Re: [PATCH v2 0/6] dmaengine: axi-dmac: add support for reading bus attributes from register

[Alexandru Ardelean]

On Tue, Aug 25, 2020 at 6:14 PM Alexandru Ardelean
<ardeleanalex@xxxxxxxxx> wrote:
>
> On Tue, Aug 25, 2020 at 5:46 PM Vinod Koul <vkoul@xxxxxxxxxx> wrote:
> >
> > On 25-08-20, 15:48, Alexandru Ardelean wrote:
> > > The series adds support for reading the DMA bus attributes from the
> > > INTERFACE_DESCRIPTION (0x10) register.
> > >
> > > The first 5 changes are a bit of rework prior to adding the actual
> > > change in patch 6, as things need to be shifted around a bit, to enable
> > > the clock to be enabled earlier, to be able to read the version
> > > register.
> >
> > Not sure what happened, I see two sets of patches in this series, maybe
> > duplicate..? Better to resend a clean version..
> >
> > Even PW shows 12 patches https://patchwork.kernel.org/project/linux-dmaengine/list/
>
> I'm not sure either.
> I checked the folder from where I sent the patches.
> They're still there, and only 6 { + cover letter].
>
> Will re-send.

My bad.
In the bash history I found that I put *.patch & v2-*.patch when sending.
They were mixed in with some CC'ed emails so I didn't see it before.

>
> >
> > Thanks
> >
> > >
> > > Changelog v1 -> v2:
> > > * fixed error-exit paths for the clock move patch
> > >   i.e. 'dmaengine: axi-dmac: move clock enable earlier'
> > > * fixed error-exit path for patch
> > >   'axi-dmac: wrap channel parameter adjust into function'
> > > * added patch 'dmaengine: axi-dmac: move active_descs list init after device-tree init'
> > >   the list of active_descs can be moved a bit lower in the init/probe
> > >
> > > Alexandru Ardelean (6):
> > >   dmaengine: axi-dmac: move version read in probe
> > >   dmaengine: axi-dmac: move active_descs list init after device-tree
> > >     init
> > >   dmaengine: axi-dmac: move clock enable earlier
> > >   dmaengine: axi-dmac: wrap entire dt parse in a function
> > >   dmaengine: axi-dmac: wrap channel parameter adjust into function
> > >   dmaengine: axi-dmac: add support for reading bus attributes from
> > >     registers
> > >
> > >  drivers/dma/dma-axi-dmac.c | 138 ++++++++++++++++++++++++++++---------
> > >  1 file changed, 107 insertions(+), 31 deletions(-)
> > >
> > > --
> > > 2.17.1
> >
> > --
> > ~Vinod