Re: [PATCH v2 1/3] usb: dwc3: core: Host wake up support from system suspend

[Matthias Kaehlcke]

On Thu, Jul 09, 2020 at 12:40:15AM +0530, Sandeep Maheswaram wrote:
> Avoiding phy powerdown in host mode so that it can be wake up by devices.
> Added need_phy_for_wakeup flag to distinugush resume path and hs_phy_flags
> to check connection status and set phy mode and  configure interrupts.
> 
> Signed-off-by: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
> ---
>  drivers/usb/dwc3/core.c | 47 ++++++++++++++++++++++++++++++++++++++++-------
>  drivers/usb/dwc3/core.h |  2 ++
>  2 files changed, 42 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 25c686a7..eb7c225 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -31,12 +31,14 @@
>  #include <linux/usb/gadget.h>
>  #include <linux/usb/of.h>
>  #include <linux/usb/otg.h>
> +#include <linux/usb/hcd.h>
>  
>  #include "core.h"
>  #include "gadget.h"
>  #include "io.h"
>  
>  #include "debug.h"
> +#include "../host/xhci.h"
>  
>  #define DWC3_DEFAULT_AUTOSUSPEND_DELAY	5000 /* ms */
>  
> @@ -1627,10 +1629,36 @@ static int dwc3_core_init_for_resume(struct dwc3 *dwc)
>  	return ret;
>  }
>  
> +static void dwc3_set_phy_speed_flags(struct dwc3 *dwc)
> +{
> +
> +	int i, num_ports;
> +	u32 reg;
> +	struct usb_hcd	*hcd = platform_get_drvdata(dwc->xhci);
> +	struct xhci_hcd	*xhci_hcd = hcd_to_xhci(hcd);
> +
> +	dwc->hs_phy_flags &= ~(PHY_MODE_USB_HOST_HS | PHY_MODE_USB_HOST_LS);
> +
> +	reg = readl(&xhci_hcd->cap_regs->hcs_params1);
> +
> +	num_ports = HCS_MAX_PORTS(reg);
> +	for (i = 0; i < num_ports; i++) {
> +		reg = readl(&xhci_hcd->op_regs->port_status_base + i * 0x04);
> +		if (reg & PORT_PE) {
> +			if (DEV_HIGHSPEED(reg) || DEV_FULLSPEED(reg))
> +				dwc->hs_phy_flags |= PHY_MODE_USB_HOST_HS;
> +			else if (DEV_LOWSPEED(reg))
> +				dwc->hs_phy_flags |= PHY_MODE_USB_HOST_LS;
> +		}
> +	}
> +	phy_set_mode(dwc->usb2_generic_phy, dwc->hs_phy_flags);
> +}
> +
>  static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
>  {
>  	unsigned long	flags;
>  	u32 reg;
> +	struct usb_hcd  *hcd = platform_get_drvdata(dwc->xhci);
>  
>  	switch (dwc->current_dr_role) {
>  	case DWC3_GCTL_PRTCAP_DEVICE:
> @@ -1643,9 +1671,12 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
>  		dwc3_core_exit(dwc);
>  		break;
>  	case DWC3_GCTL_PRTCAP_HOST:
> +		dwc3_set_phy_speed_flags(dwc);
>  		if (!PMSG_IS_AUTO(msg)) {
> -			dwc3_core_exit(dwc);
> -			break;
> +			if (usb_wakeup_enabled_descendants(hcd->self.root_hub))
> +				dwc->need_phy_for_wakeup = true;
> +			else
> +				dwc->need_phy_for_wakeup = false;
>  		}
>  
>  		/* Let controller to suspend HSPHY before PHY driver suspends */
> @@ -1705,11 +1736,13 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
>  		break;
>  	case DWC3_GCTL_PRTCAP_HOST:
>  		if (!PMSG_IS_AUTO(msg)) {
> -			ret = dwc3_core_init_for_resume(dwc);
> -			if (ret)
> -				return ret;
> -			dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
> -			break;
> +			if (!dwc->need_phy_for_wakeup) {
> +				ret = dwc3_core_init_for_resume(dwc);
> +				if (ret)
> +					return ret;
> +				dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
> +				break;
> +			}
>  		}
>  		/* Restore GUSB2PHYCFG bits that were modified in suspend */
>  		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 013f42a..5367d510e 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -1094,6 +1094,8 @@ struct dwc3 {
>  	struct phy		*usb3_generic_phy;
>  
>  	bool			phys_ready;
> +	bool                    need_phy_for_wakeup;
> +	unsigned int            hs_phy_flags;
>  
>  	struct ulpi		*ulpi;
>  	bool			ulpi_ready;

Should this include a check for the 'wakeup-source' DT attribute as in
xhci-mtk.c, to make wakeup support optional?