Re: [PATCH v2 4/4] arm64: dts: imx8mm-var-som-symphony: Add Variscite Symphony board with VAR-SOM-MX8MM

[Shawn Guo]

On Sun, Aug 23, 2020 at 10:58:47AM +0200, Krzysztof Kozlowski wrote:
> On Sun, Aug 23, 2020 at 10:00:51AM +0800, Shawn Guo wrote:
> > On Mon, Aug 17, 2020 at 09:01:20AM +0200, Krzysztof Kozlowski wrote:
> > > Add a DTS for Variscite Symphony evaluation kit with VAR-SOM-MX8MM
> > > System on Module.
> > > 
> > > Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> > > 
> > > ---
> > > 
> > > Changes since v1:
> > > 1. Remove duplicated "leds" node,
> > > 2. Fix heartbeat to active low,
> > > 3. Add nxp,ptn5150 extcon.
> > > ---
> > >  arch/arm64/boot/dts/freescale/Makefile        |   1 +
> > >  .../dts/freescale/imx8mm-var-som-symphony.dts | 248 ++++++++++++++++++
> > >  2 files changed, 249 insertions(+)
> > >  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
> > > 
> > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> > > index a39f0a1723e0..dcfb8750cd78 100644
> > > --- a/arch/arm64/boot/dts/freescale/Makefile
> > > +++ b/arch/arm64/boot/dts/freescale/Makefile
> > > @@ -29,6 +29,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
> > >  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
> > >  
> > >  dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
> > > +dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
> > >  dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
> > >  dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
> > >  dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
> > > new file mode 100644
> > > index 000000000000..2d3c30ac5e04
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
> > > @@ -0,0 +1,248 @@
> > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > > +/*
> > > + * Copyright (C) 2020 Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> > > + */
> > > +
> > > +/dts-v1/;
> > > +
> > > +#include "imx8mm-var-som.dtsi"
> > > +
> > > +/ {
> > > +	model = "Variscite VAR-SOM-MX8MM Symphony evaluation board";
> > > +	compatible = "variscite,var-som-mx8mm-symphony", "variscite,var-som-mx8mm", "fsl,imx8mm";
> > > +
> > > +	reg_usdhc2_vmmc: regulator-1 {
> > 
> > regulator-usdhc2-vmmc
> 
> You mean the node name? If so, it's not correct with device tree
> specification:
> "The node-name (...) should describe the general class of device.:
> If appropriate, the name should be one of the following choices:
> (...)
>  - regulator"
> 
> Adding specific function/type/usage to the name of the node is a
> opposite choice to "general class".

Well, the node is named in general class, i.e. regulator-xxx, and we
would like the suffix to be a bit more specific.  We have been using
this name schema for fixed-regulator on i.MX platforms for long time.

Shawn