[PATCH v3 09/11] usb: phy: phy-mv-usb: convert to readl_poll_timeout_atomic()

[Chunfeng Yun]

Use readl_poll_timeout_atomic() to simplify code

Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
v3: re-align argument of log suggested by Sergei

v2: udelay 10us instead of 20us according to kerneldoc
---
 drivers/usb/phy/phy-mv-usb.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c
index ce767ec..576d925 100644
--- a/drivers/usb/phy/phy-mv-usb.c
+++ b/drivers/usb/phy/phy-mv-usb.c
@@ -8,6 +8,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/uaccess.h>
 #include <linux/device.h>
 #include <linux/proc_fs.h>
@@ -135,8 +136,8 @@ static int mv_otg_set_timer(struct mv_otg *mvotg, unsigned int id,
 
 static int mv_otg_reset(struct mv_otg *mvotg)
 {
-	unsigned int loops;
 	u32 tmp;
+	int ret;
 
 	/* Stop the controller */
 	tmp = readl(&mvotg->op_regs->usbcmd);
@@ -146,15 +147,12 @@ static int mv_otg_reset(struct mv_otg *mvotg)
 	/* Reset the controller to get default values */
 	writel(USBCMD_CTRL_RESET, &mvotg->op_regs->usbcmd);
 
-	loops = 500;
-	while (readl(&mvotg->op_regs->usbcmd) & USBCMD_CTRL_RESET) {
-		if (loops == 0) {
-			dev_err(&mvotg->pdev->dev,
-				"Wait for RESET completed TIMEOUT\n");
-			return -ETIMEDOUT;
-		}
-		loops--;
-		udelay(20);
+	ret = readl_poll_timeout_atomic(&mvotg->op_regs->usbcmd, tmp,
+				(tmp & USBCMD_CTRL_RESET), 10, 10000);
+	if (ret < 0) {
+		dev_err(&mvotg->pdev->dev,
+			"Wait for RESET completed TIMEOUT\n");
+		return ret;
 	}
 
 	writel(0x0, &mvotg->op_regs->usbintr);
-- 
1.9.1