[PATCH 09/14] mips: bmips: bcm3368: include and use dt-bindings

[Álvaro Fernández Rojas]

Now that there are proper device tree bindings we can start using them.

Signed-off-by: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
---
 arch/mips/boot/dts/brcm/bcm3368.dtsi | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/mips/boot/dts/brcm/bcm3368.dtsi b/arch/mips/boot/dts/brcm/bcm3368.dtsi
index 69cbef472377..63d844601718 100644
--- a/arch/mips/boot/dts/brcm/bcm3368.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm3368.dtsi
@@ -1,4 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
+
+#include "dt-bindings/clock/bcm3368-clock.h"
+#include "dt-bindings/interrupt-controller/bcm3368-interrupt-controller.h"
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -86,7 +90,7 @@ uart0: serial@fff8c100 {
 			reg = <0xfff8c100 0x18>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <2>;
+			interrupts = <BCM3368_IRQ_UART0>;
 
 			clocks = <&periph_clk>;
 			clock-names = "refclk";
@@ -99,7 +103,7 @@ uart1: serial@fff8c120 {
 			reg = <0xfff8c120 0x18>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <3>;
+			interrupts = <BCM3368_IRQ_UART1>;
 
 			clocks = <&periph_clk>;
 			clock-names = "refclk";
-- 
2.28.0