[PATCH RESEND] rtl818x_pci: switch from 'pci_' to 'dma_' API

From: Christophe JAILLET
Date: Thu Aug 20 2020 - 10:15:08 EST

Next message: Michal Hocko: "Re: [PATCH 1/1] mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary"
Previous message: Alexander Duyck: "Re: [RFC PATCH v2 4/5] mm: Split release_pages work into 3 passes"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.

When memory is allocated in 'rtl8180_init_rx_ring()' and
'rtl8180_init_tx_ring()' GFP_KERNEL can be used because both functions are
called from 'rtl8180_start()', which is a .start function (see struct
ieee80211_ops)
.start function can sleep, as explicitly stated in include/net/mac80211.h.

@@
@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL

@@
@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE

@@
@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE

@@
@@
- PCI_DMA_NONE
+ DMA_NONE

@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)

Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
---
If needed, see post from Christoph Hellwig on the kernel-janitors ML:
https://marc.info/?l=kernel-janitors&m=158745678307186&w=4

This patch is a ressend because there was a typo in Kalle Valo
<kvalo@xxxxxxxxxxxxxx> mail address.
---
.../wireless/realtek/rtl818x/rtl8180/dev.c | 70 ++++++++++---------
1 file changed, 37 insertions(+), 33 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c b/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
index ba3286f732cc..2477e18c7cae 100644
--- a/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
@@ -260,20 +260,20 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev)
if (unlikely(!new_skb))
goto done;

- mapping = pci_map_single(priv->pdev,
- skb_tail_pointer(new_skb),
- MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+ mapping = dma_map_single(&priv->pdev->dev,
+ skb_tail_pointer(new_skb),
+ MAX_RX_SIZE, DMA_FROM_DEVICE);

- if (pci_dma_mapping_error(priv->pdev, mapping)) {
+ if (dma_mapping_error(&priv->pdev->dev, mapping)) {
kfree_skb(new_skb);
dev_err(&priv->pdev->dev, "RX DMA map error\n");

goto done;
}

- pci_unmap_single(priv->pdev,
+ dma_unmap_single(&priv->pdev->dev,
*((dma_addr_t *)skb->cb),
- MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+ MAX_RX_SIZE, DMA_FROM_DEVICE);
skb_put(skb, flags & 0xFFF);

rx_status.antenna = (flags2 >> 15) & 1;
@@ -355,8 +355,8 @@ static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio)

ring->idx = (ring->idx + 1) % ring->entries;
skb = __skb_dequeue(&ring->queue);
- pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
- skb->len, PCI_DMA_TODEVICE);
+ dma_unmap_single(&priv->pdev->dev, le32_to_cpu(entry->tx_buf),
+ skb->len, DMA_TO_DEVICE);

info = IEEE80211_SKB_CB(skb);
ieee80211_tx_info_clear_status(info);
@@ -473,10 +473,10 @@ static void rtl8180_tx(struct ieee80211_hw *dev,
prio = skb_get_queue_mapping(skb);
ring = &priv->tx_ring[prio];

- mapping = pci_map_single(priv->pdev, skb->data,
- skb->len, PCI_DMA_TODEVICE);
+ mapping = dma_map_single(&priv->pdev->dev, skb->data, skb->len,
+ DMA_TO_DEVICE);

- if (pci_dma_mapping_error(priv->pdev, mapping)) {
+ if (dma_mapping_error(&priv->pdev->dev, mapping)) {
kfree_skb(skb);
dev_err(&priv->pdev->dev, "TX DMA mapping error\n");
return;
@@ -1004,8 +1004,9 @@ static int rtl8180_init_rx_ring(struct ieee80211_hw *dev)
else
priv->rx_ring_sz = sizeof(struct rtl8180_rx_desc);

- priv->rx_ring = pci_zalloc_consistent(priv->pdev, priv->rx_ring_sz * 32,
- &priv->rx_ring_dma);
+ priv->rx_ring = dma_alloc_coherent(&priv->pdev->dev,
+ priv->rx_ring_sz * 32,
+ &priv->rx_ring_dma, GFP_KERNEL);
if (!priv->rx_ring || (unsigned long)priv->rx_ring & 0xFF) {
wiphy_err(dev->wiphy, "Cannot allocate RX ring\n");
return -ENOMEM;
@@ -1018,20 +1019,23 @@ static int rtl8180_init_rx_ring(struct ieee80211_hw *dev)
dma_addr_t *mapping;
entry = priv->rx_ring + priv->rx_ring_sz*i;
if (!skb) {
- pci_free_consistent(priv->pdev, priv->rx_ring_sz * 32,
- priv->rx_ring, priv->rx_ring_dma);
+ dma_free_coherent(&priv->pdev->dev,
+ priv->rx_ring_sz * 32,
+ priv->rx_ring, priv->rx_ring_dma);
wiphy_err(dev->wiphy, "Cannot allocate RX skb\n");
return -ENOMEM;
}
priv->rx_buf[i] = skb;
mapping = (dma_addr_t *)skb->cb;
- *mapping = pci_map_single(priv->pdev, skb_tail_pointer(skb),
- MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+ *mapping = dma_map_single(&priv->pdev->dev,
+ skb_tail_pointer(skb), MAX_RX_SIZE,
+ DMA_FROM_DEVICE);

- if (pci_dma_mapping_error(priv->pdev, *mapping)) {
+ if (dma_mapping_error(&priv->pdev->dev, *mapping)) {
kfree_skb(skb);
- pci_free_consistent(priv->pdev, priv->rx_ring_sz * 32,
- priv->rx_ring, priv->rx_ring_dma);
+ dma_free_coherent(&priv->pdev->dev,
+ priv->rx_ring_sz * 32,
+ priv->rx_ring, priv->rx_ring_dma);
wiphy_err(dev->wiphy, "Cannot map DMA for RX skb\n");
return -ENOMEM;
}
@@ -1054,14 +1058,13 @@ static void rtl8180_free_rx_ring(struct ieee80211_hw *dev)
if (!skb)
continue;

- pci_unmap_single(priv->pdev,
- *((dma_addr_t *)skb->cb),
- MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+ dma_unmap_single(&priv->pdev->dev, *((dma_addr_t *)skb->cb),
+ MAX_RX_SIZE, DMA_FROM_DEVICE);
kfree_skb(skb);
}

- pci_free_consistent(priv->pdev, priv->rx_ring_sz * 32,
- priv->rx_ring, priv->rx_ring_dma);
+ dma_free_coherent(&priv->pdev->dev, priv->rx_ring_sz * 32,
+ priv->rx_ring, priv->rx_ring_dma);
priv->rx_ring = NULL;
}

@@ -1073,8 +1076,8 @@ static int rtl8180_init_tx_ring(struct ieee80211_hw *dev,
dma_addr_t dma;
int i;

- ring = pci_zalloc_consistent(priv->pdev, sizeof(*ring) * entries,
- &dma);
+ ring = dma_alloc_coherent(&priv->pdev->dev, sizeof(*ring) * entries,
+ &dma, GFP_KERNEL);
if (!ring || (unsigned long)ring & 0xFF) {
wiphy_err(dev->wiphy, "Cannot allocate TX ring (prio = %d)\n",
prio);
@@ -1103,14 +1106,15 @@ static void rtl8180_free_tx_ring(struct ieee80211_hw *dev, unsigned int prio)
struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
struct sk_buff *skb = __skb_dequeue(&ring->queue);

- pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
- skb->len, PCI_DMA_TODEVICE);
+ dma_unmap_single(&priv->pdev->dev, le32_to_cpu(entry->tx_buf),
+ skb->len, DMA_TO_DEVICE);
kfree_skb(skb);
ring->idx = (ring->idx + 1) % ring->entries;
}

- pci_free_consistent(priv->pdev, sizeof(*ring->desc)*ring->entries,
- ring->desc, ring->dma);
+ dma_free_coherent(&priv->pdev->dev,
+ sizeof(*ring->desc) * ring->entries, ring->desc,
+ ring->dma);
ring->desc = NULL;
}

@@ -1754,8 +1758,8 @@ static int rtl8180_probe(struct pci_dev *pdev,
goto err_free_reg;
}

- if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) ||
- (err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))) {
+ if ((err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) ||
+ (err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)))) {
printk(KERN_ERR "%s (rtl8180): No suitable DMA available\n",
pci_name(pdev));
goto err_free_reg;
--
2.25.1

Next message: Michal Hocko: "Re: [PATCH 1/1] mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary"
Previous message: Alexander Duyck: "Re: [RFC PATCH v2 4/5] mm: Split release_pages work into 3 passes"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]