[PATCH] ARM: dts: BCM5301X: Fix pin controller node

[Florian Fainelli]

The pin controller resources start at 0xc0 from the CRU base which is at
0x100 from th DMU base, for a final address of 0x1800_c1c0, whereas we
are currently off by 0x100. The resource size of the CRU is also
incorrect and should end at 0x248 bytes from 0x100 which is the start
address. Finally, the compatibility strings defined for the
pin-controller node should reflect the SoC being used.

Fixes: 9994241ac97c ("ARM: dts: BCM5301X: Describe Northstar pins mux controller")
Reported-by: Christian Lamparter <chunkeey@xxxxxxxxx>
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
Christian, can you test this as a preliminary patch for your Cisco
Meraki MR32 series? Thanks!

 arch/arm/boot/dts/bcm4708.dtsi  | 4 ++++
 arch/arm/boot/dts/bcm4709.dtsi  | 4 ++++
 arch/arm/boot/dts/bcm5301x.dtsi | 8 ++++----
 3 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi
index 1a19e97a987d..5064fe51e402 100644
--- a/arch/arm/boot/dts/bcm4708.dtsi
+++ b/arch/arm/boot/dts/bcm4708.dtsi
@@ -43,6 +43,10 @@ cpu@1 {
 
 };
 
+&pinctrl {
+	compatible = "brcm,bcm4708-pinmux";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/bcm4709.dtsi
index e1bb8661955f..7417c275ea9d 100644
--- a/arch/arm/boot/dts/bcm4709.dtsi
+++ b/arch/arm/boot/dts/bcm4709.dtsi
@@ -5,6 +5,10 @@
 
 #include "bcm4708.dtsi"
 
+&pinctrl {
+	compatible = "brcm,bcm4709-pinmux";
+};
+
 &uart0 {
 	clock-frequency = <125000000>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 2d9b4dd05830..bf49943f504a 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -402,14 +402,14 @@ dmu@1800c000 {
 
 		cru@100 {
 			compatible = "simple-bus";
-			reg = <0x100 0x1a4>;
+			reg = <0x100 0x248>;
 			ranges;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			pin-controller@1c0 {
-				compatible = "brcm,bcm4708-pinmux";
-				reg = <0x1c0 0x24>;
+			pinctrl: pin-controller@c0 {
+				compatible = "brcm,bcm53012-pinmux";
+				reg = <0xc0 0x24>;
 				reg-names = "cru_gpio_control";
 
 				spi-pins {
-- 
2.25.1