Re: [PATCH 02/22] dt-bindings: gpio: fsl-imx-gpio: Add gpio-ranges property

[Sascha Hauer]

On Mon, Aug 24, 2020 at 08:38:06AM +0200, Krzysztof Kozlowski wrote:
> On Mon, Aug 24, 2020 at 07:24:46AM +0200, Sascha Hauer wrote:
> > On Sun, Aug 23, 2020 at 06:15:30PM +0200, Krzysztof Kozlowski wrote:
> > > The GPIO controller node can have gpio-ranges property.  This fixes
> > > dtbs_check warnings like:
> > > 
> > >   arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml: gpio@30200000: 'gpio-ranges' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >     From schema: Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
> > > 
> > > Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> > > ---
> > >  .../devicetree/bindings/gpio/fsl-imx-gpio.yaml    | 15 +++++++++++++++
> > >  1 file changed, 15 insertions(+)
> > > 
> > > diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
> > > index 454db20c2d1a..1fac69573bb9 100644
> > > --- a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
> > > +++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
> > > @@ -51,6 +51,9 @@ properties:
> > >  
> > >    gpio-controller: true
> > >  
> > > +  gpio-ranges:
> > > +    maxItems: 1
> > > +
> > >  required:
> > >    - compatible
> > >    - reg
> > > @@ -62,6 +65,18 @@ required:
> > >  
> > >  additionalProperties: false
> > >  
> > > +allOf:
> > > +  - if:
> > > +      properties:
> > > +        compatible:
> > > +          contains:
> > > +            const: fsl,imx8mp-gpio
> > > +    then:
> > > +      properties:
> > > +        gpio-ranges:
> > > +          minItems: 1
> > > +          maxItems: 2
> > 
> > Why do you limit this to fsl,imx8mp-gpio? The i.MX5,6,7 dtsi files use
> > gpio-ranges as well and other i.MX dtsi files could also use it.
> 
> All other cases use maximum one element in gpio-ranges, so they are
> covered so I assumed they are continuous. But if it not the case, I can
> make all them maximum 2.

I misread this, I thought you allow gpio-ranges only for imx8mp, but
it's only the maxItems you set differently for that SoC. Anyway,
arch/arm/boot/dts/imx6dl.dtsi has this:

&gpio1 {
        gpio-ranges = <&iomuxc  0 131 2>, <&iomuxc  2 137 8>, <&iomuxc 10 189 2>,
                      <&iomuxc 12 194 1>, <&iomuxc 13 193 1>, <&iomuxc 14 192 1>,
                      <&iomuxc 15 191 1>, <&iomuxc 16 185 2>, <&iomuxc 18 184 1>,
                      <&iomuxc 19 187 1>, <&iomuxc 20 183 1>, <&iomuxc 21 188 1>,
                      <&iomuxc 22 123 3>, <&iomuxc 25 121 1>, <&iomuxc 26 127 1>,
                      <&iomuxc 27 126 1>, <&iomuxc 28 128 1>, <&iomuxc 29 130 1>,
                      <&iomuxc 30 129 1>, <&iomuxc 31 122 1>;
};

I don't think it makes sense to specify maxItems.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |