[PATCH 16/29] 8390: Avoid comma separated statements

[Joe Perches]

Use semicolons and braces.

Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
---
 drivers/net/ethernet/8390/axnet_cs.c | 19 ++++++++++++-------
 drivers/net/ethernet/8390/lib8390.c  | 14 +++++++++-----
 drivers/net/ethernet/8390/pcnet_cs.c |  6 ++++--
 3 files changed, 25 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/8390/axnet_cs.c b/drivers/net/ethernet/8390/axnet_cs.c
index a00b36f91d9f..d041b6dda012 100644
--- a/drivers/net/ethernet/8390/axnet_cs.c
+++ b/drivers/net/ethernet/8390/axnet_cs.c
@@ -657,8 +657,10 @@ static void block_input(struct net_device *dev, int count,
     outb_p(E8390_RREAD+E8390_START, nic_base + AXNET_CMD);
 
     insw(nic_base + AXNET_DATAPORT,buf,count>>1);
-    if (count & 0x01)
-	buf[count-1] = inb(nic_base + AXNET_DATAPORT), xfer_count++;
+    if (count & 0x01) {
+	buf[count-1] = inb(nic_base + AXNET_DATAPORT);
+	xfer_count++;
+    }
 
 }
 
@@ -1270,10 +1272,12 @@ static void ei_tx_intr(struct net_device *dev)
 			ei_local->txing = 1;
 			NS8390_trigger_send(dev, ei_local->tx2, ei_local->tx_start_page + 6);
 			netif_trans_update(dev);
-			ei_local->tx2 = -1,
+			ei_local->tx2 = -1;
 			ei_local->lasttx = 2;
-		}
-		else ei_local->lasttx = 20, ei_local->txing = 0;	
+		} else {
+			ei_local->lasttx = 20;
+			ei_local->txing = 0;
+		}	
 	}
 	else if (ei_local->tx2 < 0) 
 	{
@@ -1289,9 +1293,10 @@ static void ei_tx_intr(struct net_device *dev)
 			netif_trans_update(dev);
 			ei_local->tx1 = -1;
 			ei_local->lasttx = 1;
+		} else {
+			ei_local->lasttx = 10;
+			ei_local->txing = 0;
 		}
-		else
-			ei_local->lasttx = 10, ei_local->txing = 0;
 	}
 //	else
 //		netdev_warn(dev, "unexpected TX-done interrupt, lasttx=%d\n",
diff --git a/drivers/net/ethernet/8390/lib8390.c b/drivers/net/ethernet/8390/lib8390.c
index babc92e2692e..1f48d7f6365c 100644
--- a/drivers/net/ethernet/8390/lib8390.c
+++ b/drivers/net/ethernet/8390/lib8390.c
@@ -597,10 +597,12 @@ static void ei_tx_intr(struct net_device *dev)
 			ei_local->txing = 1;
 			NS8390_trigger_send(dev, ei_local->tx2, ei_local->tx_start_page + 6);
 			netif_trans_update(dev);
-			ei_local->tx2 = -1,
+			ei_local->tx2 = -1;
 			ei_local->lasttx = 2;
-		} else
-			ei_local->lasttx = 20, ei_local->txing = 0;
+		} else {
+			ei_local->lasttx = 20;
+			ei_local->txing = 0;
+		}
 	} else if (ei_local->tx2 < 0) {
 		if (ei_local->lasttx != 2  &&  ei_local->lasttx != -2)
 			pr_err("%s: bogus last_tx_buffer %d, tx2=%d\n",
@@ -612,8 +614,10 @@ static void ei_tx_intr(struct net_device *dev)
 			netif_trans_update(dev);
 			ei_local->tx1 = -1;
 			ei_local->lasttx = 1;
-		} else
-			ei_local->lasttx = 10, ei_local->txing = 0;
+		} else {
+			ei_local->lasttx = 10;
+			ei_local->txing = 0;
+		}
 	} /* else
 		netdev_warn(dev, "unexpected TX-done interrupt, lasttx=%d\n",
 			    ei_local->lasttx);
diff --git a/drivers/net/ethernet/8390/pcnet_cs.c b/drivers/net/ethernet/8390/pcnet_cs.c
index 164c3ed550bf..9d3b1e0e425c 100644
--- a/drivers/net/ethernet/8390/pcnet_cs.c
+++ b/drivers/net/ethernet/8390/pcnet_cs.c
@@ -1178,8 +1178,10 @@ static void dma_block_input(struct net_device *dev, int count,
     outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD);
 
     insw(nic_base + PCNET_DATAPORT,buf,count>>1);
-    if (count & 0x01)
-	buf[count-1] = inb(nic_base + PCNET_DATAPORT), xfer_count++;
+    if (count & 0x01) {
+	buf[count-1] = inb(nic_base + PCNET_DATAPORT);
+	xfer_count++;
+    }
 
     /* This was for the ALPHA version only, but enough people have been
        encountering problems that it is still here. */
-- 
2.26.0