RE: [PATCH v3 2/3] media: dt-bindings: media: xilinx: Add Xilinx UHD-SDI Receiver Subsystem

From: Vishal Sagar
Date: Wed Aug 19 2020 - 09:46:06 EST

Next message: Geert Uytterhoeven: "[PATCH v3 3/7] dt-bindings: net: renesas,etheravb: Convert to json-schema"
Previous message: Geert Uytterhoeven: "[PATCH v3 1/7] dt-bindings: net: ethernet-controller: Add internal delay properties"
Next in thread: Laurent Pinchart: "Re: [PATCH v3 2/3] media: dt-bindings: media: xilinx: Add Xilinx UHD-SDI Receiver Subsystem"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Laurent and Rob,

Thanks for reviewing this patch.

> -----Original Message-----
> From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> Sent: Wednesday, July 15, 2020 9:59 PM
> To: Vishal Sagar <vsagar@xxxxxxxxxx>
> Cc: Rob Herring <robh@xxxxxxxxxx>; Hyun Kwon <hyunk@xxxxxxxxxx>;
> hverkuil@xxxxxxxxx; mchehab@xxxxxxxxxx; mark.rutland@xxxxxxx; Michal
> Simek <michals@xxxxxxxxxx>; linux-media@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; joe@xxxxxxxxxxx; Sandip Kothari
> <sandipk@xxxxxxxxxx>; Dinesh Kumar <dineshk@xxxxxxxxxx>
> Subject: Re: [PATCH v3 2/3] media: dt-bindings: media: xilinx: Add Xilinx UHD-
> SDI Receiver Subsystem
>
> Hi Vishal,
>
> Thank you for the patch.
>
> On Mon, Jul 13, 2020 at 12:54:47PM -0600, Rob Herring wrote:
> > On Thu, Jun 18, 2020 at 11:03:03AM +0530, Vishal Sagar wrote:
> > > Add bindings documentation for Xilinx UHD-SDI Receiver Subsystem.
> > >
> > > The Xilinx UHD-SDI Receiver Subsystem consists of SMPTE UHD-SDI (RX) IP
> > > core, an SDI RX to Video Bridge IP core to convert SDI video to native
> > > video and a Video In to AXI4-Stream IP core to convert native video to
> > > AXI4-Stream.
> > >
> > > Signed-off-by: Vishal Sagar <vishal.sagar@xxxxxxxxxx>
> > > ---
> > > v3
> > > - bpc instead of bpp
> > > - removed bpc as required property (default to 10 bpc)
> > > - add dt-bindings/media/xilinx-sdi.h
> > > - made line-rate as u32 instead of string
> > > - fixed reg
> > > - fixed s/upto/up to/
> > >
> > > v2
> > > - Removed references to xlnx,video*
> > > - Fixed as per Sakari Ailus and Rob Herring's comments
> > > - Converted to yaml format
> > >
> > > .../bindings/media/xilinx/xlnx,sdirxss.yaml | 132 ++++++++++++++++++
> > > include/dt-bindings/media/xilinx-sdi.h | 20 +++
> > > 2 files changed, 152 insertions(+)
> > > create mode 100644
> Documentation/devicetree/bindings/media/xilinx/xlnx,sdirxss.yaml
> > > create mode 100644 include/dt-bindings/media/xilinx-sdi.h
> > >
> > > diff --git
> a/Documentation/devicetree/bindings/media/xilinx/xlnx,sdirxss.yaml
> b/Documentation/devicetree/bindings/media/xilinx/xlnx,sdirxss.yaml
> > > new file mode 100644
> > > index 000000000000..6cfc18ca435f
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,sdirxss.yaml
> > > @@ -0,0 +1,132 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/media/xilinx/xlnx,sdirxss.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +
>
> I think a single blank line is enough.
>

Ok I will remove extra empty line in next version.

> > > +title: Xilinx SMPTE UHD-SDI Receiver Subsystem
> > > +
> > > +maintainers:
> > > + - Vishal Sagar <vishal.sagar@xxxxxxxxxx>
> > > +
> > > +description: |
> > > + The SMPTE UHD-SDI Receiver (RX) Subsystem allows you to quickly
> create systems
> > > + based on SMPTE SDI protocols. It receives unaligned native SDI streams
> from
> > > + the SDI GT PHY and outputs an AXI4-Stream video stream, native video,
> or
> > > + native SDI using Xilinx transceivers as the physical layer.
> > > +
> > > + The subsystem consists of
> > > + 1 - SMPTE UHD-SDI Rx
> > > + 2 - SDI Rx to Native Video Bridge
> > > + 3 - Video In to AXI4-Stream Bridge
> > > +
> > > + The subsystem can capture SDI streams in up to 12G mode 8 data
> streams and output
> > > + a dual pixel per clock RGB/YUV444,422/420 10/12 bits per component
> AXI4-Stream.
> > > +
> > > +properties:
> > > + compatible:
> > > + items:
> > > + - enum:
> > > + - xlnx,v-smpte-uhdsdi-rx-ss-2.0
> >
> > Should be indented 2 more spaces.
>
> Or you could simply use
>
> properties:
> compatible:
> const: xlnx,v-smpte-uhdsdi-rx-ss-2.0
>

Ok I will fix this in the next version.

> > > +
> > > + reg:
> > > + maxItems: 1
> > > +
> > > + interrupts:
> > > + maxItems: 1
> > > +
> > > + clocks:
> > > + description: List of clock specifiers
> >
> > Drop. That's every 'clocks' property.
> >

Ok I will drop the description in next version.

> > > + items:
> > > + - description: AXI4-Lite clock
> > > + - description: SMPTE UHD-SDI Rx core clock
> > > + - description: Video clock
> > > +
> > > + clock-names:
> > > + items:
> > > + - const: s_axi_aclk
> > > + - const: sdi_rx_clk
> > > + - const: video_out_clk
> > > +
> > > + xlnx,bpc:
> > > + description: Bits per component supported. Can be 10 or 12 bits per
> component only.
> > > + allOf:
> >
> > You can drop the 'allOf' now.
> >

Ok will update this in next version.

> > > + - $ref: "/schemas/types.yaml#/definitions/uint32"
> > > + - enum: [10, 12]
> >
> > Seems like this should be a standard property?
>
> Rob, if my understanding is correct, this tells for how many bits per
> component the IP core has been synthesized. I think it qualifies as a
> vendor property, as how to express constraints on supported formats (for
> IP cores that can be synthesized with different options) is highly
> vendor-specific.
>

Right Laurent. This is specific to Xilinx Video IP cores.

> Vishal, I think the question I asked in the review of v2 fell through
> the cracks. Is the documentation for the new IP core version available ?
> Should this property only be allowed for the new version, given that in
> v2.0 the BPC is fixed to 10 ?
>

The new IP core is released with Vivado 2020.1 but the documentation isn't yet
publicly updated.

This property is optional and the driver defaults to 10bpc in case this property is not specified.

> > > +
> > > + xlnx,line-rate:
> > > + description: |
> > > + The maximum mode supported by the design. Possible values are as
> below
> > > + 0 - XSDI_STD_3G - 3G mode
> > > + 1 - XSDI_STD_6G - 6G mode
> > > + 2 - XSDI_STD_12G_8DS - 12G mode with 8 data streams
> > > + allOf:
> > > + - $ref: "/schemas/types.yaml#/definitions/uint32"
> > > + - enum: [0, 1, 2]
> >
> > Standard?
>
> For this one, I'm not sure. There's little support for SDI in the
> kernel, and I'm sure we'll get this wrong the first time. I'd rather try
> not to over-standardize properties before we have more examples.
>

Right. These are specific to Xilinx SDI Rx IP configuration.

> > > +
> > > + xlnx,include-edh:
> > > + type: boolean
> > > + description: |
> > > + This is present when the Error Detection and Handling processor is
> > > + enabled in design.
> > > +
> > > + ports:
> > > + type: object
> > > + description: |
> > > + Generally the SDI port is connected to a device like SDI Broadcast
> camera
> > > + which is independently controlled. Hence port@0 is a source port
> which can be
> > > + connected to downstream IP which can work with AXI4 Stream data.
> > > + properties:
> > > + port@0:
> > > + type: object
> > > + description: Source port
> > > + properties:
> > > + reg:
> > > + const: 0
> > > + endpoint:
> > > + type: object
> > > + properties:
> > > + remote-endpoint: true
> > > + required:
> > > + - remote-endpoint
> > > + additionalProperties: false
> > > + additionalProperties: false
>
> Same here, I explained in the review of v2 that we should have an input
> port.
>

I will add the input / sink port to this device tree node.

> > > +
> > > +required:
> > > + - compatible
> > > + - reg
> > > + - interrupts
> > > + - clocks
> > > + - clock-names
> > > + - xlnx,line-rate
> > > + - ports
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > + - |
> > > + #include <dt-bindings/media/xilinx-sdi.h>
> > > + uhdsdirxss: v-smpte-uhdsdi-rxss@80000000 {
>
> The label is not used, you can drop it.
>

Ok. I will remove this in the next version.

> > > + compatible = "xlnx,v-smpte-uhdsdi-rx-ss-2.0";
> > > + interrupt-parent = <&gic>;
> > > + interrupts = <0 89 4>;
> > > + reg = <0x80000000 0x10000>;
> > > + xlnx,include-edh;
> > > + xlnx,line-rate = <XSDI_STD_12G_8DS>;
> > > + clocks = <&clk_1>, <&si570_1>, <&clk_2>;
> > > + clock-names = "s_axi_aclk", "sdi_rx_clk", "video_out_clk";
> > > + xlnx,bpc = <10>;
>
> I would group the xlnx,* properties after the standard properties.
>

Noted. Will update in next version.

> > > +
> > > + ports {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + port@0 {
> > > + reg = <0>;
> > > + sdirx_out: endpoint {
> > > + remote-endpoint = <&vcap_sdirx_in>;
> > > + };
> > > + };
> > > + };
> > > + };
> > > +...
> > > diff --git a/include/dt-bindings/media/xilinx-sdi.h b/include/dt-
> bindings/media/xilinx-sdi.h
> > > new file mode 100644
> > > index 000000000000..11938fade041
> > > --- /dev/null
> > > +++ b/include/dt-bindings/media/xilinx-sdi.h
> > > @@ -0,0 +1,20 @@
> > > +/* SPDX-License-Identifier: GPL-2.0 */
> > > +/*
> > > + * Xilinx SDI device tree bindings
> > > + *
> > > + * Copyright (C) 2020 Xilinx, Inc.
> > > + *
> > > + * Contacts: Vishal Sagar <vishal.sagar@xxxxxxxxxx>
> > > + */
> > > +
> > > +#ifndef __DT_BINDINGS_MEDIA_XILINX_SDI_H__
> > > +#define __DT_BINDINGS_MEDIA_XILINX_SDI_H__
> > > +
> > > +/*
> > > + * SDI Configurations
> > > + */
> > > +#define XSDI_STD_3G 0
> > > +#define XSDI_STD_6G 1
> > > +#define XSDI_STD_12G_8DS 2
> > > +
> > > +#endif /* __DT_BINDINGS_MEDIA_XILINX_SDI_H__ */
>
> --
> Regards,
>
> Laurent Pinchart

Regards
Vishal Sagar

Next message: Geert Uytterhoeven: "[PATCH v3 3/7] dt-bindings: net: renesas,etheravb: Convert to json-schema"
Previous message: Geert Uytterhoeven: "[PATCH v3 1/7] dt-bindings: net: ethernet-controller: Add internal delay properties"
Next in thread: Laurent Pinchart: "Re: [PATCH v3 2/3] media: dt-bindings: media: xilinx: Add Xilinx UHD-SDI Receiver Subsystem"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]