[PATCH 4/4] ARM: dts: r8a7742-iwg21d-q7: Enable SD2 LED indication

[Lad Prabhakar]

Add support for LED trigger on SD2 interface.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Reviewed-by: Chris Paterson <Chris.Paterson2@xxxxxxxxxxx>
---
 arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
index 070fc9729b39..6d31d2401481 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -63,6 +63,16 @@
 		enable-gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		sdhi2_led {
+			label = "sdio-led";
+			gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc1";
+		};
+	};
+
 	lvds-receiver {
 		compatible = "ti,ds90cf384a", "lvds-decoder";
 		vcc-supply = <&vcc_3v3_tft1>;
-- 
2.17.1