Re: [PATCH] dt-bindings: mmc: sdhci-am654: Document bindings for the host controllers on TI's J7200 devices

[Ulf Hansson]

On Sun, 2 Aug 2020 at 09:01, Faiz Abbas <faiz_abbas@xxxxxx> wrote:
>
> Add binding documentation for mmc host controllers present on
> TI's J7200 SOC
>
> Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx>

Applied for next, thanks!

Kind regards
Uffe


> ---
>  Documentation/devicetree/bindings/mmc/sdhci-am654.txt | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
> index 6d202f4d9249..b49cbfdd679f 100644
> --- a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
> +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
> @@ -12,6 +12,8 @@ Required Properties:
>                         "ti,am654-sdhci-5.1": SDHCI on AM654 device.
>                         "ti,j721e-sdhci-8bit": 8 bit SDHCI on J721E device.
>                         "ti,j721e-sdhci-4bit": 4 bit SDHCI on J721E device.
> +                       "ti,j7200-sdhci-8bit": 8 bit SDHCI on J7200 device.
> +                       "ti,j7200-sdhci-4bit": 4 bit SDHCI on J7200 device.
>         - reg: Must be two entries.
>                 - The first should be the sdhci register space
>                 - The second should the subsystem/phy register space
> @@ -33,7 +35,9 @@ Required Properties:
>           These bindings must be provided otherwise the driver will disable the
>           corresponding speed mode (i.e. all nodes must provide at least -legacy)
>
> -Optional Properties (Required for ti,am654-sdhci-5.1 and ti,j721e-sdhci-8bit):
> +Optional Properties (Required for ti,am654-sdhci-5.1,
> +                                 ti,j721e-sdhci-8bit,
> +                                 ti,j7200-sdhci-8bit):
>         - ti,trm-icp: DLL trim select
>         - ti,driver-strength-ohm: driver strength in ohms.
>                                   Valid values are 33, 40, 50, 66 and 100 ohms.
> --
> 2.17.1
>