[PATCH v2] mfd: dm355evm_msp: Convert LEDs to GPIO descriptor table

[Linus Walleij]

This converts the DaVinci DM355EVM LEDs to use GPIO
descriptor look-ups.

Cc: Sekhar Nori <nsekhar@xxxxxx>
Cc: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
ChangeLog v1->v2:
- Moved out all the tables and device definition to the top
  of the file to not have static locals inside the function.
---
 drivers/mfd/dm355evm_msp.c | 76 +++++++++++++++++++++++++-------------
 1 file changed, 50 insertions(+), 26 deletions(-)

diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c
index 151c36ce7343..54fb6cbd2aa0 100644
--- a/drivers/mfd/dm355evm_msp.c
+++ b/drivers/mfd/dm355evm_msp.c
@@ -12,6 +12,7 @@
 #include <linux/module.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/leds.h>
 #include <linux/i2c.h>
 #include <linux/mfd/dm355evm_msp.h>
@@ -116,6 +117,54 @@ static const u8 msp_gpios[] = {
 	MSP_GPIO(4, SDMMC), MSP_GPIO(3, SDMMC),	/* mmc1 WP, nCD */
 };
 
+static struct gpio_led evm_leds[] = {
+	{ .name = "dm355evm::ds14",
+	  .default_trigger = "heartbeat", },
+	{ .name = "dm355evm::ds15",
+	  .default_trigger = "mmc0", },
+	{ .name = "dm355evm::ds16",
+	  /* could also be a CE-ATA drive */
+	  .default_trigger = "mmc1", },
+	{ .name = "dm355evm::ds17",
+	  .default_trigger = "nand-disk", },
+	{ .name = "dm355evm::ds18", },
+	{ .name = "dm355evm::ds19", },
+	{ .name = "dm355evm::ds20", },
+	{ .name = "dm355evm::ds21", },
+};
+
+static struct gpio_led_platform_data evm_led_data = {
+	.num_leds	= ARRAY_SIZE(evm_leds),
+	.leds		= evm_leds,
+};
+
+static struct gpiod_lookup_table evm_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		/*
+		 * These GPIOs are on the dm355evm_msp
+		 * GPIO chip at index 0..7
+		 */
+		GPIO_LOOKUP_IDX("dm355evm_msp", 0, NULL,
+				0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("dm355evm_msp", 1, NULL,
+				1, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("dm355evm_msp", 2, NULL,
+				2, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("dm355evm_msp", 3, NULL,
+				3, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("dm355evm_msp", 4, NULL,
+				4, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("dm355evm_msp", 5, NULL,
+				5, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("dm355evm_msp", 6, NULL,
+				6, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("dm355evm_msp", 7, NULL,
+				7, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 #define MSP_GPIO_REG(offset)	(msp_gpios[(offset)] >> 3)
 #define MSP_GPIO_MASK(offset)	BIT(msp_gpios[(offset)] & 0x07)
 
@@ -260,32 +309,7 @@ static int add_children(struct i2c_client *client)
 
 	/* LED output */
 	if (msp_has_leds()) {
-#define GPIO_LED(l)	.name = l, .active_low = true
-		static struct gpio_led evm_leds[] = {
-			{ GPIO_LED("dm355evm::ds14"),
-				.default_trigger = "heartbeat", },
-			{ GPIO_LED("dm355evm::ds15"),
-				.default_trigger = "mmc0", },
-			{ GPIO_LED("dm355evm::ds16"),
-				/* could also be a CE-ATA drive */
-				.default_trigger = "mmc1", },
-			{ GPIO_LED("dm355evm::ds17"),
-				.default_trigger = "nand-disk", },
-			{ GPIO_LED("dm355evm::ds18"), },
-			{ GPIO_LED("dm355evm::ds19"), },
-			{ GPIO_LED("dm355evm::ds20"), },
-			{ GPIO_LED("dm355evm::ds21"), },
-		};
-#undef GPIO_LED
-
-		struct gpio_led_platform_data evm_led_data = {
-			.num_leds	= ARRAY_SIZE(evm_leds),
-			.leds		= evm_leds,
-		};
-
-		for (i = 0; i < ARRAY_SIZE(evm_leds); i++)
-			evm_leds[i].gpio = i + dm355evm_msp_gpio.base;
-
+		gpiod_add_lookup_table(&evm_leds_gpio_table);
 		/* NOTE:  these are the only fully programmable LEDs
 		 * on the board, since GPIO-61/ds22 (and many signals
 		 * going to DC7) must be used for AEMIF address lines
-- 
2.26.2