[PATCH v2 2/2] x86/resctrl: Enable user to view thread or core throttling mode
From: Fenghua Yu
Date: Fri Aug 21 2020 - 14:29:10 EST
Early Intel hardware implementations of Memory Bandwidth Allocation (MBA)
could only control bandwidth at the processor core level. This meant that
when two processes with different bandwidth allocations ran simultaneously
on the same core the hardware had to resolve this difference. It did so by
applying the higher throttling value (lower bandwidth) to both processes.
Newer implementations can apply different throttling values to each
thread on a core.
Introduce a new resctrl file, "thread_throttle_mode", on Intel systems
that shows to the user how throttling values are allocated, per-core or
per-thread.
On systems that support per-core throttling, the file will display "max".
On newer systems that support per-thread throttling, the file will display
"per-thread".
AMD confirmed in
https://lore.kernel.org/lkml/18d277fd-6523-319c-d560-66b63ff606b8@xxxxxxx
that AMD bandwidth allocation is already at thread level but that the AMD
implementation does not use a memory delay throttle mode. So to avoid
confusion the thread throttling mode would be UNDEFINED on AMD systems
and the "thread_throttle_mode" file will not be visible.
Originally-by: Reinette Chatre <reinette.chatre@xxxxxxxxx>
Signed-off-by: Fenghua Yu <fenghua.yu@xxxxxxxxx>
Reviewed-by: Reinette Chatre <reinette.chatre@xxxxxxxxx>
---
Change log:
v2:
- Rename "arch_throttle_mode" to "throttle_mode" and
"rdtgroup_rftype_by_name()" to "rdtgroup_rftype_get_by_name()" (Boris).
Documentation/x86/resctrl_ui.rst | 18 ++++++++-
arch/x86/kernel/cpu/resctrl/core.c | 11 ++++++
arch/x86/kernel/cpu/resctrl/internal.h | 30 ++++++++++++---
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 53 +++++++++++++++++++++++++-
4 files changed, 103 insertions(+), 9 deletions(-)
diff --git a/Documentation/x86/resctrl_ui.rst b/Documentation/x86/resctrl_ui.rst
index 5368cedfb530..e59b7b93a9b4 100644
--- a/Documentation/x86/resctrl_ui.rst
+++ b/Documentation/x86/resctrl_ui.rst
@@ -138,6 +138,18 @@ with respect to allocation:
non-linear. This field is purely informational
only.
+"thread_throttle_mode":
+ Indicator on Intel systems of how tasks running on threads
+ of a physical core are throttled in cases where they
+ request different memory bandwidth percentages:
+
+ "max":
+ the smallest percentage is applied
+ to all threads
+ "per-thread":
+ bandwidth percentages are directly applied to
+ the threads running on the core
+
If RDT monitoring is available there will be an "L3_MON" directory
with the following files:
@@ -364,8 +376,10 @@ to the next control step available on the hardware.
The bandwidth throttling is a core specific mechanism on some of Intel
SKUs. Using a high bandwidth and a low bandwidth setting on two threads
-sharing a core will result in both threads being throttled to use the
-low bandwidth. The fact that Memory bandwidth allocation(MBA) is a core
+sharing a core may result in both threads being throttled to use the
+low bandwidth (see "thread_throttle_mode").
+
+The fact that Memory bandwidth allocation(MBA) may be a core
specific mechanism where as memory bandwidth monitoring(MBM) is done at
the package level may lead to confusion when users try to apply control
via the MBA and then monitor the bandwidth to see if the controls are
diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index 6a9df71c1b9e..249f005fe26e 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -270,6 +270,12 @@ static bool __get_mem_config_intel(struct rdt_resource *r)
}
r->data_width = 3;
+ if (boot_cpu_has(X86_FEATURE_PER_THREAD_MBA))
+ r->membw.throttle_mode = THREAD_THROTTLE_PER_THREAD;
+ else
+ r->membw.throttle_mode = THREAD_THROTTLE_MAX;
+ thread_throttle_mode_init();
+
r->alloc_capable = true;
r->alloc_enabled = true;
@@ -289,6 +295,11 @@ static bool __rdt_get_mem_config_amd(struct rdt_resource *r)
/* AMD does not use delay */
r->membw.delay_linear = false;
+ /*
+ * AMD does not use memory delay throttle model to control
+ * the allocation like Intel does.
+ */
+ r->membw.throttle_mode = THREAD_THROTTLE_UNDEFINED;
r->membw.min_bw = 0;
r->membw.bw_gran = 1;
/* Max value is 2048, Data width should be 4 in decimal */
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 5ffa32256b3b..bf31a74a929a 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -369,6 +369,20 @@ struct rdt_cache {
unsigned int shareable_bits;
};
+/**
+ * enum membw_throttle_mode - System's memory bandwidth throttling mode
+ * @THREAD_THROTTLE_UNDEFINED: Not relevant to the system
+ * @THREAD_THROTTLE_MAX: Memory bandwidth is throttled at the core
+ * always using smallest bandwidth percentage
+ * assigned to threads, aka "max throttling"
+ * @THREAD_THROTTLE_PER_THREAD: Memory bandwidth is throttled at the thread
+ */
+enum membw_throttle_mode {
+ THREAD_THROTTLE_UNDEFINED = 0,
+ THREAD_THROTTLE_MAX,
+ THREAD_THROTTLE_PER_THREAD,
+};
+
/**
* struct rdt_membw - Memory bandwidth allocation related data
* @max_delay: Max throttle delay. Delay is the hardware
@@ -376,16 +390,19 @@ struct rdt_cache {
* @min_bw: Minimum memory bandwidth percentage user can request
* @bw_gran: Granularity at which the memory bandwidth is allocated
* @delay_linear: True if memory B/W delay is in linear scale
+ * @throttle_mode: Bandwidth throttling mode when threads request
+ * different memory bandwidths
* @mba_sc: True if MBA software controller(mba_sc) is enabled
* @mb_map: Mapping of memory B/W percentage to memory B/W delay
*/
struct rdt_membw {
- u32 max_delay;
- u32 min_bw;
- u32 bw_gran;
- u32 delay_linear;
- bool mba_sc;
- u32 *mb_map;
+ u32 max_delay;
+ u32 min_bw;
+ u32 bw_gran;
+ u32 delay_linear;
+ enum membw_throttle_mode throttle_mode;
+ bool mba_sc;
+ u32 *mb_map;
};
static inline bool is_llc_occupancy_enabled(void)
@@ -612,5 +629,6 @@ void __check_limbo(struct rdt_domain *d, bool force_free);
bool cbm_validate_intel(char *buf, u32 *data, struct rdt_resource *r);
bool cbm_validate_amd(char *buf, u32 *data, struct rdt_resource *r);
void rdt_domain_reconfigure_cdp(struct rdt_resource *r);
+void __init thread_throttle_mode_init(void);
#endif /* _ASM_X86_RESCTRL_INTERNAL_H */
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 3f844f14fc0a..4ad7eb9c57ba 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -1017,6 +1017,19 @@ static int max_threshold_occ_show(struct kernfs_open_file *of,
return 0;
}
+static int rdt_thread_throttle_mode_show(struct kernfs_open_file *of,
+ struct seq_file *seq, void *v)
+{
+ struct rdt_resource *r = of->kn->parent->priv;
+
+ if (r->membw.throttle_mode == THREAD_THROTTLE_PER_THREAD)
+ seq_puts(seq, "per-thread\n");
+ else
+ seq_puts(seq, "max\n");
+
+ return 0;
+}
+
static ssize_t max_threshold_occ_write(struct kernfs_open_file *of,
char *buf, size_t nbytes, loff_t off)
{
@@ -1513,6 +1526,17 @@ static struct rftype res_common_files[] = {
.seq_show = rdt_delay_linear_show,
.fflags = RF_CTRL_INFO | RFTYPE_RES_MB,
},
+ /*
+ * Platform specific which (if any) capabilities are provided by
+ * thread_throttle_mode. Defer "fflags" initialization to platform
+ * discovery.
+ */
+ {
+ .name = "thread_throttle_mode",
+ .mode = 0444,
+ .kf_ops = &rdtgroup_kf_single_ops,
+ .seq_show = rdt_thread_throttle_mode_show,
+ },
{
.name = "max_threshold_occupancy",
.mode = 0644,
@@ -1583,7 +1607,7 @@ static int rdtgroup_add_files(struct kernfs_node *kn, unsigned long fflags)
lockdep_assert_held(&rdtgroup_mutex);
for (rft = rfts; rft < rfts + len; rft++) {
- if ((fflags & rft->fflags) == rft->fflags) {
+ if (rft->fflags && ((fflags & rft->fflags) == rft->fflags)) {
ret = rdtgroup_add_file(kn, rft);
if (ret)
goto error;
@@ -1600,6 +1624,33 @@ static int rdtgroup_add_files(struct kernfs_node *kn, unsigned long fflags)
return ret;
}
+static struct rftype *get_rdtgroup_rftype_get_by_name(const char *name)
+{
+ struct rftype *rfts, *rft;
+ int len;
+
+ rfts = res_common_files;
+ len = ARRAY_SIZE(res_common_files);
+
+ for (rft = rfts; rft < rfts + len; rft++) {
+ if (!strcmp(rft->name, name))
+ return rft;
+ }
+
+ return NULL;
+}
+
+void __init thread_throttle_mode_init(void)
+{
+ struct rftype *rft;
+
+ rft = get_rdtgroup_rftype_get_by_name("thread_throttle_mode");
+ if (!rft)
+ return;
+
+ rft->fflags = RF_CTRL_INFO | RFTYPE_RES_MB;
+}
+
/**
* rdtgroup_kn_mode_restrict - Restrict user access to named resctrl file
* @r: The resource group with which the file is associated.
--
2.19.1