reg_1p5v>;
 	};
+
+	touch: touchpanel@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+	};
 };
 
 &cmt0 {
 	status = "okay";
 };
 
+&du {
+	status = "okay";
+};
+
+&gpio0 {
+	touch-interrupt {
+		gpio-hog;
+		gpios = <24 GPIO_ACTIVE_LOW>;
+		input;
+	};
+};
+
 &hsusb {
 	pinctrl-0 = <&usb0_pins>;
 	pinctrl-names = "default";
@@ -165,6 +229,11 @@
 		function = "avb";
 	};
 
+	backlight_pins: backlight {
+		groups = "tpu0_to2";
+		function = "tpu0";
+	};
+
 	i2c2_pins: i2c2 {
 		groups = "i2c2_b";
 		function = "i2c2";
@@ -208,6 +277,17 @@
 	};
 };
 
+&lvds0 {
+	status = "okay";
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&lvds_receiver_in>;
+			};
+		};
+	};
+};
+
 &rcar_sound {
 	pinctrl-0 = <&sound_pins>;
 	pinctrl-names = "default";
@@ -261,6 +341,10 @@
 	shared-pin;
 };
 
+&tpu {
+	status = "okay";
+};
+
 &usbphy {
 	status = "okay";
 };
-- 
2.17.1