Re: [PATCH RFC 2/2] ARM: dts: imx: add devicetree for Tolino Shine 2 HD

[Andreas Kemnade]

On Sun, 23 Aug 2020 09:42:31 +0800
Shawn Guo <shawnguo@xxxxxxxxxx> wrote:

> On Sat, Aug 15, 2020 at 09:33:36PM +0200, Andreas Kemnade wrote:
> > This adds a devicetree for the Tolino Shine 2 HD Ebook reader. It is based
> > on boards marked with "37NB-E60QF0+4A2". It is equipped with an i.MX6SL
> > SoC.
> > 
> > Expected to work:
> > - Buttons
> > - Wifi
> > - Touchscreen
> > - LED
> > - uSD
> > - USB
> > - RTC
> > 
> > Not working due to missing drivers:
> > - Backlight (requires NTXEC driver)
> > - EPD
> > 
> > Not working due to unknown reasons:
> > - deep sleep (echo standby >/sys/power/state works),
> >   wakeup fails when imx_gpc_pre_suspend(true) was called.
> > 
> > Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
> > ---
> > Reason for RFC: The suspend trouble might be caused by bad devicetree.
> > But as the devicetree is already useful I decided to submit it.
> > 
> >  arch/arm/boot/dts/Makefile                   |   1 +
> >  arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts | 582 +++++++++++++++++++
> >  2 files changed, 583 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
> > 
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index e6a1cac0bfc7..c65fa3852246 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -581,6 +581,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
> >  	imx6qp-zii-rdu2.dtb
> >  dtb-$(CONFIG_SOC_IMX6SL) += \
> >  	imx6sl-evk.dtb \
> > +	imx6sl-tolino-shine2hd.dtb \
> >  	imx6sl-tolino-shine3.dtb \
> >  	imx6sl-warp.dtb
> >  dtb-$(CONFIG_SOC_IMX6SLL) += \
> > diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
> > new file mode 100644
> > index 000000000000..7b28e19a1d98
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
> > @@ -0,0 +1,582 @@
> > +// SPDX-License-Identifier: (GPL-2.0)
> > +/*
> > + * Device tree for the Tolino Shine 2 HD ebook reader
> > + *
> > + * Name on mainboard is: 37NB-E60QF0+4A2
> > + * Serials start with: E60QF2
> > + *
> > + * Copyright 2020 Andreas Kemnade
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include <dt-bindings/input/input.h>
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include "imx6sl.dtsi"
> > +
> > +/ {
> > +	model = "Tolino Shine 2 HD";
> > +	compatible = "kobo,tolino-shine2hd", "fsl,imx6sl";
> > +
> > +	chosen {
> > +		stdout-path = &uart1;
> > +	};
> > +
> > +	gpio_keys: gpio-keys {
> > +		compatible = "gpio-keys";
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&pinctrl_gpio_keys>;
> > +
> > +		cover {
> > +			label = "Cover";
> > +			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
> > +			linux,code = <SW_LID>;
> > +			linux,input-type = <EV_SW>;
> > +			wakeup-source;
> > +		};
> > +
> > +		fl {
> > +			label = "Frontlight";
> > +			gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
> > +			linux,code = <KEY_BRIGHTNESS_CYCLE>;
> > +		};
> > +
> > +		home {
> > +			label = "Home";
> > +			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
> > +			linux,code = <KEY_HOME>;
> > +		};
> > +
> > +		power {
> > +			label = "Power";
> > +			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
> > +			linux,code = <KEY_POWER>;
> > +			wakeup-source;
> > +		};
> > +	};
> > +
> > +	leds: leds {
> > +		compatible = "gpio-leds";
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&pinctrl_led>;
> > +
> > +		on {
> > +			label = "tolinoshine2hd:white:on";
> > +			gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
> > +			linux,default-trigger = "timer";
> > +		};
> > +	};
> > +
> > +	memory@80000000 {
> > +		device_type = "memory";
> > +		reg = <0x80000000 0x20000000>;
> > +	};
> > +
> > +	reg_wifi: regulator-wifi {
> > +		compatible = "regulator-fixed";
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&pinctrl_wifi_power>;
> > +		regulator-name = "SD3_SPWR";
> > +		regulator-min-microvolt = <3000000>;
> > +		regulator-max-microvolt = <3000000>;
> > +		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;  
> 
> Missing enable-active-high?
> 
no. I should rather use GPIO_ACTIVE_LOW to avoid that confusion.
corresponding code in vendor kernel is the function
_ntx_wifi_power_ctrl()


Regards,
Andreas