Re: [PATCH 00/33] Add driver for HiSilicon SPMI PMIC for Hikey 970
From: Mauro Carvalho Chehab
Date: Tue Aug 11 2020 - 11:54:41 EST
Em Tue, 11 Aug 2020 17:41:26 +0200
Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> escreveu:
> The Hikey 970 board uses a different PMIC than the one found on Hikey 960.
>
> This PMIC uses a SPMI board.
>
> This patch series backport the OOT drivers from the Linaro's official
> tree for this board:
>
> https://github.com/96boards-hikey/linux/tree/hikey970-v4.9
>
> Porting them to upstream, cleaning up coding style issues, solving
> driver probing order and adding DT documentation.
>
> I opted to not fold all patches into a single one, in order to:
>
> - Preserve the authorship of the original authors;
> - Keep a history of changes.
>
> As this could be harder for people to review, I'll be replying to patch 00/32
> with all patches folded. This should help reviewers to see the current
> code after the entire series is applied.
As promised, it follows the diff from this entire patch series.
Feel free to review either on the top of this e-mail or on the
individual patches.
Thanks!
Mauro
Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml | 175 ++++++++++++++++++++++++++++++++++++++
Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml | 54 ++++++++++++
MAINTAINERS | 8 ++
arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts | 16 +---
arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi | 200 ++++++++++++++++++++++++++++++++++++++++++++
drivers/mfd/Kconfig | 17 +++-
drivers/mfd/Makefile | 1 +
drivers/mfd/hi6421-spmi-pmic.c | 399 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/regulator/Kconfig | 8 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/hi6421v600-regulator.c | 493 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/spmi/Kconfig | 9 ++
drivers/spmi/Makefile | 2 +
drivers/spmi/hisi-spmi-controller.c | 384 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/spmi/spmi.c | 10 +--
include/linux/mfd/hi6421-spmi-pmic.h | 67 +++++++++++++++
16 files changed, 1826 insertions(+), 18 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
new file mode 100644
index 000000000000..33dcbaeb474e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/hisilicon,hi6421v600-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon 6421v600 SPMI PMIC
+
+maintainers:
+ - Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
+
+description: |
+ HiSilicon 6421v600 uses a MIPI System Power Management (SPMI) bus in order
+ to provide interrupts and power supply.
+
+ The GPIO and interrupt settings are represented as part of the top-level PMIC
+ node.
+
+ The SPMI controller part is provided by
+ Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml.
+
+properties:
+ $nodename:
+ pattern: "pmic@[0-9a-f]"
+
+ compatible:
+ const: hisilicon,hi6421-spmi-pmic
+
+ reg:
+ maxItems: 1
+
+ spmi-channel:
+ description: number of the SPMI channel where the PMIC is connected
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupt-controller:
+ description:
+ Identify that the PMIC is capable of behaving as an interrupt controller.
+
+ gpios:
+ maxItems: 1
+
+ irq-num:
+ description: Interrupt request number
+
+ 'irq-array':
+ description: Interrupt request array
+
+ 'irq-mask-addr':
+ description: Address for the interrupt request mask
+
+ 'irq-addr':
+ description: Address for the interrupt request
+
+ regulators:
+ type: object
+
+ properties:
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ patternProperties:
+ '^ldo@[0-9]+$':
+ type: object
+
+ $ref: "/schemas/regulator/regulator.yaml#"
+
+ properties:
+ reg:
+ description: Enable register.
+
+ vsel-reg:
+ description: Voltage selector register.
+
+ enable-mask:
+ description: Bitmask used to enable the regulator.
+
+# voltage-table:
+# description: Table with the selector items for the voltage regulator.
+# minItems: 2
+# maxItems: 16
+
+ off-on-delay-us:
+ description: Time required for changing state to enabled in microseconds.
+
+ startup-delay-us:
+ description: Startup time in microseconds.
+
+ idle-mode-mask:
+ description: Bitmask used to put the regulator on idle mode.
+
+ eco-microamp:
+ description: Maximum current while on idle mode.
+
+ required:
+ - reg
+ - vsel-reg
+ - enable-mask
+ - voltage-table
+ - off-on-delay-us
+ - startup-delay-us
+
+required:
+ - compatible
+ - reg
+ - spmi-channel
+ - regulators
+
+examples:
+ - |
+ pmic: pmic@0 {
+ compatible = "hisilicon,hi6421-spmi-pmic";
+ slave_id = <0>;
+ reg = <0 0>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ gpios = <&gpio28 0 0>;
+ irq-num = <16>;
+ irq-array = <2>;
+ irq-mask-addr = <0x202 2>;
+ irq-addr = <0x212 2>;
+
+ regulators {
+ ldo3: ldo3@16 {
+ reg = <0x16>;
+ vsel-reg = <0x51>;
+
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-boot-on;
+
+ enable-mask = <0x01>;
+
+ voltage-table = <1500000>, <1550000>,
+ <1600000>, <1650000>,
+ <1700000>, <1725000>,
+ <1750000>, <1775000>,
+ <1800000>, <1825000>,
+ <1850000>, <1875000>,
+ <1900000>, <1925000>,
+ <1950000>, <2000000>;
+ off-on-delay-us = <20000>;
+ startup-delay-us = <120>;
+ };
+
+ ldo4: ldo4@17 { /* 40 PIN */
+ reg = <0x17>;
+ vsel-reg = <0x52>;
+
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-boot-on;
+
+ enable-mask = <0x01>;
+ idle-mode-mask = <0x10>;
+ eco-microamp = <10000>;
+
+ hi6421-vsel = <0x52 0x07>;
+ voltage-table = <1725000>, <1750000>,
+ <1775000>, <1800000>,
+ <1825000>, <1850000>,
+ <1875000>, <1900000>;
+ off-on-delay-us = <20000>;
+ startup-delay-us = <120>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
new file mode 100644
index 000000000000..d087f9067e4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/hisilicon,hisi-spmi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon SPMI controller
+
+maintainers:
+ - Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
+
+description: |
+ The HiSilicon SPMI controller is found on some Kirin-based designs.
+ It is a MIPI System Power Management (SPMI) controller.
+
+ The PMIC part is provided by
+ Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml.
+
+properties:
+ $nodename:
+ pattern: "spmi@[0-9a-f]"
+
+ compatible:
+ const: hisilicon,spmi-controller
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 0
+
+ spmi-channel:
+ const: number of the SPMI channel where the PMIC is connected
+
+patternProperties:
+ "^pmic@[0-9a-f]$":
+ $ref: "/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml#"
+
+examples:
+ - |
+ spmi: spmi@fff24000 {
+ compatible = "hisilicon,spmi-controller";
+ #address-cells = <2>;
+ #size-cells = <0>;
+ status = "ok";
+ reg = <0x0 0xfff24000 0x0 0x1000>;
+ spmi-channel = <2>;
+
+ /* pmic properties */
+
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 956ecd5ba426..6410df78e301 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7736,6 +7736,14 @@ F: include/linux/hippidevice.h
F: include/uapi/linux/if_hippi.h
F: net/802/hippi.c
+HISILICON 6421v600 SPMI PMIC DRIVER
+M: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
+L: linux-kernel@xxxxxxxxxxxxxxx
+S: Maintained
+F: drivers/mfd/hi6421-spmi-pmic.c
+F: drivers/regulator/hi6421v600-regulator.c
+F: drivers/spmi/spmi.c
+
HISILICON DMA DRIVER
M: Zhou Wang <wangzhou1@xxxxxxxxxxxxx>
L: dmaengine@xxxxxxxxxxxxxxx
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
index 01234a175dcd..c8a72c0873bf 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
@@ -12,6 +12,7 @@
#include "hi3670.dtsi"
#include "hikey970-pinctrl.dtsi"
+#include "hikey970-pmic.dtsi"
/ {
model = "HiKey970";
@@ -39,7 +40,7 @@ memory@0 {
reg = <0x0 0x0 0x0 0x0>;
};
- sd_1v8: regulator-1v8 {
+ fixed_1v8: regulator-1v8 {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
@@ -47,15 +48,6 @@ sd_1v8: regulator-1v8 {
regulator-always-on;
};
- sd_3v3: regulator-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
wlan_en: wlan-en-1-8v {
compatible = "regulator-fixed";
regulator-name = "wlan-en-regulator";
@@ -402,8 +394,8 @@ &dwmmc1 {
pinctrl-0 = <&sd_pmx_func
&sd_clk_cfg_func
&sd_cfg_func>;
- vmmc-supply = <&sd_3v3>;
- vqmmc-supply = <&sd_1v8>;
+ vmmc-supply = <&ldo16>;
+ vqmmc-supply = <&ldo9>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
new file mode 100644
index 000000000000..2a6c366d9be6
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hi6421v600 SPMI PMIC used at the HiKey970 Development Board
+ *
+ * Copyright (C) 2020, Huawei Tech. Co., Ltd.
+ */
+
+/ {
+ spmi: spmi@fff24000 {
+ compatible = "hisilicon,spmi-controller";
+ #address-cells = <2>;
+ #size-cells = <0>;
+ status = "ok";
+ reg = <0x0 0xfff24000 0x0 0x1000>;
+ spmi-channel = <2>;
+
+ pmic: pmic@0 {
+ compatible = "hisilicon,hi6421-spmi-pmic";
+ slave_id = <0>;
+ reg = <0 0>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ gpios = <&gpio28 0 0>;
+ irq-num = <16>;
+ irq-array = <2>;
+ irq-mask-addr = <0x202 2>;
+ irq-addr = <0x212 2>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ldo3: ldo3@16 {
+ reg = <0x16>;
+ vsel-reg = <0x51>;
+
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-boot-on;
+
+ enable-mask = <0x01>;
+
+ voltage-table = <1500000>, <1550000>,
+ <1600000>, <1650000>,
+ <1700000>, <1725000>,
+ <1750000>, <1775000>,
+ <1800000>, <1825000>,
+ <1850000>, <1875000>,
+ <1900000>, <1925000>,
+ <1950000>, <2000000>;
+ off-on-delay-us = <20000>;
+ startup-delay-us = <120>;
+ };
+
+ ldo4: ldo4@17 { /* 40 PIN */
+ reg = <0x17>;
+ vsel-reg = <0x52>;
+
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-boot-on;
+
+ enable-mask = <0x01>;
+ idle-mode-mask = <0x10>;
+ eco-microamp = <10000>;
+
+ hi6421-vsel = <0x52 0x07>;
+ voltage-table = <1725000>, <1750000>,
+ <1775000>, <1800000>,
+ <1825000>, <1850000>,
+ <1875000>, <1900000>;
+ off-on-delay-us = <20000>;
+ startup-delay-us = <120>;
+ };
+
+ ldo9: ldo9@1C { /* SDCARD I/O */
+ reg = <0x1C>;
+ vsel-reg = <0x57>;
+
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+
+ enable-mask = <0x01>;
+ idle-mode-mask = <0x10>;
+ eco-microamp = <10000>;
+
+ voltage-table = <1750000>, <1800000>,
+ <1825000>, <2800000>,
+ <2850000>, <2950000>,
+ <3000000>, <3300000>;
+ off-on-delay-us = <20000>;
+ startup-delay-us = <360>;
+ };
+
+ ldo15: ldo15@21 { /* UFS */
+ reg = <0x21>;
+ vsel-reg = <0x5c>;
+
+ regulator-name = "ldo15";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+
+ enable-mask = <0x01>;
+ idle-mode-mask = <0x10>;
+ eco-microamp = <10000>;
+
+ voltage-table = <1800000>, <1850000>,
+ <2400000>, <2600000>,
+ <2700000>, <2850000>,
+ <2950000>, <3000000>;
+ off-on-delay-us = <20000>;
+ startup-delay-us = <120>;
+ };
+
+ ldo16: ldo16@22 { /* SD */
+ reg = <0x22>;
+ vsel-reg = <0x5d>;
+
+ regulator-name = "ldo16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+
+ enable-mask = <0x01>;
+ idle-mode-mask = <0x10>;
+ eco-microamp = <10000>;
+
+ voltage-table = <1800000>, <1850000>,
+ <2400000>, <2600000>,
+ <2700000>, <2850000>,
+ <2950000>, <3000000>;
+ off-on-delay-us = <20000>;
+ startup-delay-us = <360>;
+ };
+
+ ldo17: ldo17@23 {
+ reg = <0x23>;
+ vsel-reg = <0x5e>;
+
+ regulator-name = "ldo17";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+
+ enable-mask = <0x01>;
+ idle-mode-mask = <0x10>;
+ eco-microamp = <10000>;
+
+ voltage-table = <2500000>, <2600000>,
+ <2700000>, <2800000>,
+ <3000000>, <3100000>,
+ <3200000>, <3300000>;
+ off-on-delay-us = <20000>;
+ startup-delay-us = <120>;
+ };
+
+ ldo33: ldo33@32 { /* PEX8606 */
+ reg = <0x32>;
+ vsel-reg = <0x6d>;
+ regulator-name = "ldo33";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+
+ enable-mask = <0x01>;
+
+ voltage-table = <2500000>, <2600000>,
+ <2700000>, <2800000>,
+ <3000000>, <3100000>,
+ <3200000>, <3300000>;
+ off-on-delay-us = <20000>;
+ startup-delay-us = <120>;
+ };
+
+ ldo34: ldo34@33 { /* GPS AUX IN VDD */
+ reg = <0x33>;
+ vsel-reg = <0x6e>;
+
+ regulator-name = "ldo34";
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3300000>;
+
+ enable-mask = <0x01>;
+
+ voltage-table = <2600000>, <2700000>,
+ <2800000>, <2900000>,
+ <3000000>, <3100000>,
+ <3200000>, <3300000>;
+ off-on-delay-us = <20000>;
+ startup-delay-us = <120>;
+ };
+ };
+ };
+ };
+};
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index a37d7d171382..04c249649532 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -493,10 +493,25 @@ config MFD_HI6421_PMIC
Add support for HiSilicon Hi6421 PMIC. Hi6421 includes multi-
functions, such as regulators, RTC, codec, Coulomb counter, etc.
This driver includes core APIs _only_. You have to select
- individul components like voltage regulators under corresponding
+ individual components like voltage regulators under corresponding
menus in order to enable them.
We communicate with the Hi6421 via memory-mapped I/O.
+config MFD_HI6421_SPMI
+ tristate "HiSilicon Hi6421v600 SPMI PMU/Codec IC"
+ depends on OF
+ select MFD_CORE
+ select REGMAP_MMIO
+ help
+ Add support for HiSilicon Hi6421v600 SPMI PMIC. Hi6421 includes
+ multi-functions, such as regulators, RTC, codec, Coulomb counter,
+ etc.
+
+ This driver includes core APIs _only_. You have to select
+ individual components like voltage regulators under corresponding
+ menus in order to enable them.
+ We communicate with the Hi6421v600 via a SPMI bus.
+
config MFD_HI655X_PMIC
tristate "HiSilicon Hi655X series PMU/Codec IC"
depends on ARCH_HISI || COMPILE_TEST
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 9367a92f795a..2ac0727dafc9 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -233,6 +233,7 @@ obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
obj-$(CONFIG_MFD_IQS62X) += iqs62x.o
obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o
obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
+obj-$(CONFIG_MFD_HI6421_SPMI) += hi6421-spmi-pmic.o
obj-$(CONFIG_MFD_HI655X_PMIC) += hi655x-pmic.o
obj-$(CONFIG_MFD_DLN2) += dln2.o
obj-$(CONFIG_MFD_RT5033) += rt5033.o
diff --git a/drivers/mfd/hi6421-spmi-pmic.c b/drivers/mfd/hi6421-spmi-pmic.c
new file mode 100644
index 000000000000..d8b84d64041e
--- /dev/null
+++ b/drivers/mfd/hi6421-spmi-pmic.c
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device driver for regulators in HISI PMIC IC
+ *
+ * Copyright (c) 2013 Linaro Ltd.
+ * Copyright (c) 2011 Hisilicon.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mfd/core.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
+#include <linux/mfd/hi6421-spmi-pmic.h>
+#include <linux/irq.h>
+#include <linux/spmi.h>
+#ifndef NO_IRQ
+#define NO_IRQ 0
+#endif
+
+/* 8-bit register offset in PMIC */
+#define HISI_MASK_STATE 0xff
+
+#define HISI_IRQ_KEY_NUM 0
+#define HISI_IRQ_KEY_VALUE 0xc0
+#define HISI_IRQ_KEY_DOWN 7
+#define HISI_IRQ_KEY_UP 6
+
+/*#define HISI_NR_IRQ 25*/
+#define HISI_MASK_FIELD 0xFF
+#define HISI_BITS 8
+
+/*define the first group interrupt register number*/
+#define HISI_PMIC_FIRST_GROUP_INT_NUM 2
+
+static const struct mfd_cell hi6421v600_devs[] = {
+ { .name = "hi6421v600-regulator", },
+};
+
+/*
+ * The PMIC register is only 8-bit.
+ * Hisilicon SoC use hardware to map PMIC register into SoC mapping.
+ * At here, we are accessing SoC register with 32-bit.
+ */
+u32 hi6421_spmi_pmic_read(struct hi6421_spmi_pmic *pmic, int reg)
+{
+ u32 ret;
+ u8 read_value = 0;
+ struct spmi_device *pdev;
+
+ pdev = to_spmi_device(pmic->dev);
+ if (!pdev) {
+ pr_err("%s: pdev get failed!\n", __func__);
+ return 0;
+ }
+
+ ret = spmi_ext_register_readl(pdev, reg,
+ (unsigned char *)&read_value, 1);
+ if (ret) {
+ pr_err("%s: spmi_ext_register_readl failed!\n", __func__);
+ return 0;
+ }
+ return (u32)read_value;
+}
+EXPORT_SYMBOL(hi6421_spmi_pmic_read);
+
+void hi6421_spmi_pmic_write(struct hi6421_spmi_pmic *pmic, int reg, u32 val)
+{
+ u32 ret;
+ struct spmi_device *pdev;
+
+ pdev = to_spmi_device(pmic->dev);
+ if (!pdev) {
+ pr_err("%s: pdev get failed!\n", __func__);
+ return;
+ }
+
+ ret = spmi_ext_register_writel(pdev, reg, (unsigned char *)&val, 1);
+ if (ret) {
+ pr_err("%s: spmi_ext_register_writel failed!\n", __func__);
+ return;
+ }
+}
+EXPORT_SYMBOL(hi6421_spmi_pmic_write);
+
+void hi6421_spmi_pmic_rmw(struct hi6421_spmi_pmic *pmic, int reg,
+ u32 mask, u32 bits)
+{
+ u32 data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pmic->lock, flags);
+ data = hi6421_spmi_pmic_read(pmic, reg) & ~mask;
+ data |= mask & bits;
+ hi6421_spmi_pmic_write(pmic, reg, data);
+ spin_unlock_irqrestore(&pmic->lock, flags);
+}
+EXPORT_SYMBOL(hi6421_spmi_pmic_rmw);
+
+static irqreturn_t hi6421_spmi_irq_handler(int irq, void *data)
+{
+ struct hi6421_spmi_pmic *pmic = (struct hi6421_spmi_pmic *)data;
+ unsigned long pending;
+ int i, offset;
+
+ for (i = 0; i < pmic->irqarray; i++) {
+ pending = hi6421_spmi_pmic_read(pmic, (i + pmic->irq_addr.start_addr));
+ pending &= HISI_MASK_FIELD;
+ if (pending != 0)
+ pr_debug("pending[%d]=0x%lx\n\r", i, pending);
+
+ hi6421_spmi_pmic_write(pmic, (i + pmic->irq_addr.start_addr),
+ pending);
+
+ /* solve powerkey order */
+ if ((i == HISI_IRQ_KEY_NUM) && ((pending & HISI_IRQ_KEY_VALUE) == HISI_IRQ_KEY_VALUE)) {
+ generic_handle_irq(pmic->irqs[HISI_IRQ_KEY_DOWN]);
+ generic_handle_irq(pmic->irqs[HISI_IRQ_KEY_UP]);
+ pending &= (~HISI_IRQ_KEY_VALUE);
+ }
+
+ if (pending) {
+ for_each_set_bit(offset, &pending, HISI_BITS)
+ generic_handle_irq(pmic->irqs[offset + i * HISI_BITS]);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void hi6421_spmi_irq_mask(struct irq_data *d)
+{
+ struct hi6421_spmi_pmic *pmic = irq_data_get_irq_chip_data(d);
+ u32 data, offset;
+ unsigned long flags;
+
+ offset = (irqd_to_hwirq(d) >> 3);
+ offset += pmic->irq_mask_addr.start_addr;
+
+ spin_lock_irqsave(&pmic->lock, flags);
+ data = hi6421_spmi_pmic_read(pmic, offset);
+ data |= (1 << (irqd_to_hwirq(d) & 0x07));
+ hi6421_spmi_pmic_write(pmic, offset, data);
+ spin_unlock_irqrestore(&pmic->lock, flags);
+}
+
+static void hi6421_spmi_irq_unmask(struct irq_data *d)
+{
+ struct hi6421_spmi_pmic *pmic = irq_data_get_irq_chip_data(d);
+ u32 data, offset;
+ unsigned long flags;
+
+ offset = (irqd_to_hwirq(d) >> 3);
+ offset += pmic->irq_mask_addr.start_addr;
+
+ spin_lock_irqsave(&pmic->lock, flags);
+ data = hi6421_spmi_pmic_read(pmic, offset);
+ data &= ~(1 << (irqd_to_hwirq(d) & 0x07));
+ hi6421_spmi_pmic_write(pmic, offset, data);
+ spin_unlock_irqrestore(&pmic->lock, flags);
+}
+
+static struct irq_chip hi6421_spmi_pmu_irqchip = {
+ .name = "hisi-irq",
+ .irq_mask = hi6421_spmi_irq_mask,
+ .irq_unmask = hi6421_spmi_irq_unmask,
+ .irq_disable = hi6421_spmi_irq_mask,
+ .irq_enable = hi6421_spmi_irq_unmask,
+};
+
+static int hi6421_spmi_irq_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct hi6421_spmi_pmic *pmic = d->host_data;
+
+ irq_set_chip_and_handler_name(virq, &hi6421_spmi_pmu_irqchip,
+ handle_simple_irq, "hisi");
+ irq_set_chip_data(virq, pmic);
+ irq_set_irq_type(virq, IRQ_TYPE_NONE);
+
+ return 0;
+}
+
+static const struct irq_domain_ops hi6421_spmi_domain_ops = {
+ .map = hi6421_spmi_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static int get_pmic_device_tree_data(struct device_node *np,
+ struct hi6421_spmi_pmic *pmic)
+{
+ int ret = 0;
+
+ /*get pmic irq num*/
+ ret = of_property_read_u32_array(np, "irq-num",
+ &pmic->irqnum, 1);
+ if (ret) {
+ pr_err("no irq-num property set\n");
+ ret = -ENODEV;
+ return ret;
+ }
+
+ /*get pmic irq array number*/
+ ret = of_property_read_u32_array(np, "irq-array",
+ &pmic->irqarray, 1);
+ if (ret) {
+ pr_err("no irq-array property set\n");
+ ret = -ENODEV;
+ return ret;
+ }
+
+ /*SOC_PMIC_IRQ_MASK_0_ADDR*/
+ ret = of_property_read_u32_array(np, "irq-mask-addr",
+ (int *)&pmic->irq_mask_addr, 2);
+ if (ret) {
+ pr_err("no irq-mask-addr property set\n");
+ ret = -ENODEV;
+ return ret;
+ }
+
+ /*SOC_PMIC_IRQ0_ADDR*/
+ ret = of_property_read_u32_array(np, "irq-addr",
+ (int *)&pmic->irq_addr, 2);
+ if (ret) {
+ pr_err("no irq-addr property set\n");
+ ret = -ENODEV;
+ return ret;
+ }
+
+ return ret;
+}
+
+static void hi6421_spmi_pmic_irq_prc(struct hi6421_spmi_pmic *pmic)
+{
+ int i;
+
+ for (i = 0 ; i < pmic->irq_mask_addr.array; i++)
+ hi6421_spmi_pmic_write(pmic, pmic->irq_mask_addr.start_addr + i,
+ HISI_MASK_STATE);
+
+ for (i = 0 ; i < pmic->irq_addr.array; i++) {
+ unsigned int pending = hi6421_spmi_pmic_read(pmic, pmic->irq_addr.start_addr + i);
+
+ pr_debug("PMU IRQ address value:irq[0x%x] = 0x%x\n",
+ pmic->irq_addr.start_addr + i, pending);
+ hi6421_spmi_pmic_write(pmic, pmic->irq_addr.start_addr + i,
+ HISI_MASK_STATE);
+ }
+}
+
+static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct hi6421_spmi_pmic *pmic = NULL;
+ enum of_gpio_flags flags;
+ int ret = 0;
+ int i;
+ unsigned int virq;
+
+ pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
+ if (!pmic)
+ return -ENOMEM;
+
+ /*TODO: get pmic dts info*/
+ ret = get_pmic_device_tree_data(np, pmic);
+ if (ret) {
+ dev_err(&pdev->dev, "Error reading hisi pmic dts\n");
+ return ret;
+ }
+
+ /* TODO: get and enable clk request */
+ spin_lock_init(&pmic->lock);
+
+ pmic->dev = dev;
+
+ pmic->gpio = of_get_gpio_flags(np, 0, &flags);
+ if (pmic->gpio < 0)
+ return pmic->gpio;
+
+ if (!gpio_is_valid(pmic->gpio))
+ return -EINVAL;
+
+ ret = gpio_request_one(pmic->gpio, GPIOF_IN, "pmic");
+ if (ret < 0) {
+ dev_err(dev, "failed to request gpio%d\n", pmic->gpio);
+ return ret;
+ }
+
+ pmic->irq = gpio_to_irq(pmic->gpio);
+
+ /* mask && clear IRQ status */
+ hi6421_spmi_pmic_irq_prc(pmic);
+
+ pmic->irqs = devm_kzalloc(dev, pmic->irqnum * sizeof(int), GFP_KERNEL);
+ if (!pmic->irqs)
+ goto irq_malloc;
+
+ pmic->domain = irq_domain_add_simple(np, pmic->irqnum, 0,
+ &hi6421_spmi_domain_ops, pmic);
+ if (!pmic->domain) {
+ dev_err(dev, "failed irq domain add simple!\n");
+ ret = -ENODEV;
+ goto irq_domain;
+ }
+
+ for (i = 0; i < pmic->irqnum; i++) {
+ virq = irq_create_mapping(pmic->domain, i);
+ if (virq == NO_IRQ) {
+ pr_debug("Failed mapping hwirq\n");
+ ret = -ENOSPC;
+ goto irq_create_mapping;
+ }
+ pmic->irqs[i] = virq;
+ pr_info("[%s]. pmic->irqs[%d] = %d\n", __func__, i, pmic->irqs[i]);
+ }
+
+ ret = request_threaded_irq(pmic->irq, hi6421_spmi_irq_handler, NULL,
+ IRQF_TRIGGER_LOW | IRQF_SHARED | IRQF_NO_SUSPEND,
+ "pmic", pmic);
+ if (ret < 0) {
+ dev_err(dev, "could not claim pmic %d\n", ret);
+ ret = -ENODEV;
+ goto request_theaded_irq;
+ }
+
+ dev_set_drvdata(&pdev->dev, pmic);
+
+ /*
+ * The logic below will rely that the pmic is already stored at
+ * drvdata.
+ */
+ dev_dbg(&pdev->dev, "SPMI-PMIC: adding children for %pOF\n",
+ pdev->dev.of_node);
+ ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
+ hi6421v600_devs, ARRAY_SIZE(hi6421v600_devs),
+ NULL, 0, NULL);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to add child devices: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+
+request_theaded_irq:
+irq_create_mapping:
+irq_domain:
+irq_malloc:
+ gpio_free(pmic->gpio);
+ return ret;
+}
+
+static void hi6421_spmi_pmic_remove(struct spmi_device *pdev)
+{
+ struct hi6421_spmi_pmic *pmic = dev_get_drvdata(&pdev->dev);
+
+ free_irq(pmic->irq, pmic);
+ gpio_free(pmic->gpio);
+ devm_kfree(&pdev->dev, pmic);
+}
+
+static const struct of_device_id pmic_spmi_id_table[] = {
+ { .compatible = "hisilicon,hi6421-spmi-pmic" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pmic_spmi_id_table);
+
+static struct spmi_driver hi6421_spmi_pmic_driver = {
+ .driver = {
+ .name = "hi6421-spmi-pmic",
+ .of_match_table = pmic_spmi_id_table,
+ },
+ .probe = hi6421_spmi_pmic_probe,
+ .remove = hi6421_spmi_pmic_remove,
+};
+module_spmi_driver(hi6421_spmi_pmic_driver);
+
+MODULE_DESCRIPTION("HiSilicon Hi6421v600 SPMI PMIC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index edb1c4f8b496..de8a78487bb9 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -356,6 +356,14 @@ config REGULATOR_HI6421V530
provides 5 general purpose LDOs, and all of them come with support
to either ECO (idle) or sleep mode.
+config REGULATOR_HI6421V600
+ tristate "HiSilicon Hi6421v600 PMIC voltage regulator support"
+ depends on MFD_HI6421_PMIC && OF
+ help
+ This driver provides support for the voltage regulators on
+ HiSilicon Hi6421v600 PMU / Codec IC.
+ This is used on Kirin 3670 boards, like HiKey 970.
+
config REGULATOR_HI655X
tristate "Hisilicon HI655X PMIC regulators support"
depends on ARCH_HISI || COMPILE_TEST
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 0796e4a47afa..f59d5e3b5fd4 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o
obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o
obj-$(CONFIG_REGULATOR_HI6421V530) += hi6421v530-regulator.o
+obj-$(CONFIG_REGULATOR_HI6421V600) += hi6421v600-regulator.o
obj-$(CONFIG_REGULATOR_HI655X) += hi655x-regulator.o
obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o
diff --git a/drivers/regulator/hi6421v600-regulator.c b/drivers/regulator/hi6421v600-regulator.c
new file mode 100644
index 000000000000..c80dfac1e4c3
--- /dev/null
+++ b/drivers/regulator/hi6421v600-regulator.c
@@ -0,0 +1,493 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device driver for regulators in Hisi IC
+ *
+ * Copyright (c) 2013 Linaro Ltd.
+ * Copyright (c) 2011 Hisilicon.
+ *
+ * Guodong Xu <guodong.xu@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/hi6421-spmi-pmic.h>
+#include <linux/delay.h>
+#include <linux/time.h>
+#include <linux/version.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
+#include <linux/spmi.h>
+
+#define rdev_dbg(rdev, fmt, arg...) \
+ pr_debug("%s: %s: " fmt, (rdev)->desc->name, __func__, ##arg)
+
+struct hi6421v600_regulator {
+ struct regulator_desc rdesc;
+ struct hi6421_spmi_pmic *pmic;
+ u32 eco_mode_mask, eco_uA;
+};
+
+static DEFINE_MUTEX(enable_mutex);
+
+/* helper function to ensure when it returns it is at least 'delay_us'
+ * microseconds after 'since'.
+ */
+
+static int hi6421_spmi_regulator_is_enabled(struct regulator_dev *rdev)
+{
+ u32 reg_val;
+ struct hi6421v600_regulator *sreg = rdev_get_drvdata(rdev);
+ struct hi6421_spmi_pmic *pmic = sreg->pmic;
+
+ reg_val = hi6421_spmi_pmic_read(pmic, rdev->desc->enable_reg);
+
+ rdev_dbg(rdev,
+ "enable_reg=0x%x, val= 0x%x, enable_state=%d\n",
+ rdev->desc->enable_reg,
+ reg_val, (reg_val & rdev->desc->enable_mask));
+
+ return ((reg_val & rdev->desc->enable_mask) != 0);
+}
+
+static int hi6421_spmi_regulator_enable(struct regulator_dev *rdev)
+{
+ struct hi6421v600_regulator *sreg = rdev_get_drvdata(rdev);
+ struct hi6421_spmi_pmic *pmic = sreg->pmic;
+
+ /* cannot enable more than one regulator at one time */
+ mutex_lock(&enable_mutex);
+ usleep_range(HISI_REGS_ENA_PROTECT_TIME,
+ HISI_REGS_ENA_PROTECT_TIME + 1000);
+
+ /* set enable register */
+ rdev_dbg(rdev,
+ "off_on_delay=%d us, enable_reg=0x%x, enable_mask=0x%x\n",
+ rdev->desc->off_on_delay, rdev->desc->enable_reg,
+ rdev->desc->enable_mask);
+
+ hi6421_spmi_pmic_rmw(pmic, rdev->desc->enable_reg,
+ rdev->desc->enable_mask,
+ rdev->desc->enable_mask);
+
+ mutex_unlock(&enable_mutex);
+
+ return 0;
+}
+
+static int hi6421_spmi_regulator_disable(struct regulator_dev *rdev)
+{
+ struct hi6421v600_regulator *sreg = rdev_get_drvdata(rdev);
+ struct hi6421_spmi_pmic *pmic = sreg->pmic;
+
+ /* set enable register to 0 */
+ rdev_dbg(rdev, "enable_reg=0x%x, enable_mask=0x%x\n",
+ rdev->desc->enable_reg, rdev->desc->enable_mask);
+
+ hi6421_spmi_pmic_rmw(pmic, rdev->desc->enable_reg,
+ rdev->desc->enable_mask, 0);
+
+ return 0;
+}
+
+static int hi6421_spmi_regulator_get_voltage_sel(struct regulator_dev *rdev)
+{
+ struct hi6421v600_regulator *sreg = rdev_get_drvdata(rdev);
+ struct hi6421_spmi_pmic *pmic = sreg->pmic;
+ u32 reg_val, selector;
+
+ /* get voltage selector */
+ reg_val = hi6421_spmi_pmic_read(pmic, rdev->desc->vsel_reg);
+
+ selector = (reg_val & rdev->desc->vsel_mask) >> (ffs(rdev->desc->vsel_mask) - 1);
+
+ rdev_dbg(rdev,
+ "vsel_reg=0x%x, value=0x%x, entry=0x%x, voltage=%d mV\n",
+ rdev->desc->vsel_reg, reg_val, selector,
+ rdev->desc->ops->list_voltage(rdev, selector) / 1000);
+
+ return selector;
+}
+
+static int hi6421_spmi_regulator_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ struct hi6421v600_regulator *sreg = rdev_get_drvdata(rdev);
+ struct hi6421_spmi_pmic *pmic = sreg->pmic;
+ u32 reg_val;
+
+ /* unlikely to happen. sanity test done by regulator core */
+ if (unlikely(selector >= rdev->desc->n_voltages))
+ return -EINVAL;
+
+ reg_val = selector << (ffs(rdev->desc->vsel_mask) - 1);
+
+ /* set voltage selector */
+ rdev_dbg(rdev,
+ "vsel_reg=0x%x, mask=0x%x, value=0x%x, voltage=%d mV\n",
+ rdev->desc->vsel_reg, rdev->desc->vsel_mask, reg_val,
+ rdev->desc->ops->list_voltage(rdev, selector) / 1000);
+
+ hi6421_spmi_pmic_rmw(pmic, rdev->desc->vsel_reg,
+ rdev->desc->vsel_mask, reg_val);
+
+ return 0;
+}
+
+static unsigned int hi6421_spmi_regulator_get_mode(struct regulator_dev *rdev)
+{
+ struct hi6421v600_regulator *sreg = rdev_get_drvdata(rdev);
+ struct hi6421_spmi_pmic *pmic = sreg->pmic;
+ u32 reg_val;
+ unsigned int mode;
+
+ reg_val = hi6421_spmi_pmic_read(pmic, rdev->desc->enable_reg);
+
+ if (reg_val & sreg->eco_mode_mask)
+ mode = REGULATOR_MODE_IDLE;
+ else
+ mode = REGULATOR_MODE_NORMAL;
+
+ rdev_dbg(rdev,
+ "enable_reg=0x%x, eco_mode_mask=0x%x, reg_val=0x%x, %s mode\n",
+ rdev->desc->enable_reg, sreg->eco_mode_mask, reg_val,
+ mode == REGULATOR_MODE_IDLE ? "idle" : "normal");
+
+ return mode;
+}
+
+static int hi6421_spmi_regulator_set_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct hi6421v600_regulator *sreg = rdev_get_drvdata(rdev);
+ struct hi6421_spmi_pmic *pmic = sreg->pmic;
+ u32 val;
+
+ switch (mode) {
+ case REGULATOR_MODE_NORMAL:
+ val = 0;
+ break;
+ case REGULATOR_MODE_IDLE:
+ val = sreg->eco_mode_mask << (ffs(sreg->eco_mode_mask) - 1);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* set mode */
+ rdev_dbg(rdev, "enable_reg=0x%x, eco_mode_mask=0x%x, value=0x%x\n",
+ rdev->desc->enable_reg, sreg->eco_mode_mask, val);
+
+ hi6421_spmi_pmic_rmw(pmic, rdev->desc->enable_reg,
+ sreg->eco_mode_mask, val);
+
+ return 0;
+}
+
+static unsigned int
+hi6421_spmi_regulator_get_optimum_mode(struct regulator_dev *rdev,
+ int input_uV, int output_uV,
+ int load_uA)
+{
+ struct hi6421v600_regulator *sreg = rdev_get_drvdata(rdev);
+
+ if (load_uA || ((unsigned int)load_uA > sreg->eco_uA)) {
+ rdev_dbg(rdev, "normal mode");
+ return REGULATOR_MODE_NORMAL;
+ } else {
+ rdev_dbg(rdev, "idle mode");
+ return REGULATOR_MODE_IDLE;
+ }
+}
+
+static int hi6421_spmi_dt_parse(struct platform_device *pdev,
+ struct hi6421v600_regulator *sreg,
+ struct regulator_desc *rdesc)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ unsigned int *v_table;
+ int ret;
+
+ ret = of_property_read_u32(np, "reg", &rdesc->enable_reg);
+ if (ret) {
+ dev_err(dev, "missing reg property\nn");
+ return ret;
+ }
+
+ ret = of_property_read_u32(np, "vsel-reg", &rdesc->vsel_reg);
+ if (ret) {
+ dev_err(dev, "missing vsel-reg property\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(np, "enable-mask", &rdesc->enable_mask);
+ if (ret) {
+ dev_err(dev, "missing enable-mask property\n");
+ return ret;
+ }
+
+ /*
+ * Not all regulators work on idle mode
+ */
+ ret = of_property_read_u32(np, "idle-mode-mask", &sreg->eco_mode_mask);
+ if (ret) {
+ dev_dbg(dev, "LDO doesn't support economy mode.\n");
+ sreg->eco_mode_mask = 0;
+ sreg->eco_uA = 0;
+ } else {
+ ret = of_property_read_u32(np, "eco-microamp",
+ &sreg->eco_uA);
+ if (ret) {
+ dev_err(dev, "missing eco-microamp property\n");
+ return ret;
+ }
+ }
+
+ /* parse .off-on-delay */
+ ret = of_property_read_u32(np, "off-on-delay-us",
+ &rdesc->off_on_delay);
+ if (ret) {
+ dev_err(dev, "missing off-on-delay-us property\n");
+ return ret;
+ }
+
+ /* parse .enable_time */
+ ret = of_property_read_u32(np, "startup-delay-us",
+ &rdesc->enable_time);
+ if (ret) {
+ dev_err(dev, "missing startup-delay-us property\n");
+ return ret;
+ }
+
+ /* FIXME: are there a better value for this? */
+ rdesc->ramp_delay = rdesc->enable_time;
+
+ /* parse volt_table */
+
+ rdesc->n_voltages = of_property_count_u32_elems(np, "voltage-table");
+
+ v_table = devm_kzalloc(dev, sizeof(unsigned int) * rdesc->n_voltages,
+ GFP_KERNEL);
+ if (unlikely(!v_table))
+ return -ENOMEM;
+ rdesc->volt_table = v_table;
+
+ ret = of_property_read_u32_array(np, "voltage-table",
+ v_table, rdesc->n_voltages);
+ if (ret) {
+ dev_err(dev, "missing voltage-table property\n");
+ return ret;
+ }
+
+ /*
+ * Instead of explicitly requiring a mask for the voltage selector,
+ * as they all start from bit zero (at least on the known LDOs),
+ * just use the number of voltages at the voltage table, getting the
+ * minimal mask that would pick everything.
+ */
+ rdesc->vsel_mask = (1 << (fls(rdesc->n_voltages) - 1)) - 1;
+
+ dev_dbg(dev, "voltage selector settings: reg: 0x%x, mask: 0x%x",
+ rdesc->vsel_reg, rdesc->vsel_mask);
+
+ return 0;
+}
+
+static struct regulator_ops hi6421_spmi_ldo_rops = {
+ .is_enabled = hi6421_spmi_regulator_is_enabled,
+ .enable = hi6421_spmi_regulator_enable,
+ .disable = hi6421_spmi_regulator_disable,
+ .list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_iterate,
+ .get_voltage_sel = hi6421_spmi_regulator_get_voltage_sel,
+ .set_voltage_sel = hi6421_spmi_regulator_set_voltage_sel,
+ .get_mode = hi6421_spmi_regulator_get_mode,
+ .set_mode = hi6421_spmi_regulator_set_mode,
+ .get_optimum_mode = hi6421_spmi_regulator_get_optimum_mode,
+};
+
+/*
+ * Used only for parsing the DT properties
+ */
+
+static int hi6421_spmi_regulator_probe_ldo(struct platform_device *pdev,
+ struct device_node *np,
+ struct hi6421_spmi_pmic *pmic)
+{
+ struct device *dev = &pdev->dev;
+ struct regulator_desc *rdesc;
+ struct regulator_dev *rdev;
+ struct hi6421v600_regulator *sreg = NULL;
+ struct regulator_init_data *initdata;
+ struct regulator_config config = { };
+ struct regulation_constraints *constraint;
+ const char *supplyname = NULL;
+ int ret = 0;
+
+ initdata = of_get_regulator_init_data(dev, np, NULL);
+ if (!initdata) {
+ dev_err(dev, "failed to get regulator data\n");
+ return -EINVAL;
+ }
+
+ sreg = kzalloc(sizeof(*sreg), GFP_KERNEL);
+ if (!sreg)
+ return -ENOMEM;
+
+ sreg->pmic = pmic;
+ rdesc = &sreg->rdesc;
+
+ rdesc->name = initdata->constraints.name;
+ rdesc->ops = &hi6421_spmi_ldo_rops;
+ rdesc->type = REGULATOR_VOLTAGE;
+ rdesc->min_uV = initdata->constraints.min_uV;
+
+ supplyname = of_get_property(np, "supply_name", NULL);
+ if (supplyname)
+ initdata->supply_regulator = supplyname;
+
+ /* parse device tree data for regulator specific */
+ ret = hi6421_spmi_dt_parse(pdev, sreg, rdesc);
+ if (ret)
+ goto probe_end;
+
+ /* hisi regulator supports two modes */
+ constraint = &initdata->constraints;
+
+ constraint->valid_modes_mask = REGULATOR_MODE_NORMAL;
+ if (sreg->eco_mode_mask) {
+ constraint->valid_modes_mask |= REGULATOR_MODE_IDLE;
+ constraint->valid_ops_mask |= REGULATOR_CHANGE_MODE;
+ }
+
+ config.dev = &pdev->dev;
+ config.init_data = initdata;
+ config.driver_data = sreg;
+ config.of_node = pdev->dev.of_node;
+
+ /* register regulator */
+ rdev = regulator_register(rdesc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(dev, "failed to register %s\n",
+ rdesc->name);
+ ret = PTR_ERR(rdev);
+ goto probe_end;
+ }
+
+ rdev_dbg(rdev, "valid_modes_mask: 0x%x, valid_ops_mask: 0x%x\n",
+ constraint->valid_modes_mask, constraint->valid_ops_mask);
+
+ dev_set_drvdata(dev, rdev);
+probe_end:
+ if (ret)
+ kfree(sreg);
+ return ret;
+}
+
+static int hi6421_spmi_regulator_probe(struct platform_device *pdev)
+{
+ struct device *pmic_dev = pdev->dev.parent;
+ struct device_node *np = pmic_dev->of_node;
+ struct device_node *regulators, *child;
+ struct platform_device *new_pdev;
+ struct hi6421_spmi_pmic *pmic;
+ int ret;
+
+ dev_dbg(&pdev->dev, "probing hi6421v600 regulator\n");
+ /*
+ * This driver is meant to be called by hi6421-spmi-core,
+ * which should first set drvdata. If this doesn't happen, hit
+ * a warn on and return.
+ */
+ pmic = dev_get_drvdata(pmic_dev);
+ if (WARN_ON(!pmic))
+ return -ENODEV;
+
+ regulators = of_get_child_by_name(np, "regulators");
+ if (!regulators) {
+ dev_err(&pdev->dev, "regulator node not found\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Parse all LDO regulator nodes
+ */
+ for_each_child_of_node(regulators, child) {
+ dev_dbg(&pdev->dev, "adding child %pOF\n", child);
+
+ new_pdev = platform_device_alloc(child->name, -1);
+ new_pdev->dev.parent = pmic_dev;
+ new_pdev->dev.of_node = of_node_get(child);
+
+ ret = platform_device_add(new_pdev);
+ if (ret < 0) {
+ platform_device_put(new_pdev);
+ continue;
+ }
+
+ ret = hi6421_spmi_regulator_probe_ldo(new_pdev, child, pmic);
+ if (ret < 0)
+ platform_device_put(new_pdev);
+ }
+
+ of_node_put(regulators);
+
+ return 0;
+}
+
+static int hi6421_spmi_regulator_remove(struct platform_device *pdev)
+{
+ struct regulator_dev *rdev = dev_get_drvdata(&pdev->dev);
+ struct hi6421v600_regulator *sreg = rdev_get_drvdata(rdev);
+
+ regulator_unregister(rdev);
+
+ /* TODO: should i worry about that? devm_kzalloc */
+ if (rdev->desc->volt_table)
+ devm_kfree(&pdev->dev, (unsigned int *)rdev->desc->volt_table);
+
+ kfree(sreg);
+
+ return 0;
+}
+
+static const struct platform_device_id hi6421v600_regulator_table[] = {
+ { .name = "hi6421v600-regulator" },
+ {},
+};
+MODULE_DEVICE_TABLE(platform, hi6421v600_regulator_table);
+
+static struct platform_driver hi6421v600_regulator_driver = {
+ .id_table = hi6421v600_regulator_table,
+ .driver = {
+ .name = "hi6421v600-regulator",
+ },
+ .probe = hi6421_spmi_regulator_probe,
+ .remove = hi6421_spmi_regulator_remove,
+};
+module_platform_driver(hi6421v600_regulator_driver);
+
+MODULE_DESCRIPTION("Hi6421v600 regulator driver");
+MODULE_LICENSE("GPL v2");
+
diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig
index a53bad541f1a..b44e2ab6bf81 100644
--- a/drivers/spmi/Kconfig
+++ b/drivers/spmi/Kconfig
@@ -25,4 +25,13 @@ config SPMI_MSM_PMIC_ARB
This is required for communicating with Qualcomm PMICs and
other devices that have the SPMI interface.
+config SPMI_HISI3670
+ tristate "Hisilicon 3670 SPMI Controller"
+ select IRQ_DOMAIN_HIERARCHY
+ depends on HAS_IOMEM
+ help
+ If you say yes to this option, support will be included for the
+ built-in SPMI PMIC Arbiter interface on Hisilicon 3670
+ processors.
+
endif
diff --git a/drivers/spmi/Makefile b/drivers/spmi/Makefile
index 55a94cadeffe..694853e391cb 100644
--- a/drivers/spmi/Makefile
+++ b/drivers/spmi/Makefile
@@ -5,3 +5,5 @@
obj-$(CONFIG_SPMI) += spmi.o
obj-$(CONFIG_SPMI_MSM_PMIC_ARB) += spmi-pmic-arb.o
+
+obj-$(CONFIG_SPMI_HISI3670) += hisi-spmi-controller.o
diff --git a/drivers/spmi/hisi-spmi-controller.c b/drivers/spmi/hisi-spmi-controller.c
new file mode 100644
index 000000000000..153bcdb0cde4
--- /dev/null
+++ b/drivers/spmi/hisi-spmi-controller.c
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/seq_file.h>
+#include <linux/spmi.h>
+
+#define SPMI_CONTROLLER_NAME "spmi_controller"
+
+/*
+ * SPMI register addr
+ */
+#define SPMI_CHANNEL_OFFSET 0x0300
+#define SPMI_SLAVE_OFFSET 0x20
+
+#define SPMI_APB_SPMI_CMD_BASE_ADDR 0x0100
+
+#define SPMI_APB_SPMI_WDATA0_BASE_ADDR 0x0104
+#define SPMI_APB_SPMI_WDATA1_BASE_ADDR 0x0108
+#define SPMI_APB_SPMI_WDATA2_BASE_ADDR 0x010c
+#define SPMI_APB_SPMI_WDATA3_BASE_ADDR 0x0110
+
+#define SPMI_APB_SPMI_STATUS_BASE_ADDR 0x0200
+
+#define SPMI_APB_SPMI_RDATA0_BASE_ADDR 0x0204
+#define SPMI_APB_SPMI_RDATA1_BASE_ADDR 0x0208
+#define SPMI_APB_SPMI_RDATA2_BASE_ADDR 0x020c
+#define SPMI_APB_SPMI_RDATA3_BASE_ADDR 0x0210
+
+#define SPMI_PER_DATAREG_BYTE 4
+/*
+ * SPMI cmd register
+ */
+#define SPMI_APB_SPMI_CMD_EN BIT(31)
+#define SPMI_APB_SPMI_CMD_TYPE_OFFSET 24
+#define SPMI_APB_SPMI_CMD_LENGTH_OFFSET 20
+#define SPMI_APB_SPMI_CMD_SLAVEID_OFFSET 16
+#define SPMI_APB_SPMI_CMD_ADDR_OFFSET 0
+
+/* Command Opcodes */
+
+enum spmi_controller_cmd_op_code {
+ SPMI_CMD_REG_ZERO_WRITE = 0,
+ SPMI_CMD_REG_WRITE = 1,
+ SPMI_CMD_REG_READ = 2,
+ SPMI_CMD_EXT_REG_WRITE = 3,
+ SPMI_CMD_EXT_REG_READ = 4,
+ SPMI_CMD_EXT_REG_WRITE_L = 5,
+ SPMI_CMD_EXT_REG_READ_L = 6,
+ SPMI_CMD_REG_RESET = 7,
+ SPMI_CMD_REG_SLEEP = 8,
+ SPMI_CMD_REG_SHUTDOWN = 9,
+ SPMI_CMD_REG_WAKEUP = 10,
+};
+
+/*
+ * SPMI status register
+ */
+#define SPMI_APB_TRANS_DONE BIT(0)
+#define SPMI_APB_TRANS_FAIL BIT(2)
+
+/* Command register fields */
+#define SPMI_CONTROLLER_CMD_MAX_BYTE_COUNT 16
+
+/* Maximum number of support PMIC peripherals */
+#define SPMI_CONTROLLER_TIMEOUT_US 1000
+#define SPMI_CONTROLLER_MAX_TRANS_BYTES 16
+
+/*
+ * @base base address of the PMIC Arbiter core registers.
+ * @rdbase, @wrbase base address of the PMIC Arbiter read core registers.
+ * For HW-v1 these are equal to base.
+ * For HW-v2, the value is the same in eeraly probing, in order to read
+ * PMIC_ARB_CORE registers, then chnls, and obsrvr are set to
+ * PMIC_ARB_CORE_REGISTERS and PMIC_ARB_CORE_REGISTERS_OBS respectivly.
+ * @intr base address of the SPMI interrupt control registers
+ * @ppid_2_chnl_tbl lookup table f(SID, Periph-ID) -> channel num
+ * entry is only valid if corresponding bit is set in valid_ppid_bitmap.
+ * @valid_ppid_bitmap bit is set only for valid ppids.
+ * @fmt_cmd formats a command to be set into PMIC_ARBq_CHNLn_CMD
+ * @chnl_ofst calculates offset of the base of a channel reg space
+ * @ee execution environment id
+ * @irq_acc0_init_val initial value of the interrupt accumulator at probe time.
+ * Use for an HW workaround. On handling interrupts, the first accumulator
+ * register will be compared against this value, and bits which are set at
+ * boot will be ignored.
+ * @reserved_chnl entry of ppid_2_chnl_tbl that this driver should never touch.
+ * value is positive channel number or negative to mark it unused.
+ */
+struct spmi_controller_dev {
+ struct spmi_controller *controller;
+ struct device *dev;
+ void __iomem *base;
+ spinlock_t lock;
+ u32 channel;
+};
+
+static int spmi_controller_wait_for_done(struct device *dev,
+ struct spmi_controller_dev *ctrl_dev,
+ void __iomem *base, u8 sid, u16 addr)
+{
+ u32 status = 0;
+ u32 timeout = SPMI_CONTROLLER_TIMEOUT_US;
+ u32 offset;
+
+ offset = SPMI_APB_SPMI_STATUS_BASE_ADDR;
+ offset += SPMI_CHANNEL_OFFSET * ctrl_dev->channel + SPMI_SLAVE_OFFSET * sid;
+
+ while (timeout--) {
+ status = readl(base + offset);
+
+ if (status & SPMI_APB_TRANS_DONE) {
+ if (status & SPMI_APB_TRANS_FAIL) {
+ dev_err(dev, "%s: transaction failed (0x%x)\n",
+ __func__, status);
+ return -EIO;
+ }
+ dev_dbg(dev, "%s: status 0x%x\n", __func__, status);
+ return 0;
+ }
+ udelay(1);
+ }
+
+ dev_err(dev, "%s: timeout, status 0x%x\n", __func__, status);
+ return -ETIMEDOUT;
+}
+
+static int spmi_read_cmd(struct spmi_controller *ctrl,
+ u8 opc, u8 sid, u16 addr, u8 *__buf, size_t bc)
+{
+ struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
+ unsigned long flags;
+ u8 *buf = __buf;
+ u32 cmd, data;
+ int rc;
+ u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel;
+ u8 op_code, i;
+
+ if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
+ dev_err(&ctrl->dev,
+ "spmi_controller supports 1..%d bytes per trans, but:%ld requested",
+ SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
+ return -EINVAL;
+ }
+
+ /* Check the opcode */
+ if (opc == SPMI_CMD_READ) {
+ op_code = SPMI_CMD_REG_READ;
+ } else if (opc == SPMI_CMD_EXT_READ) {
+ op_code = SPMI_CMD_EXT_REG_READ;
+ } else if (opc == SPMI_CMD_EXT_READL) {
+ op_code = SPMI_CMD_EXT_REG_READ_L;
+ } else {
+ dev_err(&ctrl->dev, "invalid read cmd 0x%x", opc);
+ return -EINVAL;
+ }
+
+ cmd = SPMI_APB_SPMI_CMD_EN |
+ (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |
+ ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |
+ ((sid & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) | /* slvid */
+ ((addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET); /* slave_addr */
+
+ spin_lock_irqsave(&spmi_controller->lock, flags);
+
+ writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
+
+ rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller,
+ spmi_controller->base, sid, addr);
+ if (rc)
+ goto done;
+
+ i = 0;
+ do {
+ data = readl(spmi_controller->base + chnl_ofst + SPMI_SLAVE_OFFSET * sid + SPMI_APB_SPMI_RDATA0_BASE_ADDR + i * SPMI_PER_DATAREG_BYTE);
+ data = be32_to_cpu((__be32)data);
+ if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) {
+ memcpy(buf, &data, sizeof(data));
+ buf += sizeof(data);
+ } else {
+ memcpy(buf, &data, bc % SPMI_PER_DATAREG_BYTE);
+ buf += (bc % SPMI_PER_DATAREG_BYTE);
+ }
+ i++;
+ } while (bc > i * SPMI_PER_DATAREG_BYTE);
+
+done:
+ spin_unlock_irqrestore(&spmi_controller->lock, flags);
+ if (rc)
+ dev_err(&ctrl->dev,
+ "spmi read wait timeout op:0x%x sid:%d addr:0x%x bc:%ld\n",
+ opc, sid, addr, bc + 1);
+ else
+ dev_dbg(&ctrl->dev, "%s: id:%d addr:0x%x, read value: %*ph\n",
+ __func__, sid, addr, (int)bc, __buf);
+
+ return rc;
+}
+
+static int spmi_write_cmd(struct spmi_controller *ctrl,
+ u8 opc, u8 sid, u16 addr, const u8 *__buf, size_t bc)
+{
+ struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
+ const u8 *buf = __buf;
+ unsigned long flags;
+ u32 cmd, data;
+ int rc;
+ u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel;
+ u8 op_code, i;
+
+ if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
+ dev_err(&ctrl->dev,
+ "spmi_controller supports 1..%d bytes per trans, but:%ld requested",
+ SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
+ return -EINVAL;
+ }
+
+ /* Check the opcode */
+ if (opc == SPMI_CMD_WRITE) {
+ op_code = SPMI_CMD_REG_WRITE;
+ } else if (opc == SPMI_CMD_EXT_WRITE) {
+ op_code = SPMI_CMD_EXT_REG_WRITE;
+ } else if (opc == SPMI_CMD_EXT_WRITEL) {
+ op_code = SPMI_CMD_EXT_REG_WRITE_L;
+ } else {
+ dev_err(&ctrl->dev, "invalid write cmd 0x%x", opc);
+ return -EINVAL;
+ }
+
+ cmd = SPMI_APB_SPMI_CMD_EN |
+ (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |
+ ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |
+ ((sid & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) | /* slvid */
+ ((addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET); /* slave_addr */
+
+ /* Write data to FIFOs */
+ spin_lock_irqsave(&spmi_controller->lock, flags);
+
+ i = 0;
+ do {
+ data = 0;
+ if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) {
+ memcpy(&data, buf, sizeof(data));
+ buf += sizeof(data);
+ } else {
+ memcpy(&data, buf, bc % SPMI_PER_DATAREG_BYTE);
+ buf += (bc % SPMI_PER_DATAREG_BYTE);
+ }
+
+ writel((u32)cpu_to_be32(data),
+ spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_WDATA0_BASE_ADDR + SPMI_PER_DATAREG_BYTE * i);
+ i++;
+ } while (bc > i * SPMI_PER_DATAREG_BYTE);
+
+ /* Start the transaction */
+ writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
+
+ rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller,
+ spmi_controller->base, sid, addr);
+ spin_unlock_irqrestore(&spmi_controller->lock, flags);
+
+ if (rc)
+ dev_err(&ctrl->dev, "spmi write wait timeout op:0x%x sid:%d addr:0x%x bc:%ld\n",
+ opc, sid, addr, bc);
+ else
+ dev_dbg(&ctrl->dev, "%s: id:%d addr:0x%x, wrote value: %*ph\n",
+ __func__, sid, addr, (int)bc, __buf);
+
+ return rc;
+}
+
+static int spmi_controller_probe(struct platform_device *pdev)
+{
+ struct spmi_controller_dev *spmi_controller;
+ struct spmi_controller *ctrl;
+ struct resource *iores;
+ int ret = 0;
+
+ dev_info(&pdev->dev, "HISI SPMI probe\n");
+
+ ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*spmi_controller));
+ if (!ctrl) {
+ dev_err(&pdev->dev, "can not allocate spmi_controller data\n");
+ return -ENOMEM;
+ }
+ spmi_controller = spmi_controller_get_drvdata(ctrl);
+ spmi_controller->controller = ctrl;
+
+ /* NOTE: driver uses the static register mapping */
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iores) {
+ dev_err(&pdev->dev, "can not get resource!\n");
+ return -EINVAL;
+ }
+
+ spmi_controller->base = ioremap(iores->start, resource_size(iores));
+ if (!spmi_controller->base) {
+ dev_err(&pdev->dev, "can not remap base addr!\n");
+ return -EADDRNOTAVAIL;
+ }
+ dev_dbg(&pdev->dev, "spmi_add_controller base addr=0x%lx!\n",
+ (unsigned long)spmi_controller->base);
+
+ /* Get properties from the device tree */
+ ret = of_property_read_u32(pdev->dev.of_node, "spmi-channel",
+ &spmi_controller->channel);
+ if (ret) {
+ dev_err(&pdev->dev, "can not get channel\n");
+ return -ENODEV;
+ }
+
+ platform_set_drvdata(pdev, spmi_controller);
+ dev_set_drvdata(&ctrl->dev, spmi_controller);
+
+ spin_lock_init(&spmi_controller->lock);
+
+ ctrl->nr = spmi_controller->channel;
+ ctrl->dev.parent = pdev->dev.parent;
+ ctrl->dev.of_node = of_node_get(pdev->dev.of_node);
+
+ /* Callbacks */
+ ctrl->read_cmd = spmi_read_cmd;
+ ctrl->write_cmd = spmi_write_cmd;
+
+ ret = spmi_controller_add(ctrl);
+ if (ret)
+ goto err_add_controller;
+
+ dev_info(&pdev->dev, "spmi_add_controller initialized\n");
+ return 0;
+
+err_add_controller:
+ dev_err(&pdev->dev, "spmi_add_controller failed!\n");
+ platform_set_drvdata(pdev, NULL);
+ return ret;
+}
+
+static int spmi_del_controller(struct platform_device *pdev)
+{
+ struct spmi_controller *ctrl = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+ spmi_controller_remove(ctrl);
+ return 0;
+}
+
+static const struct of_device_id spmi_controller_match_table[] = {
+ { .compatible = "hisilicon,spmi-controller",
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, spmi_controller_match_table);
+
+static struct platform_driver spmi_controller_driver = {
+ .probe = spmi_controller_probe,
+ .remove = spmi_del_controller,
+ .driver = {
+ .name = SPMI_CONTROLLER_NAME,
+ .of_match_table = spmi_controller_match_table,
+ },
+};
+
+static int __init spmi_controller_init(void)
+{
+ return platform_driver_register(&spmi_controller_driver);
+}
+postcore_initcall(spmi_controller_init);
+
+static void __exit spmi_controller_exit(void)
+{
+ platform_driver_unregister(&spmi_controller_driver);
+}
+module_exit(spmi_controller_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION("1.0");
+MODULE_ALIAS("platform:spmi_controlller");
diff --git a/drivers/spmi/spmi.c b/drivers/spmi/spmi.c
index c16b60f645a4..253340e10dab 100644
--- a/drivers/spmi/spmi.c
+++ b/drivers/spmi/spmi.c
@@ -23,6 +23,7 @@ static DEFINE_IDA(ctrl_ida);
static void spmi_dev_release(struct device *dev)
{
struct spmi_device *sdev = to_spmi_device(dev);
+
kfree(sdev);
}
@@ -33,6 +34,7 @@ static const struct device_type spmi_dev_type = {
static void spmi_ctrl_release(struct device *dev)
{
struct spmi_controller *ctrl = to_spmi_controller(dev);
+
ida_simple_remove(&ctrl_ida, ctrl->nr);
kfree(ctrl);
}
@@ -487,7 +489,7 @@ static void of_spmi_register_devices(struct spmi_controller *ctrl)
continue;
sdev->dev.of_node = node;
- sdev->usid = (u8) reg[0];
+ sdev->usid = (u8)reg[0];
err = spmi_device_add(sdev);
if (err) {
@@ -531,6 +533,7 @@ EXPORT_SYMBOL_GPL(spmi_controller_add);
static int spmi_ctrl_remove_device(struct device *dev, void *data)
{
struct spmi_device *spmidev = to_spmi_device(dev);
+
if (dev->type == &spmi_dev_type)
spmi_device_remove(spmidev);
return 0;
@@ -545,13 +548,10 @@ static int spmi_ctrl_remove_device(struct device *dev, void *data)
*/
void spmi_controller_remove(struct spmi_controller *ctrl)
{
- int dummy;
-
if (!ctrl)
return;
- dummy = device_for_each_child(&ctrl->dev, NULL,
- spmi_ctrl_remove_device);
+ device_for_each_child(&ctrl->dev, NULL, spmi_ctrl_remove_device);
device_del(&ctrl->dev);
}
EXPORT_SYMBOL_GPL(spmi_controller_remove);
diff --git a/include/linux/mfd/hi6421-spmi-pmic.h b/include/linux/mfd/hi6421-spmi-pmic.h
new file mode 100644
index 000000000000..aeff96c4a37e
--- /dev/null
+++ b/include/linux/mfd/hi6421-spmi-pmic.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Header file for device driver Hi6421 PMIC
+ *
+ * Copyright (c) 2013 Linaro Ltd.
+ * Copyright (C) 2011 Hisilicon.
+ *
+ * Guodong Xu <guodong.xu@xxxxxxxxxx>
+ */
+
+#ifndef __HISI_PMIC_H
+#define __HISI_PMIC_H
+
+#include <linux/irqdomain.h>
+
+#define HISI_REGS_ENA_PROTECT_TIME (0) /* in microseconds */
+#define HISI_ECO_MODE_ENABLE (1)
+#define HISI_ECO_MODE_DISABLE (0)
+
+struct hi6421_spmi_irq_mask_info {
+ int start_addr;
+ int array;
+};
+
+struct hi6421_spmi_irq_info {
+ int start_addr;
+ int array;
+};
+
+struct hi6421_spmi_pmic {
+ struct resource *res;
+ struct device *dev;
+ void __iomem *regs;
+ spinlock_t lock;
+ struct irq_domain *domain;
+ int irq;
+ int gpio;
+ unsigned int *irqs;
+ int irqnum;
+ int irqarray;
+
+ struct hi6421_spmi_irq_mask_info irq_mask_addr;
+ struct hi6421_spmi_irq_info irq_addr;
+};
+
+u32 hi6421_spmi_pmic_read(struct hi6421_spmi_pmic *pmic, int reg);
+void hi6421_spmi_pmic_write(struct hi6421_spmi_pmic *pmic, int reg, u32 val);
+void hi6421_spmi_pmic_rmw(struct hi6421_spmi_pmic *pmic, int reg, u32 mask, u32 bits);
+
+enum hi6421_spmi_pmic_irq_list {
+ OTMP = 0,
+ VBUS_CONNECT,
+ VBUS_DISCONNECT,
+ ALARMON_R,
+ HOLD_6S,
+ HOLD_1S,
+ POWERKEY_UP,
+ POWERKEY_DOWN,
+ OCP_SCP_R,
+ COUL_R,
+ SIM0_HPD_R,
+ SIM0_HPD_F,
+ SIM1_HPD_R,
+ SIM1_HPD_F,
+ PMIC_IRQ_LIST_MAX,
+};
+#endif /* __HISI_PMIC_H */
Thanks,
Mauro