[PATCH 07/11] extcon: ptn5150: Lower the noisiness of probe

[Krzysztof Kozlowski]

The ptn5150 driver always prints device type on probe but as raw hex,
without any translation to meaningful description.  This is useful only
for board bring up time so lower the verbosity to debug.

Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
 drivers/extcon/extcon-ptn5150.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/extcon/extcon-ptn5150.c b/drivers/extcon/extcon-ptn5150.c
index 3b99ad41b06e..a57fef384a29 100644
--- a/drivers/extcon/extcon-ptn5150.c
+++ b/drivers/extcon/extcon-ptn5150.c
@@ -199,8 +199,8 @@ static int ptn5150_init_dev_type(struct ptn5150_info *info)
 	version_id = ((reg_data & PTN5150_REG_DEVICE_ID_VERSION_MASK) >>
 				PTN5150_REG_DEVICE_ID_VERSION_SHIFT);
 
-	dev_info(info->dev, "Device type: version: 0x%x, vendor: 0x%x\n",
-			    version_id, vendor_id);
+	dev_dbg(info->dev, "Device type: version: 0x%x, vendor: 0x%x\n",
+		version_id, vendor_id);
 
 	/* Clear any existing interrupts */
 	ret = regmap_read(info->regmap, PTN5150_REG_INT_STATUS, &reg_data);
-- 
2.17.1