Re: [PATCH] ARM: dts: BCM5301X: Fix pin controller node

[Florian Fainelli]

On 8/19/20 8:36 AM, Rafał Miłecki wrote:
> On Wed, 19 Aug 2020 at 06:23, Florian Fainelli <f.fainelli@xxxxxxxxx> wrote:
>> The pin controller resources start at 0xc0 from the CRU base which is at
>> 0x100 from th DMU base, for a final address of 0x1800_c1c0, whereas we
>> are currently off by 0x100. The resource size of the CRU is also
>> incorrect and should end at 0x248 bytes from 0x100 which is the start
>> address. Finally, the compatibility strings defined for the
>> pin-controller node should reflect the SoC being used.
>>
>> Fixes: 9994241ac97c ("ARM: dts: BCM5301X: Describe Northstar pins mux controller")
> 
> Let me verify that fix. I'm confused as I believe I got pinctrl
> working for uart1 :|

Sure, please let me know what you find. Chances are that UART1 was
already pinmuxed corectly by the boot loader for your device and this
could have turned out as a no-op.
-- 
Florian