Re: [PATCH v1 1/2] dt-bindings: power: Add the bq256xx dt bindings

[Dan Murphy]

Rob

On 8/18/20 11:43 AM, Rob Herring wrote:
> On Mon, Aug 17, 2020 at 02:17:22PM -0500, Ricardo Rivera-Matos wrote:
> > Add the bindings for the bq256xx series of battery charging ICs.
> >
> > Datasheets:
> > - https://www.ti.com/lit/ds/symlink/bq25600.pdf
> > - https://www.ti.com/lit/ds/symlink/bq25601.pdf
> > - https://www.ti.com/lit/ds/symlink/bq25600d.pdf
> > - https://www.ti.com/lit/ds/symlink/bq25601d.pdf
> > - https://www.ti.com/lit/ds/symlink/bq25611d.pdf
> > - https://www.ti.com/lit/ds/symlink/bq25618.pdf
> > - https://www.ti.com/lit/ds/symlink/bq25619.pdf
> >
> > Signed-off-by: Ricardo Rivera-Matos <r-rivera-matos@xxxxxx>
> > ---
> >   .../bindings/power/supply/bq256xx.yaml        | 99 +++++++++++++++++++
> >   1 file changed, 99 insertions(+)
> >   create mode 100644 Documentation/devicetree/bindings/power/supply/bq256xx.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
> > new file mode 100644
> > index 000000000000..67db4ba9fdb6
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
> > @@ -0,0 +1,99 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
> > +# Copyright (C) 2020 Texas Instruments Incorporated
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/power/supply/bq256xx.yaml#";
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> > +
> > +title: TI bq256xx Switch Mode Buck Charger
> > +
> > +maintainers:
> > +  - Ricardo Rivera-Matos <r-rivera-matos@xxxxxx>
> > +
> > +description: |
> > +  The bq256xx devices are a family of highly-integrated battery charge
> > +  management and system power management ICs for single cell Li-ion and Li-
> > +  polymer batteries.
> > +
> > +  Datasheets:
> > +    - https://www.ti.com/lit/ds/symlink/bq25600.pdf
> > +    - https://www.ti.com/lit/ds/symlink/bq25601.pdf
> > +    - https://www.ti.com/lit/ds/symlink/bq25600d.pdf
> > +    - https://www.ti.com/lit/ds/symlink/bq25601d.pdf
> > +    - https://www.ti.com/lit/ds/symlink/bq25611d.pdf
> > +    - https://www.ti.com/lit/ds/symlink/bq25618.pdf
> > +    - https://www.ti.com/lit/ds/symlink/bq25619.pdf
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - ti,bq25600
> > +      - ti,bq25601
> > +      - ti,bq25600d
> > +      - ti,bq25601d
> > +      - ti,bq25611d
> > +      - ti,bq25618
> > +      - ti,bq25619
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  ti,watchdog-timer:
> Poorly named since we have 'ti,watchdog-timers' already and is
> completely different.

I think you made a comment on my DT to make this ti,watchdog-timeout-ms 
and then we can remove the type.


> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description: |
> > +      Watchdog timer in milli seconds. 0 (default) disables the watchdog
> If you have units, then you should use standard unit suffix.
>
> > +    minimum: 0
> > +    maximum: 160000
> > +    enum: [ 0, 40000, 80000, 160000]
> > +
> > +  input-voltage-limit-microvolt:
> > +    description: |
> > +       Minimum input voltage limit in micro volts with a 100000 micro volt step
> > +    minimum: 3900000
> > +    maximum: 5400000
> > +
> > +  input-current-limit-microamp:
> > +    description: |
> > +       Maximum input current limit in micro amps with a 100000 micro amp step
> > +    minimum: 100000
> > +    maximum: 3200000
> Aren't these properties of the battery, not the charger?
>
> > +
> > +required:
> > +  - compatible
> > +  - reg
> monitored-battery not required?
>
> Add:
>
> additionalProperties: false

What about using

unevaluatedProperties: false

Dan