[PATCH v2 0/3] drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel

[Guido Günther]

The panel uses a Focaltech FT8006p, the touch part is handled by the already
existing edt-ft5x06. It can be found in e.g. the Librem 5.

Changes from v1:
- Due to review comments by Sam Ravnborg, thanks!
  https://lore.kernel.org/dri-devel/20200815083917.GA993113@xxxxxxxxxxxx/
  - Don't preserve newlines with '|' in description
  - Use reset-gpios and backlight from panel-common.yaml
  - Reindent example
  https://lore.kernel.org/dri-devel/20200815093226.GB993113@xxxxxxxxxxxx/
  - Drop unused includes
  - Use dev_* instead of DRM_* for printing
  - Turn off regulators in reverse order from enable
  - Silence errors in mantix_{shutdown,remove}
  - Drop duplicate mipi_dsi_dcs_enter_sleep_mode()
  https://lore.kernel.org/dri-devel/20200815100230.GA1002374@xxxxxxxxxxxx/
  - Use dev_err_probe()
- Add delays when turning off panel as suggested by the data sheet

This series is against next-20200814.

Guido Günther (3):
  dt-bindings: vendor-prefixes: Add mantix vendor prefix
  dt-bindings: Add Mantix MLAF057WE51-X panel bindings
  drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel

 .../display/panel/mantix,mlaf057we51-x.yaml   |  70 ++++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 MAINTAINERS                                   |   7 +
 drivers/gpu/drm/panel/Kconfig                 |  11 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-mantix-mlaf057we51.c  | 328 ++++++++++++++++++
 6 files changed, 419 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
 create mode 100644 drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c

-- 
2.26.2