Re: [PATCH v5 0/3] Add Actions Semi Owl family sirq support

[Cristian Ciocaltea]

Hi Mani,

On Sat, Aug 22, 2020 at 06:47:12PM +0530, Manivannan Sadhasivam wrote:
> Hi Cristi,
> 
> On Wed, Aug 19, 2020 at 07:37:55PM +0300, Cristian Ciocaltea wrote:
> > This patch series adds support for the external interrupt controller
> > (SIRQ) found in the Actions Semi Owl family of SoC's (S500, S700 and
> > S900). The controller handles up to 3 external interrupt lines through
> > dedicated SIRQ pins.
> > 
> > This is a rework of the patch series submitted some time ago by 
> > Parthiban Nallathambi: 
> > https://lore.kernel.org/lkml/20181126100356.2840578-1-pn@xxxxxxx/
> > 
> 
> You need to preserve the authorship while reposting the patches. If you'd
> like to take the authorship intentionally then please explain the reason in
> cover letter.
> 
> Thanks,
> Mani

Thanks for pointing this out, I was not aware of the procedure - this is
actually my very first repost. Could you please indicate how should I
proceed to fix this? I had absolutely no intention to take the authorship..

Sorry for the mistake,
Cristi

> > Please note I have dropped, for the moment, the S700 related patches 
> > since I do not own a compatible hardware for testing. I'm using instead
> > an S500 SoC based board for which I have already provided the initial
> > support:
> > https://lore.kernel.org/lkml/cover.1592123160.git.cristian.ciocaltea@xxxxxxxxx/
> > 
> > The SIRQ controller support is a prerequisite of the soon to be submitted
> > MFD driver for the Actions Semi ATC260x PMICs.
> > 
> > Thanks and regards,
> > Cristi
> > 
> > Changes in v5:
> > - Integrated Marc's review (more details in the driver patch changelog)
> > - Rebased patch series on v5.9-rc1
> > 
> > Changes in v4:
> > - Simplified the DTS structure:
> >   * dropped 'actions,sirq-shared-reg' node, now the differentiation
> >     between SoC variants is handled now via the compatible property
> >   * dropped 'actions,sirq-reg-offset', now controller base address in
> >     DTS points to SIRQ0 register, so no additional information is
> >     required for S500 and S700, while for S900 SoC the offsets of SIRQ1
> >     and SIRQ2 regs are provided by the driver
> >   * 'actions,ext-irq-range' was replaced with 'actions,ext-interrupts',
> >     an array of the GIC interrupts triggered by the controller
> > - Fixed wrong INTC_EXTCTL_TYPE_MASK definition
> > - Removed redundant irq_fwspec checks in owl_sirq_domain_alloc()
> > - Improved error handling in owl_sirq_of_init()
> > - Added yaml binding document
> > - Dropped S700 related DTS patches for lack of testing hardware:
> >   * arm64: dts: actions: Add sirq node for Actions Semi S700
> >   * arm64: dts: actions: s700-cubieboard7: Enable SIRQ
> > - Updated MAINTAINERS
> > - Rebased patchset on kernel v5.8
> > - Cosmetic changes
> >  * Ordered include statements alphabetically
> >  * Added comment to owl_sirq_set_type() describing conversion of falling
> >    edge or active low signals
> >  * Replaced IRQF_TRIGGER_* with corresponding IRQ_TYPE_* variants
> >  * Ensured data types and function naming are consistent regarding the
> >    'owl_sirq' prefix
> > 
> > Changes in v3 (Parthiban Nallathambi):
> > - Set default operating frequency to 24MHz
> > - Falling edge and Low Level interrupts translated to rising edge and high level
> > - Introduced common function with lock handling for register read and write
> > - Used direct GIC interrupt number for interrupt local hwirq and finding offset
> > using DT entry (range) when registers are shared 
> > - Changed irq_ack to irq_eoi
> > - Added translation method for irq_domain_ops
> > - Clearing interrupt pending based on bitmask for edge triggered
> > - Added pinctrl definition for sirq for cubieboard7. This depends on,
> > https://lore.kernel.org/patchwork/patch/1012859/
> > 
> > Changes in v2 (Parthiban Nallathambi):
> > - Added SIRQ as hierarchical chip
> >         GIC <----> SIRQ <----> External interrupt controller/Child devices
> > - Device binding updates with vendor prefix
> > - Register sharing handled globally and common init sequence/data for all
> > actions SoC family
> > 
> > Cristian Ciocaltea (3):
> >   dt-bindings: interrupt-controller: Add Actions SIRQ controller binding
> >   irqchip: Add Actions Semi Owl SIRQ controller
> >   MAINTAINERS: Add entries for Actions Semi Owl SIRQ controller
> > 
> >  .../actions,owl-sirq.yaml                     |  68 ++++
> >  MAINTAINERS                                   |   2 +
> >  drivers/irqchip/Makefile                      |   1 +
> >  drivers/irqchip/irq-owl-sirq.c                | 347 ++++++++++++++++++
> >  4 files changed, 418 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml
> >  create mode 100644 drivers/irqchip/irq-owl-sirq.c
> > 
> > -- 
> > 2.28.0
> >