Re: [PATCH v1 1/2] dt-bindings: power: Add the bq256xx dt bindings

[Rob Herring]

On Mon, 17 Aug 2020 14:17:22 -0500, Ricardo Rivera-Matos wrote:
> Add the bindings for the bq256xx series of battery charging ICs.
> 
> Datasheets:
> - https://www.ti.com/lit/ds/symlink/bq25600.pdf
> - https://www.ti.com/lit/ds/symlink/bq25601.pdf
> - https://www.ti.com/lit/ds/symlink/bq25600d.pdf
> - https://www.ti.com/lit/ds/symlink/bq25601d.pdf
> - https://www.ti.com/lit/ds/symlink/bq25611d.pdf
> - https://www.ti.com/lit/ds/symlink/bq25618.pdf
> - https://www.ti.com/lit/ds/symlink/bq25619.pdf
> 
> Signed-off-by: Ricardo Rivera-Matos <r-rivera-matos@xxxxxx>
> ---
>  .../bindings/power/supply/bq256xx.yaml        | 99 +++++++++++++++++++
>  1 file changed, 99 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/supply/bq256xx.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/power/supply/bq256xx.example.dt.yaml: battery: 'termination-current-microamp' does not match any of the regexes: '^ocv-capacity-table-[0-9]+$', 'pinctrl-[0-9]+'


See https://patchwork.ozlabs.org/patch/1346479

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.