Re: [PATCH v1 1/1] extcon: ptn5150: Add usb-typec support for Intel LGM SoC

[Chanwoo Choi]

Hi,

On 8/25/20 5:31 PM, Ramuthevar,Vadivel MuruganX wrote:
> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
> 
> Add usb-typec detection support for Intel LGM SoC based
> boards.
> 
> Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
> ---
>  drivers/extcon/extcon-ptn5150.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/extcon/extcon-ptn5150.c b/drivers/extcon/extcon-ptn5150.c
> index 8ba706fad887..60355a1b5cb2 100644
> --- a/drivers/extcon/extcon-ptn5150.c
> +++ b/drivers/extcon/extcon-ptn5150.c
> @@ -300,6 +300,8 @@ static int ptn5150_i2c_probe(struct i2c_client *i2c)
>  		return ret;
>  	}
>  
> +	extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
> +				       EXTCON_PROP_USB_TYPEC_POLARITY);

extcon_set_property_capability() just sets the capability
of EXTCON_PROP_USB_TYPEC_POLARITY property.

If you want to set the value (0 or 1) of EXTCON_PROP_USB_TYPEC_POLARITY,
we have to call extcon_set_property() function. But, this patch doesn't
set the any value of EXTCON_PROP_USB_TYPEC_POLARITY property.

Why do you only use extcon_set_property_capability()
without the proper extcon_set_property()?

>  	/* Initialize PTN5150 device and print vendor id and version id */
>  	ret = ptn5150_init_dev_type(info);
>  	if (ret)
> 


-- 
Best Regards,
Chanwoo Choi
Samsung Electronics