Re: [RESEND v7, PATCH 1/7] dt-bindings: mediatek: add rdma_fifo_size description for mt8183 display

[Rob Herring]

On Sat, Aug 08, 2020 at 10:53:45AM +0800, Yongqiang Niu wrote:
> rdma fifo size may be different even in same SOC, add this
> property to the corresponding rdma
> 
> Change-Id: I67635ec7f3f59cf4cbc7737285e5e28ff0ab71c9
> Signed-off-by: Yongqiang Niu <yongqiang.niu@xxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/display/mediatek/mediatek,disp.txt | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> index b91e709..e6bbe32 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> @@ -66,6 +66,11 @@ Required properties (DMA function blocks):
>    argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
>    for details.
>  
> +Optional properties (RDMA function blocks):
> +- mediatek,rdma_fifo_size: rdma fifo size may be different even in same SOC, add this

mediatek,rdma-fifo-size

What's the range/set of valid values?

> +  property to the corresponding rdma
> +  the value is the Max value which defined in hardware data sheet.
> +
>  Examples:
>  
>  mmsys: clock-controller@14000000 {
> @@ -207,3 +212,12 @@ od@14023000 {
>  	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
>  	clocks = <&mmsys CLK_MM_DISP_OD>;
>  };
> +
> +rdma1: rdma@1400c000 {

Does a new property really need a whole new example?

> +	compatible = "mediatek,mt8183-disp-rdma";
> +	reg = <0 0x1400c000 0 0x1000>;
> +	interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
> +	power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> +	clocks = <&mmsys CLK_MM_DISP_RDMA1>;
> +	mediatek,rdma_fifo_size = <2048>;
> +};
> -- 
> 1.8.1.1.dirty