Re: [PATCH v1 3/9] extcon: extcon-ptn5150: Switch to BIT() macro for cable attach

[Krzysztof Kozlowski]

On Tue, Aug 18, 2020 at 02:57:21PM +0800, Ramuthevar,Vadivel MuruganX wrote:
> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
> 
> Switch to BIT() macro for the cable attach.

Squash it.

> 
> Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
> ---
>  drivers/extcon/extcon-ptn5150.c | 4 +---
>  1 file changed, 1 insertion(+), 3 deletions(-)
> 
> diff --git a/drivers/extcon/extcon-ptn5150.c b/drivers/extcon/extcon-ptn5150.c
> index c816a6c1e05c..fab862d9aad8 100644
> --- a/drivers/extcon/extcon-ptn5150.c
> +++ b/drivers/extcon/extcon-ptn5150.c
> @@ -44,9 +44,7 @@ enum ptn5150_reg {
>  
>  #define PTN5150_REG_CC_VBUS_DETECTION		BIT(7)
>  
> -#define PTN5150_REG_INT_CABLE_ATTACH_SHIFT	0
> -#define PTN5150_REG_INT_CABLE_ATTACH_MASK	\
> -	(0x1 << PTN5150_REG_INT_CABLE_ATTACH_SHIFT)
> +#define PTN5150_REG_INT_CABLE_ATTACH_MASK	BIT(0)
>  
>  #define PTN5150_REG_INT_CABLE_DETACH_SHIFT	1
>  #define PTN5150_REG_INT_CABLE_DETACH_MASK	\
> -- 
> 2.11.0
>