[PATCH 02/44] staging: spmi: hisi-spmi-controller: coding style fixup

From: Mauro Carvalho Chehab
Date: Wed Aug 12 2020 - 11:59:41 EST

Next message: Mauro Carvalho Chehab: "[PATCH 07/44] staging: spmi: hisi-spmi-controller: add debug when values are read/write"
Previous message: Mauro Carvalho Chehab: "[PATCH 12/44] staging: mfd: hi6421-spmi-pmic: get rid of unused code"
In reply to: Mauro Carvalho Chehab: "[PATCH 12/44] staging: mfd: hi6421-spmi-pmic: get rid of unused code"
Next in thread: Mauro Carvalho Chehab: "[PATCH 07/44] staging: spmi: hisi-spmi-controller: add debug when values are read/write"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

In order to prepare for upstream, fix most coding style issues.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
---
.../staging/hikey9xx/hisi-spmi-controller.c | 179 ++++++++----------
1 file changed, 82 insertions(+), 97 deletions(-)

diff --git a/drivers/staging/hikey9xx/hisi-spmi-controller.c b/drivers/staging/hikey9xx/hisi-spmi-controller.c
index 987526c8b49f..3af0bd1b379f 100644
--- a/drivers/staging/hikey9xx/hisi-spmi-controller.c
+++ b/drivers/staging/hikey9xx/hisi-spmi-controller.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0

#include <linux/delay.h>
#include <linux/err.h>
@@ -21,7 +22,7 @@
#define SPMI_SLAVE_OFFSET 0x20

#define SPMI_APB_SPMI_CMD_BASE_ADDR 0x0100
-/*lint -e750 -esym(750,*)*/
+
#define SPMI_APB_SPMI_WDATA0_BASE_ADDR 0x0104
#define SPMI_APB_SPMI_WDATA1_BASE_ADDR 0x0108
#define SPMI_APB_SPMI_WDATA2_BASE_ADDR 0x010c
@@ -33,25 +34,25 @@
#define SPMI_APB_SPMI_RDATA1_BASE_ADDR 0x0208
#define SPMI_APB_SPMI_RDATA2_BASE_ADDR 0x020c
#define SPMI_APB_SPMI_RDATA3_BASE_ADDR 0x0210
-/*lint +e750 -esym(750,*)*/

#define SPMI_PER_DATAREG_BYTE 4
/*
* SPMI cmd register
*/
-#define SPMI_APB_SPMI_CMD_EN (1 << 31)
+#define SPMI_APB_SPMI_CMD_EN BIT(31)
#define SPMI_APB_SPMI_CMD_TYPE_OFFSET 24
#define SPMI_APB_SPMI_CMD_LENGTH_OFFSET 20
#define SPMI_APB_SPMI_CMD_SLAVEID_OFFSET 16
#define SPMI_APB_SPMI_CMD_ADDR_OFFSET 0

-#define Tranverse32(X) ((((u32)(X) & 0xff000000) >> 24) | \
- (((u32)(X) & 0x00ff0000) >> 8) | \
- (((u32)(X) & 0x0000ff00) << 8) | \
- (((u32)(X) & 0x000000ff) << 24))
+#define bswap_32(X) \
+ ((((u32)(X) & 0xff000000) >> 24) | \
+ (((u32)(X) & 0x00ff0000) >> 8) | \
+ (((u32)(X) & 0x0000ff00) << 8) | \
+ (((u32)(X) & 0x000000ff) << 24))

/* Command Opcodes */
-/*lint -e749 -esym(749,*)*/
+
enum spmi_controller_cmd_op_code {
SPMI_CMD_REG_ZERO_WRITE = 0,
SPMI_CMD_REG_WRITE = 1,
@@ -65,13 +66,12 @@ enum spmi_controller_cmd_op_code {
SPMI_CMD_REG_SHUTDOWN = 9,
SPMI_CMD_REG_WAKEUP = 10,
};
-/*lint +e749 -esym(749,*)*/

/*
* SPMI status register
*/
-#define SPMI_APB_TRANS_DONE (1 << 0)
-#define SPMI_APB_TRANS_FAIL (1 << 2)
+#define SPMI_APB_TRANS_DONE BIT(0)
+#define SPMI_APB_TRANS_FAIL BIT(2)

/* Command register fields */
#define SPMI_CONTROLLER_CMD_MAX_BYTE_COUNT 16
@@ -80,16 +80,6 @@ enum spmi_controller_cmd_op_code {
#define SPMI_CONTROLLER_TIMEOUT_US 1000
#define SPMI_CONTROLLER_MAX_TRANS_BYTES (16)

-#define SPMI_WRITEL( dev, reg, addr ) \
- do { \
- writel( ( reg ), ( addr ) ); \
- } while (0)
-
-#define SPMI_READL( dev, reg, addr ) \
- do { \
- reg = readl( addr ); \
- } while (0)
-
/*
* @base base address of the PMIC Arbiter core registers.
* @rdbase, @wrbase base address of the PMIC Arbiter read core registers.
@@ -120,7 +110,7 @@ struct spmi_controller_dev {
};

static int spmi_controller_wait_for_done(struct spmi_controller_dev *ctrl_dev,
- void __iomem *base, u8 sid, u16 addr)
+ void __iomem *base, u8 sid, u16 addr)
{
u32 status = 0;
u32 timeout = SPMI_CONTROLLER_TIMEOUT_US;
@@ -128,7 +118,7 @@ static int spmi_controller_wait_for_done(struct spmi_controller_dev *ctrl_dev,
+ SPMI_SLAVE_OFFSET * sid;

while (timeout--) {
- SPMI_READL(ctrl_dev->dev, status, base + offset);/*lint !e732 */
+ status = readl(base + offset);

if (status & SPMI_APB_TRANS_DONE) {
if (status & SPMI_APB_TRANS_FAIL) {
@@ -139,23 +129,23 @@ static int spmi_controller_wait_for_done(struct spmi_controller_dev *ctrl_dev,
}
return 0;
}
- udelay(1);/*lint !e778 !e774 !e747*/
+ udelay(1);
}

dev_err(ctrl_dev->dev,
"%s: timeout, status 0x%x\n",
__func__, status);
- return -ETIMEDOUT;/*lint !e438*/
-}/*lint !e715 !e529*/
+ return -ETIMEDOUT;
+}

static int spmi_read_cmd(struct spmi_controller *ctrl,
- u8 opc, u8 sid, u16 addr, u8 *buf, size_t bc)
+ u8 opc, u8 sid, u16 addr, u8 *buf, size_t bc)
{
struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
unsigned long flags;
u32 cmd, data;
int rc;
- u32 chnl_ofst = SPMI_CHANNEL_OFFSET*spmi_controller->channel;
+ u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel;
u8 op_code, i;

if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
@@ -166,27 +156,26 @@ static int spmi_read_cmd(struct spmi_controller *ctrl,
}

/* Check the opcode */
- if (SPMI_CMD_READ == opc)
+ if (opc == SPMI_CMD_READ) {
op_code = SPMI_CMD_REG_READ;
- else if (SPMI_CMD_EXT_READ == opc)
+ } else if (opc == SPMI_CMD_EXT_READ) {
op_code = SPMI_CMD_EXT_REG_READ;
- else if (SPMI_CMD_EXT_READL == opc)
+ } else if (opc == SPMI_CMD_EXT_READL) {
op_code = SPMI_CMD_EXT_REG_READ_L;
- else {
+ } else {
dev_err(spmi_controller->dev, "invalid read cmd 0x%x", opc);
return -EINVAL;
}

- cmd = SPMI_APB_SPMI_CMD_EN |/*lint !e648 !e701 */ /* cmd_en */
- (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |/*lint !e648 !e701 */ /* cmd_type */
- ((bc-1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |/*lint !e648 !e701 */ /* byte_cnt */
- ((sid & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) | /* slvid */
- ((addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET); /* slave_addr */
+ cmd = SPMI_APB_SPMI_CMD_EN |
+ (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |
+ ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |
+ ((sid & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) | /* slvid */
+ ((addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET); /* slave_addr */

- spin_lock_irqsave(&spmi_controller->lock, flags);/*lint !e550 */
-
- SPMI_WRITEL(spmi_controller->dev, cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
+ spin_lock_irqsave(&spmi_controller->lock, flags);

+ writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);

rc = spmi_controller_wait_for_done(spmi_controller, spmi_controller->base, sid, addr);
if (rc)
@@ -194,39 +183,37 @@ static int spmi_read_cmd(struct spmi_controller *ctrl,

i = 0;
do {
- SPMI_READL(spmi_controller->dev, data, spmi_controller->base + chnl_ofst + SPMI_SLAVE_OFFSET*sid + SPMI_APB_SPMI_RDATA0_BASE_ADDR + i*SPMI_PER_DATAREG_BYTE);/*lint !e732 */
- data = Tranverse32(data);
- if ((bc - i*SPMI_PER_DATAREG_BYTE ) >> 2) {/*lint !e702 */
+ data = readl(spmi_controller->base + chnl_ofst + SPMI_SLAVE_OFFSET * sid + SPMI_APB_SPMI_RDATA0_BASE_ADDR + i * SPMI_PER_DATAREG_BYTE);
+ data = bswap_32(data);
+ if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) {
memcpy(buf, &data, sizeof(data));
buf += sizeof(data);
} else {
- memcpy(buf, &data, bc%SPMI_PER_DATAREG_BYTE);/*lint !e747 */
- buf += (bc%SPMI_PER_DATAREG_BYTE);
+ memcpy(buf, &data, bc % SPMI_PER_DATAREG_BYTE);
+ buf += (bc % SPMI_PER_DATAREG_BYTE);
}
i++;
- } while (bc > i*SPMI_PER_DATAREG_BYTE);
+ } while (bc > i * SPMI_PER_DATAREG_BYTE);

done:
spin_unlock_irqrestore(&spmi_controller->lock, flags);
if (rc)
dev_err(spmi_controller->dev, "spmi read wait timeout op:0x%x sid:%d addr:0x%x bc:%ld\n",
- opc, sid, addr, bc + 1);
+ opc, sid, addr, bc + 1);
return rc;
-}/*lint !e550 !e529*/
+}

-/*lint -e438 -esym(438,*)*/
static int spmi_write_cmd(struct spmi_controller *ctrl,
- u8 opc, u8 sid, u16 addr, const u8 *buf, size_t bc)
+ u8 opc, u8 sid, u16 addr, const u8 *buf, size_t bc)
{
struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
unsigned long flags;
u32 cmd;
u32 data = 0;
int rc;
- u32 chnl_ofst = SPMI_CHANNEL_OFFSET*spmi_controller->channel;
+ u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel;
u8 op_code, i;

-
if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
dev_err(spmi_controller->dev
, "spmi_controller supports 1..%d bytes per trans, but:%ld requested"
@@ -235,55 +222,55 @@ static int spmi_write_cmd(struct spmi_controller *ctrl,
}

/* Check the opcode */
- if (SPMI_CMD_WRITE == opc)
+ if (opc == SPMI_CMD_WRITE) {
op_code = SPMI_CMD_REG_WRITE;
- else if (SPMI_CMD_EXT_WRITE == opc)
+ } else if (opc == SPMI_CMD_EXT_WRITE) {
op_code = SPMI_CMD_EXT_REG_WRITE;
- else if (SPMI_CMD_EXT_WRITEL == opc)
+ } else if (opc == SPMI_CMD_EXT_WRITEL) {
op_code = SPMI_CMD_EXT_REG_WRITE_L;
- else {
+ } else {
dev_err(spmi_controller->dev, "invalid write cmd 0x%x", opc);
return -EINVAL;
}

- cmd = SPMI_APB_SPMI_CMD_EN |/*lint !e648 !e701 */ /* cmd_en */
- (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |/*lint !e648 !e701 */ /* cmd_type */
- ((bc-1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |/*lint !e648 !e701 */ /* byte_cnt */
- ((sid & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) | /* slvid */
- ((addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET); /* slave_addr */
+ cmd = SPMI_APB_SPMI_CMD_EN |
+ (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |
+ ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |
+ ((sid & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) | /* slvid */
+ ((addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET); /* slave_addr */

/* Write data to FIFOs */
- spin_lock_irqsave(&spmi_controller->lock, flags);/*lint !e550 */
+ spin_lock_irqsave(&spmi_controller->lock, flags);

i = 0;
do {
memset(&data, 0, sizeof(data));
- if ((bc - i*SPMI_PER_DATAREG_BYTE ) >> 2) {/*lint !e702 */
+ if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) {
memcpy(&data, buf, sizeof(data));
- buf +=sizeof(data);
+ buf += sizeof(data);
} else {
- memcpy(&data, buf, bc%SPMI_PER_DATAREG_BYTE);/*lint !e747 */
- buf +=(bc%SPMI_PER_DATAREG_BYTE);
+ memcpy(&data, buf, bc % SPMI_PER_DATAREG_BYTE);
+ buf += (bc % SPMI_PER_DATAREG_BYTE);
}

- data = Tranverse32(data);
- SPMI_WRITEL(spmi_controller->dev, data, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_WDATA0_BASE_ADDR+SPMI_PER_DATAREG_BYTE*i);
+ data = bswap_32(data);
+ writel(data, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_WDATA0_BASE_ADDR + SPMI_PER_DATAREG_BYTE * i);
i++;
- } while (bc > i*SPMI_PER_DATAREG_BYTE);
+ } while (bc > i * SPMI_PER_DATAREG_BYTE);

/* Start the transaction */
- SPMI_WRITEL(spmi_controller->dev, cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
+ writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);

rc = spmi_controller_wait_for_done(spmi_controller, spmi_controller->base, sid, addr);
spin_unlock_irqrestore(&spmi_controller->lock, flags);

if (rc)
dev_err(spmi_controller->dev, "spmi write wait timeout op:0x%x sid:%d addr:0x%x bc:%ld\n",
- opc, sid, addr, bc);
+ opc, sid, addr, bc);

return rc;
-}/*lint !e438 !e550 !e529*/
-/*lint +e438 -esym(438,*)*/
+}
+
static int spmi_controller_probe(struct platform_device *pdev)
{
struct spmi_controller_dev *spmi_controller;
@@ -291,11 +278,11 @@ static int spmi_controller_probe(struct platform_device *pdev)
struct resource *iores;
int ret = 0;

- printk(KERN_INFO "HISI SPMI probe\n");
+ dev_info(&pdev->dev, "HISI SPMI probe\n");
ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*spmi_controller));
if (!ctrl) {
dev_err(&pdev->dev, "can not allocate spmi_controller data\n");
- return -ENOMEM; /*lint !e429*/
+ return -ENOMEM;
}
spmi_controller = spmi_controller_get_drvdata(ctrl);
spmi_controller->controller = ctrl;
@@ -303,23 +290,24 @@ static int spmi_controller_probe(struct platform_device *pdev)
/* NOTE: driver uses the static register mapping */
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!iores) {
- dev_err(&pdev->dev, "can not get resource! \n");
- return -EINVAL; /*lint !e429*/
+ dev_err(&pdev->dev, "can not get resource!\n");
+ return -EINVAL;
}

spmi_controller->base = ioremap(iores->start, resource_size(iores));
if (!spmi_controller->base) {
- dev_err(&pdev->dev, "can not remap base addr! \n");
- return -EADDRNOTAVAIL; /*lint !e429*/
+ dev_err(&pdev->dev, "can not remap base addr!\n");
+ return -EADDRNOTAVAIL;
}
- dev_dbg(&pdev->dev, "spmi_add_controller base addr=0x%lx!\n", (long unsigned int)spmi_controller->base);/*lint !e774*/
+ dev_dbg(&pdev->dev, "spmi_add_controller base addr=0x%lx!\n",
+ (unsigned long)spmi_controller->base);

/* Get properties from the device tree */
ret = of_property_read_u32(pdev->dev.of_node, "spmi-channel",
- &spmi_controller->channel);/*lint !e838*/
+ &spmi_controller->channel);
if (ret) {
- dev_err(&pdev->dev, "can not get chanel \n");
- return -ENODEV; /*lint !e429*/
+ dev_err(&pdev->dev, "can not get chanel\n");
+ return -ENODEV;
}

platform_set_drvdata(pdev, spmi_controller);
@@ -342,7 +330,7 @@ static int spmi_controller_probe(struct platform_device *pdev)
}
err_add_controller:
platform_set_drvdata(pdev, NULL);
- return ret; /*lint !e429*/
+ return ret;
}

static int spmi_del_controller(struct platform_device *pdev)
@@ -354,10 +342,10 @@ static int spmi_del_controller(struct platform_device *pdev)
return 0;
}

-static struct of_device_id spmi_controller_match_table[] = {
+static const struct of_device_id spmi_controller_match_table[] = {
{ .compatible = "hisilicon,spmi-controller",
- },/*lint !e785*/
- {}/*lint !e785*/
+ },
+ {}
};

static struct platform_driver spmi_controller_driver = {
@@ -365,14 +353,14 @@ static struct platform_driver spmi_controller_driver = {
.remove = spmi_del_controller,
.driver = {
.name = SPMI_CONTROLLER_NAME,
- .owner = THIS_MODULE,/*lint !e64*/
+ .owner = THIS_MODULE,
.of_match_table = spmi_controller_match_table,
- },/*lint !e785*/
-};/*lint !e785*/
-/*lint -e528 -esym(528,*)*/
+ },
+};
+
static int __init spmi_controller_init(void)
{
- return platform_driver_register(&spmi_controller_driver);/*lint !e64*/
+ return platform_driver_register(&spmi_controller_driver);
}
postcore_initcall(spmi_controller_init);

@@ -381,10 +369,7 @@ static void __exit spmi_controller_exit(void)
platform_driver_unregister(&spmi_controller_driver);
}
module_exit(spmi_controller_exit);
-/*lint -e753 -esym(753,*)*/
+
MODULE_LICENSE("GPL v2");
-MODULE_VERSION("1.0");/*lint !e785 !e64 !e528*/
+MODULE_VERSION("1.0");
MODULE_ALIAS("platform:spmi_controlller");
-/*lint -e753 +esym(753,*)*/
-/*lint -e528 +esym(528,*)*/
-
--
2.26.2

Next message: Mauro Carvalho Chehab: "[PATCH 07/44] staging: spmi: hisi-spmi-controller: add debug when values are read/write"
Previous message: Mauro Carvalho Chehab: "[PATCH 12/44] staging: mfd: hi6421-spmi-pmic: get rid of unused code"
In reply to: Mauro Carvalho Chehab: "[PATCH 12/44] staging: mfd: hi6421-spmi-pmic: get rid of unused code"
Next in thread: Mauro Carvalho Chehab: "[PATCH 07/44] staging: spmi: hisi-spmi-controller: add debug when values are read/write"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]